From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Brodkin Subject: [PATCH 2/5 v4] drm: Add DT bindings documentation for ARC PGU display controller Date: Thu, 24 Mar 2016 19:48:33 +0300 Message-ID: <1458838116-24954-3-git-send-email-abrodkin@synopsys.com> References: <1458838116-24954-1-git-send-email-abrodkin@synopsys.com> Return-path: In-Reply-To: <1458838116-24954-1-git-send-email-abrodkin-HKixBCOQz3hWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Alexey Brodkin , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org This add DT bindings documentation for ARC PGU display controller. Signed-off-by: Alexey Brodkin Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org --- Changes v3 -> v4: (addressing Rob's comments) * Removed "encoder-slave" from required properties * Removed "0x" from node names Changes v2 -> v3: * Reverted back to initial larger version of example with minor fixes (thanks Rob for spotting those). Changes v1 -> v2: * Removed everything except PGU node itself. .../devicetree/bindings/display/snps,arcpgu.txt | 71 ++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt new file mode 100644 index 0000000..b126577 --- /dev/null +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt @@ -0,0 +1,71 @@ +ARC PGU + +This is a display controller found on several development boards produced +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a +framebuffer and sends it to a single digital encoder (usually HDMI). + +Required properties: + - compatible: "snps,arcpgu" + - reg: Physical base address and length of the controller's registers. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ARC PGU it should contain: + - "pxlclk" for the clock feeding the output PLL of the controller. + +Required sub-nodes: + - port: The PGU connection to an encoder chip. + +Example: + +/ { + ... + + pgu@XXXXXXXX { + compatible = "snps,arcpgu"; + reg = <0xXXXXXXXX 0x400>; + clocks = <&clock_node>; + clock-names = "pxlclk"; + encoder-slave = <&encoder_node>; + + port { + pgu_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c@XXXXXXXX { + compatible = "..."; + + encoder_node:hdmi@XX{ + compatible="..."; + + ports { + port@0 { + reg = <0>; + hdmi_enc_input:endpoint { + remote-endpoint = <&pgu_output>; + }; + }; + + port@1 { + reg = <1>; + hdmi_enc_output:endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + } + + hdmi0: connector { + compatible = "hdmi-connector"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_enc_output>; + }; + }; + }; +}; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html