[PATCH v3 02/18] dt-bindings: timer: sp804: add new compatible for OX810SE SoC

[PATCH v3 02/18] dt-bindings: timer: sp804: add new compatible for OX810SE SoC

[Neil Armstrong]

Add new oxsemi,ox810se-rps-timer compatible string to support the
PLX Technology OX810SE SoC Dual Timers variant.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/timer/arm,sp804.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt
index 5cd8eee7..ebe8753 100644
--- a/Documentation/devicetree/bindings/timer/arm,sp804.txt
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt
@@ -2,7 +2,7 @@ ARM sp804 Dual Timers
 ---------------------------------------
 
 Required properties:
-- compatible: Should be "arm,sp804" & "arm,primecell"
+- compatible: Should be "arm,sp804" & "arm,primecell", or "oxsemi,ox810se-rps-timer"
 - interrupts: Should contain the list of Dual Timer interrupts. This is the
 	interrupt for timer 1 and timer 2. In the case of a single entry, it is
 	the combined interrupt or if "arm,sp804-has-irq" is present that
-- 
1.9.1

[PATCH v3 04/18] dt-bindings: irq: arm, versatile-fpga: add compatible string for OX810SE SoC

[Neil Armstrong]

Under the OX810SE, this same controller is used as "Reference Peripheral
Specification" Interrupt Controller, so add new compatible string to support
the PLX Technology OX810SE SoC Interrupt Controller.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
index c9cf605..2a1d16b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
@@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
 instance can handle up to 32 interrupts.
 
 Required properties:
-- compatible: "arm,versatile-fpga-irq"
+- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq"
 - interrupt-controller: Identifies the node as an interrupt controller
 - #interrupt-cells: The number of cells to define the interrupts.  Must be 1
   as the FPGA IRQ controller has no configuration options for interrupt
-- 
1.9.1

[PATCH v3 05/18] dt-bindings: vendor-prefixes: Add PLX Technology

[Neil Armstrong]

Add PLX Technology vendor prefix.
Fixed "pixdir" alphabetizing.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 42adb41..24b2100 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -180,9 +180,10 @@ parade	Parade Technologies Inc.
 pericom	Pericom Technology Inc.
 phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
+pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 plathome	Plat'Home Co., Ltd.
 plda	PLDA
-pixcir  PIXCIR MICROELECTRONICS Co., Ltd
+plxtech	PLX Technology, Inc.
 pulsedlight	PulsedLight, Inc
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
-- 
1.9.1

[PATCH v3 06/18] dt-bindings: Add Oxford Semiconductors to vendor prefixes

[Neil Armstrong]

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 24b2100..57c04e4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -175,6 +175,7 @@ option	Option NV
 ortustech	Ortus Technology Co., Ltd.
 ovti	OmniVision Technologies
 ORCL	Oracle Corporation
+oxsemi	Oxford Semiconductors, Ltd.
 panasonic	Panasonic Corporation
 parade	Parade Technologies Inc.
 pericom	Pericom Technology Inc.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 08/18] dt-bindings: Add PLX Technology Reset Controller bindings

[Neil Armstrong]

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/reset/plxtech,reset.txt    | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/plxtech,reset.txt

