From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: Krzysztof Adamski <k@japko.eu>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Reinder de Haan
<patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 3/8] ARM: dts: sun8i: Add usbphy and usb host controller nodes
Date: Sun, 20 Mar 2016 17:00:31 +0100 [thread overview]
Message-ID: <1458489636-2825-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1458489636-2825-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
Add nodes describing the H3's usbphy and usb host controller nodes.
Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 101 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 3a2e6e2..4a4926b 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -389,6 +389,107 @@
#size-cells = <0>;
};
+ usbphy: phy@01c19400 {
+ compatible = "allwinner,sun8i-h3-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>,
+ <0x01c1c800 0x4>,
+ <0x01c1d800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2",
+ "pmu3";
+ clocks = <&usb_clk 8>,
+ <&usb_clk 9>,
+ <&usb_clk 10>,
+ <&usb_clk 11>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb3_phy";
+ resets = <&usb_clk 0>,
+ <&usb_clk 1>,
+ <&usb_clk 2>,
+ <&usb_clk 3>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset",
+ "usb3_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci1: usb@01c1b000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 25>, <&bus_gates 29>;
+ resets = <&ahb_rst 25>, <&ahb_rst 29>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@01c1b400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 29>, <&bus_gates 25>,
+ <&usb_clk 17>;
+ resets = <&ahb_rst 29>, <&ahb_rst 25>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci2: usb@01c1c000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1c000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 26>, <&bus_gates 30>;
+ resets = <&ahb_rst 26>, <&ahb_rst 30>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@01c1c400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 30>, <&bus_gates 26>,
+ <&usb_clk 18>;
+ resets = <&ahb_rst 30>, <&ahb_rst 26>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci3: usb@01c1d000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1d000 0x100>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 27>, <&bus_gates 31>;
+ resets = <&ahb_rst 27>, <&ahb_rst 31>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci3: usb@01c1d400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1d400 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bus_gates 31>, <&bus_gates 27>,
+ <&usb_clk 19>;
+ resets = <&ahb_rst 31>, <&ahb_rst 27>;
+ phys = <&usbphy 3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun8i-h3-pinctrl";
reg = <0x01c20800 0x400>;
--
2.7.3
next prev parent reply other threads:[~2016-03-20 16:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-20 16:00 [PATCH 0/8] ARM: dts: sun8i: Orangepi Plus dts improvements Hans de Goede
[not found] ` <1458489636-2825-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-03-20 16:00 ` [PATCH 1/8] ARM: dts: sun8i: Add mmc2_8bit_pins to sun8i-h3.dtsi Hans de Goede
2016-03-20 16:00 ` [PATCH 2/8] ARM: dts: sun8i: Add support for H3 usb clocks Hans de Goede
2016-03-20 16:00 ` Hans de Goede [this message]
2016-03-20 16:00 ` [PATCH 4/8] ARM: dts: sun8i: Enable USB host controllers on Orangepi Plus boards Hans de Goede
2016-03-20 16:00 ` [PATCH 5/8] ARM: dts: sun8i: Enable IR receiver " Hans de Goede
2016-03-20 16:00 ` [PATCH 6/8] ARM: dts: sun8i: Add leds and switches " Hans de Goede
2016-03-20 16:00 ` [PATCH 7/8] ARM: dts: sun8i: Add wifi dt node " Hans de Goede
2016-03-20 16:00 ` [PATCH 8/8] ARM: dts: sun8i: Add eMMC " Hans de Goede
2016-03-20 16:05 ` [PATCH 0/8] ARM: dts: sun8i: Orangepi Plus dts improvements Chen-Yu Tsai
[not found] ` <CAGb2v65THg3fcdTJvFBCxxbSU_vOWmB9tP4f2QUbPyUU9D=zig-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-20 18:41 ` Hans de Goede
2016-03-21 8:03 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458489636-2825-4-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=k@japko.eu \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).