From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Jon Hunter <jonathanh@nvidia.com>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 2/2] ARM: dts: r8a7779: Correct interrupt type for ARM TWD
Date: Fri, 18 Mar 2016 11:19:21 +0100 [thread overview]
Message-ID: <1458296361-4468-3-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1458296361-4468-1-git-send-email-geert+renesas@glider.be>
The ARM TWD interrupt is a private peripheral interrupt (PPI), and per
the ARM GIC documentation, whether the type for PPIs can be set is
IMPLEMENTATION DEFINED.
For R-Car H1 devices the PPI type cannot be set, and so when we attempt
to set the type for the ARM TWD interrupt it fails. This has gone
unnoticed because it fails silently, and because we cannot re-configure
the type it has had no impact. Nevertheless fix the type for the TWD
interrupt so that it matches the hardware configuration.
Based on patches by Jon Hunter for Tegra20/30 and OMAP4.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Exposed by Jon Hunter's "[PATCH 04/15] irqchip/gic: WARN if setting the
interrupt type fails":
WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-gic-common.c:61 gic_configure_irq+0x64/0x7c()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-marzen-00426-g226dd0f378de2fe5-dirty #87
Hardware name: Generic R8A7779 (Flattened Device Tree)
[<c010fb54>] (unwind_backtrace) from [<c010b614>] (show_stack+0x10/0x14)
[<c010b614>] (show_stack) from [<c02f362c>] (dump_stack+0xa4/0xdc)
[<c02f362c>] (dump_stack) from [<c0121d88>] (warn_slowpath_common+0x84/0xb0)
[<c0121d88>] (warn_slowpath_common) from [<c0121e44>] (warn_slowpath_null+0x18/0x20)
[<c0121e44>] (warn_slowpath_null) from [<c03171cc>] (gic_configure_irq+0x64/0x7c)
[<c03171cc>] (gic_configure_irq) from [<c0316878>] (gic_set_type+0x48/0x60)
[<c0316878>] (gic_set_type) from [<c016fa98>] (__irq_set_trigger+0xac/0x17c)
[<c016fa98>] (__irq_set_trigger) from [<c016feac>] (__setup_irq+0x344/0x5d8)
[<c016feac>] (__setup_irq) from [<c017042c>] (request_percpu_irq+0x98/0xe0)
[<c017042c>] (request_percpu_irq) from [<c0804dd8>] (twd_local_timer_common_register+0x38/0x1ac)
[<c0804dd8>] (twd_local_timer_common_register) from [<c0804f94>] (twd_local_timer_of_register+0x48/0x70)
[<c0804f94>] (twd_local_timer_of_register) from [<c081c04c>] (clocksource_probe+0x48/0x88)
[<c081c04c>] (clocksource_probe) from [<c0800b14>] (start_kernel+0x24c/0x3cc)
[<c0800b14>] (start_kernel) from [<6000807c>] (0x6000807c)
---
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 540f3c57a7b32356..2581363879d9dfff 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -71,7 +71,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg_clocks R8A7779_CLK_ZS>;
};
--
1.9.1
next prev parent reply other threads:[~2016-03-18 10:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 10:19 [PATCH 0/2] ARM: dts: shmobile: Correct interrupt type for ARM TWD Geert Uytterhoeven
2016-03-18 10:19 ` [PATCH 1/2] ARM: dts: sh73a0: " Geert Uytterhoeven
2016-03-18 10:19 ` Geert Uytterhoeven [this message]
2016-03-22 1:28 ` [PATCH 0/2] ARM: dts: shmobile: " Simon Horman
2016-03-22 8:43 ` Geert Uytterhoeven
2016-03-23 0:48 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458296361-4468-3-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).