diff --git a/Documentation/devicetree/bindings/reset/plxtech,reset.txt b/Documentation/devicetree/bindings/reset/plxtech,reset.txt
new file mode 100644
index 0000000..581c974
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/plxtech,reset.txt
@@ -0,0 +1,58 @@
+PLX Technology OXNAS SoC Family RESET Controller
+================================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-reset"
+- #reset-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+
+For OX810SE, the indices are :
+ - 0 : ARM
+ - 1 : COPRO
+ - 2 : Reserved
+ - 3 : Reserved
+ - 4 : USBHS
+ - 5 : USBHSPHY
+ - 6 : MAC
+ - 7 : PCI
+ - 8 : DMA
+ - 9 : DPE
+ - 10 : DDR
+ - 11 : SATA
+ - 12 : SATA_LINK
+ - 13 : SATA_PHY
+ - 14 : Reserved
+ - 15 : NAND
+ - 16 : GPIO
+ - 17 : UART1
+ - 18 : UART2
+ - 19 : MISC
+ - 20 : I2S
+ - 21 : AHB_MON
+ - 22 : UART3
+ - 23 : UART4
+ - 24 : SGDMA
+ - 25 : Reserved
+ - 26 : Reserved
+ - 27 : Reserved
+ - 28 : Reserved
+ - 29 : Reserved
+ - 30 : Reserved
+ - 31 : BUS
+
+example:
+
+sys: sys-ctrl@000000 {
+	compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+	reg = <0x000000 0x100000>;
+
+	reset: reset-controller {
+		compatible = "oxsemi,ox810se-reset";
+		#reset-cells = <1>;
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 10/18] dt-bindings: Add PLX Technology OXNAS Standard Clocks bindings

[Neil Armstrong]

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../devicetree/bindings/clock/plxtech,stdclk.txt   | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/plxtech,stdclk.txt

diff --git a/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt b/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
new file mode 100644
index 0000000..c60b459
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/plxtech,stdclk.txt
@@ -0,0 +1,35 @@
+PLX Technology OXNAS SoC Family Standard Clocks
+================================================
+
+Please also refer to clock-bindings.txt in this directory for common clock
+bindings usage.
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-stdclk"
+- #clock-cells: 1, see below
+
+Parent node should have the following properties :
+- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
+
+For OX810SE, the clock indices are :
+ - 0: LEON
+ - 1: DMA_SGDMA
+ - 2: CIPHER
+ - 3: SATA
+ - 4: AUDIO
+ - 5: USBMPH
+ - 6: ETHA
+ - 7: PCIA
+ - 8: NAND
+
+example:
+
+sys: sys-ctrl@000000 {
+	compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+	reg = <0x000000 0x100000>;
+
+	stdclk: stdclk {
+		compatible = "oxsemi,ox810se-stdclk";
+		#clock-cells = <1>;
+	};
+};
-- 
1.9.1

[PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Neil Armstrong]

Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.

Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/gpio/gpio_oxnas.txt        | 47 ++++++++++++++++++
 .../bindings/pinctrl/plxtech,pinctrl.txt           | 57 ++++++++++++++++++++++
 2 files changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
new file mode 100644
index 0000000..4530fa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
@@ -0,0 +1,47 @@
+* PLX Technology OXNAS SoC GPIO Controller
+
+Required properties:
+ - compatible: "oxsemi,ox810se-gpio"
+ - reg: Base address and length for the device.
+ - interrupts: The port interrupt shared by all pins.
+ - gpio-controller: Marks the port as GPIO controller.
+ - #gpio-cells: Two. The first cell is the pin number and
+   the second cell is used to specify the gpio polarity as defined in
+   defined in <dt-bindings/gpio/gpio.h>:
+      0 = GPIO_ACTIVE_HIGH
+      1 = GPIO_ACTIVE_LOW
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - #interrupt-cells: Two. The first cell is the GPIO number and second cell
+   is used to specify the trigger type as defined in
+   <dt-bindings/interrupt-controller/irq.h>:
+      IRQ_TYPE_EDGE_RISING
+      IRQ_TYPE_EDGE_FALLING
+      IRQ_TYPE_EDGE_BOTH
+ - plxtech,gpio-bank: Specifies which bank a controller owns.
+ - gpio-ranges: Interaction with the PINCTRL subsystem.
+ - ngpios: Specifies the gpio lines count in this specific bank.
+
+Example:
+
+gpio0: gpio@0 {
+	compatible = "oxsemi,ox810se-gpio";
+	reg = <0x000000 0x100000>;
+	interrupts = <21>;
+	#gpio-cells = <2>;
+	gpio-controller;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	plxtech,gpio-bank = <0>;
+	gpio-ranges = <&pinctrl 0 0 32>;
+	ngpios = <32>;
+};
+
+keys {
+	...
+
+	button@sw1 {
+		label = "ESC";
+		linux,code = <1>;
+		gpios = <&gpio0 12 0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
new file mode 100644
index 0000000..dc4907b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
@@ -0,0 +1,57 @@
+* PLX Technology OXNAS SoC Family Pin Controller
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+OXNAS 'pin configuration node' is a node of a group of pins which can be
+used for a specific device or function. This node represents configurations of
+pins, optional function, and optional mux related configuration.
+
+Required properties for pin controller node:
+ - compatible: "oxsemi,ox810se-pinctrl"
+ - plxtech,sys-ctrl: a phandle to the system controller syscon node
+
+Required properties for pin configuration sub-nodes:
+ - pins: List of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins.
+ - bias-pull-up: Enable weak pull-up.
+
+Example:
+
+pinctrl: pinctrl {
+	compatible = "oxsemi,ox810se-pinctrl";
+
+	/* Regmap for sys registers */
+	plxtech,sys-ctrl = <&sys>;
+
+	pinctrl_uart2: pinctrl_uart2 {
+		uart2a {
+			pins = "gpio31";
+			function = "fct3";
+		};
+		uart2b {
+			pins = "gpio32";
+			function = "fct3";
+		};
+	};
+};
+
+uart2: serial@900000 {
+	compatible = "ns16550a";
+	reg = <0x900000 0x100000>;
+	clocks = <&sysclk>;
+	interrupts = <29>;
+	reg-shift = <0>;
+	fifo-size = <16>;
+	reg-io-width = <1>;
+	current-speed = <115200>;
+	no-loopback-test;
+	status = "disabled";
+	resets = <&reset 22>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 15/18] arm: boot: dts: Add PLX Technology OX810SE dtsi

[Neil Armstrong]

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/boot/dts/ox810se.dtsi | 336 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 336 insertions(+)
 create mode 100644 arch/arm/boot/dts/ox810se.dtsi

diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
new file mode 100644
index 0000000..93286e9
--- /dev/null
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -0,0 +1,336 @@
+/*
+ * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "oxsemi,ox810se";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			clocks = <&armclk>;
+		};
+	};
+
+	memory {
+		/* Max 256MB @ 0x48000000 */
+		reg = <0x48000000 0x10000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		rpsclk: rpsclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		pll400: pll400 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <733333333>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox810se-pinctrl";
+
+				/* Regmap for sys registers */
+				plxtech,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0a {
+						pins = "gpio31";
+						function = "fct3";
+					};
+					uart0b {
+						pins = "gpio32";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0c {
+						pins = "gpio27";
+						function = "fct3";
+					};
+					uart0d {
+						pins = "gpio28";
+						function = "fct3";
+					};
+					uart0e {
+						pins = "gpio29";
+						function = "fct3";
+					};
+					uart0f {
+						pins = "gpio30";
+						function = "fct3";
+					};
+					uart0g {
+						pins = "gpio33";
+						function = "fct3";
+					};
+					uart0h {
+						pins = "gpio34";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1a {
+						pins = "gpio20";
+						function = "fct3";
+					};
+					uart1b {
+						pins = "gpio22";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1c {
+						pins = "gpio8";
+						function = "fct3";
+					};
+					uart1d {
+						pins = "gpio9";
+						function = "fct3";
+					};
+					uart1e {
+						pins = "gpio23";
+						function = "fct3";
+					};
+					uart1f {
+						pins = "gpio24";
+						function = "fct3";
+					};
+					uart1g {
+						pins = "gpio25";
+						function = "fct3";
+					};
+					uart1h {
+						pins = "gpio26";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2: uart2 {
+					uart2a {
+						pins = "gpio6";
+						function = "fct3";
+					};
+					uart2b {
+						pins = "gpio7";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2_modem: uart2_modem {
+					uart2c {
+						pins = "gpio0";
+						function = "fct3";
+					};
+					uart2d {
+						pins = "gpio1";
+						function = "fct3";
+					};
+					uart2e {
+						pins = "gpio2";
+						function = "fct3";
+					};
+					uart2f {
+						pins = "gpio3";
+						function = "fct3";
+					};
+					uart2g {
+						pins = "gpio4";
+						function = "fct3";
+					};
+					uart2h {
+						pins = "gpio5";
+						function = "fct3";
+					};
+				};
+			};
+
+			gpio0: gpio@000000 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				plxtech,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <3>;
+				plxtech,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 3>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <23>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 17>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x300000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <24>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 18>;
+			};
+
+			uart2: serial@900000 {
+			       compatible = "ns16550a";
+			       reg = <0x900000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <29>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 22>;
+			};
+
+			uart3: serial@a00000 {
+			       compatible = "ns16550a";
+			       reg = <0xa00000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <30>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset 23>;
+			};
+		};
+
+		apb-bridge@45000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x45000000 0x1000000>;
+
+			sys: sys-ctrl@000000 {
+				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0x000000 0x100000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+
+			rps@300000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x300000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xFFFFFFFF>;
+					clear-mask = <0>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox810se-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&rpsclk>;
+					interrupts = <4 5>;
+				};
+			};
+		};
+	};
+};
-- 
1.9.1

[PATCH v3 16/18] dt-bindings: Add OXNAS bindings

[Neil Armstrong]

Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/oxnas.txt | 9 +++++++++
 1 file changed, 9 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/oxnas.txt

diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt
new file mode 100644
index 0000000..f3567c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/oxnas.txt
@@ -0,0 +1,9 @@
+PLX Technology OXNAS SoCs Family device tree bindings
+-------------------------------------------
+
+Boards with the OX810SE SoC shall have the following properties:
+  Required root node property:
+    compatible: "oxsemi,ox810se"
+
+Board compatible values:
+  - "wd,mbwe" (OX810SE)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 17/18] dt-bindings: Add Western Digital to vendor prefixes

[Neil Armstrong]

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 57c04e4..2585b09 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -259,6 +259,7 @@ via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 vivante	Vivante Corporation
 voipac	Voipac Technologies s.r.o.
+wd	Western Digital Corp.
 wexler	Wexler
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 18/18] arm: boot: dts: Add Western Digital My Book World Edition device tree

[Neil Armstrong]

Add Western Digital My Book World Edition device tree based on
PLX Technology OX810SE SoC.

Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 arch/arm/boot/dts/Makefile    |   2 +
 arch/arm/boot/dts/wd-mbwe.dts | 112 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 114 insertions(+)
 create mode 100644 arch/arm/boot/dts/wd-mbwe.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 52b34a0..3290d4e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -530,6 +530,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += \
+	wd-mbwe.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
diff --git a/arch/arm/boot/dts/wd-mbwe.dts b/arch/arm/boot/dts/wd-mbwe.dts
new file mode 100644
index 0000000..ac3250a
--- /dev/null
+++ b/arch/arm/boot/dts/wd-mbwe.dts
@@ -0,0 +1,112 @@
+/*
+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+#include "ox810se.dtsi"
+
+/ {
+	model = "Western Digital My Book World Edition";
+
+	compatible = "wd,mbwe", "oxsemi,ox810se";
+
+	chosen {
+		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x48000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power {
+			label = "power";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+
+		recovery {
+			label = "recovery";
+			gpios = <&gpio0 4 1>;
+			linux,code = <0xab>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		a0 {
+			label = "activity0";
+			gpios = <&gpio0 25 0>;
+			default-state = "keep";
+		};
+
+		a1 {
+			label = "activity1";
+			gpios = <&gpio0 26 0>;
+			default-state = "keep";
+		};
+
+		a2 {
+			label = "activity2";
+			gpios = <&gpio0 5 0>;
+			default-state = "keep";
+		};
+
+		a3 {
+			label = "activity3";
+			gpios = <&gpio0 6 0>;
+			default-state = "keep";
+		};
+
+		a4 {
+			label = "activity4";
+			gpios = <&gpio0 7 0>;
+			default-state = "keep";
+		};
+
+		a5 {
+			label = "activity5";
+			gpios = <&gpio1 2 0>;
+			default-state = "keep";
+		};
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+		gpios = <&gpio0 3 0 /* sda */
+			 &gpio0 2 0 /* scl */
+			 >;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc0: rtc@48 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 02/18] dt-bindings: timer: sp804: add new compatible for OX810SE SoC

[Rob Herring]

On Thu, Mar 24, 2016 at 05:49:59PM +0100, Neil Armstrong wrote:
> Add new oxsemi,ox810se-rps-timer compatible string to support the
> PLX Technology OX810SE SoC Dual Timers variant.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/timer/arm,sp804.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 04/18] dt-bindings: irq: arm,versatile-fpga: add compatible string for OX810SE SoC

[Rob Herring]

On Thu, Mar 24, 2016 at 05:50:01PM +0100, Neil Armstrong wrote:
> Under the OX810SE, this same controller is used as "Reference Peripheral
> Specification" Interrupt Controller, so add new compatible string to support
> the PLX Technology OX810SE SoC Interrupt Controller.
> 
> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  .../devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Rob Herring]

On Thu, Mar 24, 2016 at 05:50:09PM +0100, Neil Armstrong wrote:
> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/gpio/gpio_oxnas.txt        | 47 ++++++++++++++++++
>  .../bindings/pinctrl/plxtech,pinctrl.txt           | 57 ++++++++++++++++++++++
>  2 files changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/plxtech,pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
> new file mode 100644
> index 0000000..4530fa9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
> @@ -0,0 +1,47 @@
> +* PLX Technology OXNAS SoC GPIO Controller
> +
> +Required properties:
> + - compatible: "oxsemi,ox810se-gpio"
> + - reg: Base address and length for the device.
> + - interrupts: The port interrupt shared by all pins.
> + - gpio-controller: Marks the port as GPIO controller.
> + - #gpio-cells: Two. The first cell is the pin number and
> +   the second cell is used to specify the gpio polarity as defined in
> +   defined in <dt-bindings/gpio/gpio.h>:
> +      0 = GPIO_ACTIVE_HIGH
> +      1 = GPIO_ACTIVE_LOW
> + - interrupt-controller: Marks the device node as an interrupt controller.
> + - #interrupt-cells: Two. The first cell is the GPIO number and second cell
> +   is used to specify the trigger type as defined in
> +   <dt-bindings/interrupt-controller/irq.h>:
> +      IRQ_TYPE_EDGE_RISING
> +      IRQ_TYPE_EDGE_FALLING
> +      IRQ_TYPE_EDGE_BOTH
> + - plxtech,gpio-bank: Specifies which bank a controller owns.

How is this used?

> + - gpio-ranges: Interaction with the PINCTRL subsystem.
> + - ngpios: Specifies the gpio lines count in this specific bank.
> +
> +Example:
> +
> +gpio0: gpio@0 {
> +	compatible = "oxsemi,ox810se-gpio";
> +	reg = <0x000000 0x100000>;
> +	interrupts = <21>;
> +	#gpio-cells = <2>;
> +	gpio-controller;
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +	plxtech,gpio-bank = <0>;
> +	gpio-ranges = <&pinctrl 0 0 32>;
> +	ngpios = <32>;

Is 32 the max? It should not be needed then.

> +};
> +
> +keys {
> +	...
> +
> +	button@sw1 {

sw1 is not a unit-address. Just do "sw1-button".

> +		label = "ESC";
> +		linux,code = <1>;
> +		gpios = <&gpio0 12 0>;
> +	};
> +};

Re: [PATCH v3 16/18] dt-bindings: Add OXNAS bindings

[Rob Herring]

On Thu, Mar 24, 2016 at 05:50:13PM +0100, Neil Armstrong wrote:
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/oxnas.txt | 9 +++++++++
>  1 file changed, 9 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/oxnas.txt

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 08/18] dt-bindings: Add PLX Technology Reset Controller bindings

[Philipp Zabel]

Am Donnerstag, den 24.03.2016, 17:50 +0100 schrieb Neil Armstrong:
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../devicetree/bindings/reset/plxtech,reset.txt    | 58 ++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/plxtech,reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/plxtech,reset.txt b/Documentation/devicetree/bindings/reset/plxtech,reset.txt
> new file mode 100644
> index 0000000..581c974
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/plxtech,reset.txt
> @@ -0,0 +1,58 @@
> +PLX Technology OXNAS SoC Family RESET Controller
> +================================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: Should be "oxsemi,ox810se-reset"
> +- #reset-cells: 1, see below
> +
> +Parent node should have the following properties :
> +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"

So oxsemi developed oxnas, got bought up by plxtech, which was bought by
avago, which then acquired broadcom and adopted its name?

If there's agreement bout the oxsemi vendor prefix, I'd rename
plxtech,reset.txt to oxsemi,reset.txt and replace all occurrences of PLX
Technology with Oxford Semiconductor.

With this cleared up, I'll be happy to take this and patch 7.

best regards
Philipp

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Linus Walleij]

On Thu, Mar 24, 2016 at 5:50 PM, Neil Armstrong <narmstrong@baylibre.com> wrote:

> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
(...)
> + - plxtech,gpio-bank: Specifies which bank a controller owns.

Rob commented on this too.

Other drivers just use "gpio-bank" for this, so use that.

I should add it to the generic bindings document.

Yours,
Linus Walleij

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Linus Walleij]

On Fri, Mar 25, 2016 at 3:48 PM, Rob Herring <robh@kernel.org> wrote:
> On Thu, Mar 24, 2016 at 05:50:09PM +0100, Neil Armstrong wrote:
>> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
>> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

>> + - plxtech,gpio-bank: Specifies which bank a controller owns.
>
> How is this used?

That is used to give a unique ID number to the bank.

Hardware often need this to cross-reference pin controllers
to GPIO banks.

I should add it as "gpio-bank" to the generic bindings
instead, several platforms already use this and there is
no point in having a vendor prefix in front of it.

Yours,
Linus Walleij

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Rob Herring]

On Thu, Mar 31, 2016 at 3:58 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Fri, Mar 25, 2016 at 3:48 PM, Rob Herring <robh@kernel.org> wrote:
>> On Thu, Mar 24, 2016 at 05:50:09PM +0100, Neil Armstrong wrote:
>>> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
>>> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
>>> + - plxtech,gpio-bank: Specifies which bank a controller owns.
>>
>> How is this used?
>
> That is used to give a unique ID number to the bank.
>
> Hardware often need this to cross-reference pin controllers
> to GPIO banks.
>
> I should add it as "gpio-bank" to the generic bindings
> instead, several platforms already use this and there is
> no point in having a vendor prefix in front of it.

Okay, now it is clearer. I don't want this documented as a common
property because I don't want to encourage it's use. I only see 2
users currently: ST and PIC32.

Looking at one example, it appears to be redundant already.
nomadik-gpio-chips property already gives you the index. The index of
the phandles is the bank numbering. PIC32 could do the same.

Rob

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Neil Armstrong]

On 03/31/2016 03:36 PM, Rob Herring wrote:
> On Thu, Mar 31, 2016 at 3:58 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
>> On Fri, Mar 25, 2016 at 3:48 PM, Rob Herring <robh@kernel.org> wrote:
>>> On Thu, Mar 24, 2016 at 05:50:09PM +0100, Neil Armstrong wrote:
>>>> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
>>>> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
>>>>
>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>
>>>> + - plxtech,gpio-bank: Specifies which bank a controller owns.
>>>
>>> How is this used?
>>
>> That is used to give a unique ID number to the bank.
>>
>> Hardware often need this to cross-reference pin controllers
>> to GPIO banks.
>>
>> I should add it as "gpio-bank" to the generic bindings
>> instead, several platforms already use this and there is
>> no point in having a vendor prefix in front of it.
> 
> Okay, now it is clearer. I don't want this documented as a common
> property because I don't want to encourage it's use. I only see 2
> users currently: ST and PIC32.
> 
> Looking at one example, it appears to be redundant already.
> nomadik-gpio-chips property already gives you the index. The index of
> the phandles is the bank numbering. PIC32 could do the same.
> 
> Rob
> 

Hi,

What should I use ?
I need to repost in a separate patchset with vendor replaced by Oxford Semiconductor.
Should I get rid of the vendor prefix of gpio-bank ?

Neil

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Rob Herring]

On Fri, Apr 1, 2016 at 9:30 AM, Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 03/31/2016 03:36 PM, Rob Herring wrote:
>> On Thu, Mar 31, 2016 at 3:58 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
>>> On Fri, Mar 25, 2016 at 3:48 PM, Rob Herring <robh@kernel.org> wrote:
>>>> On Thu, Mar 24, 2016 at 05:50:09PM +0100, Neil Armstrong wrote:
>>>>> Add pinctrl and gpio DT bindings for PLX Technology OXNAS SoC Family.
>>>>> This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins.
>>>>>
>>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>>
>>>>> + - plxtech,gpio-bank: Specifies which bank a controller owns.
>>>>
>>>> How is this used?
>>>
>>> That is used to give a unique ID number to the bank.
>>>
>>> Hardware often need this to cross-reference pin controllers
>>> to GPIO banks.
>>>
>>> I should add it as "gpio-bank" to the generic bindings
>>> instead, several platforms already use this and there is
>>> no point in having a vendor prefix in front of it.
>>
>> Okay, now it is clearer. I don't want this documented as a common
>> property because I don't want to encourage it's use. I only see 2
>> users currently: ST and PIC32.
>>
>> Looking at one example, it appears to be redundant already.
>> nomadik-gpio-chips property already gives you the index. The index of
>> the phandles is the bank numbering. PIC32 could do the same.
>>
>> Rob
>>
>
> Hi,
>
> What should I use ?

Maybe gpio-ranges as you asked. Not really sure as I haven't used it.

> I need to repost in a separate patchset with vendor replaced by Oxford Semiconductor.
> Should I get rid of the vendor prefix of gpio-bank ?

No, because I think you should get rid of the property.

Rob

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Neil Armstrong]

On 04/01/2016 05:19 PM, Rob Herring wrote:
> On Fri, Apr 1, 2016 at 9:30 AM, Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>
>>> Rob
>>>
>>
>> Hi,
>>
>> What should I use ?
> 
> Maybe gpio-ranges as you asked. Not really sure as I haven't used it.

If I use gpio-ranges I can get rid of gpio-bank and ngpios properties.

> 
>> I need to repost in a separate patchset with vendor replaced by Oxford Semiconductor.
>> Should I get rid of the vendor prefix of gpio-bank ?
> 
> No, because I think you should get rid of the property.
> 
> Rob
> 

If gpio-ranges is OK, I can post it ASAP.

Thanks,

Neil

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Linus Walleij]

On Thu, Mar 31, 2016 at 3:36 PM, Rob Herring <robh@kernel.org> wrote:

> Looking at one example, it appears to be redundant already.
> nomadik-gpio-chips property already gives you the index. The index of
> the phandles is the bank numbering. PIC32 could do the same.

nomadik-gpio-chips is a property on the pin controller,
so it goes the wrong direction I think, the pin controller
knows these indexes but the GPIO chip does not know
what index it has.

Yours,
Linus Walleij

Re: [PATCH v3 12/18] dt-bindings: Add PLX Technology OXNAS pinctrl and gpio bindings

[Linus Walleij]

On Fri, Apr 1, 2016 at 5:48 PM, Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 04/01/2016 05:19 PM, Rob Herring wrote:
>> On Fri, Apr 1, 2016 at 9:30 AM, Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>> What should I use ?
>>
>> Maybe gpio-ranges as you asked. Not really sure as I haven't used it.
>
> If I use gpio-ranges I can get rid of gpio-bank and ngpios properties.

I'm not super-happy about that but I see that it can be used
this way... hm.

Yours,
Linus Walleij