From: David Lechner <david@lechnology.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:USB SUBSYSTEM" <linux-usb@vger.kernel.org>,
Russell King <linux@arm.linux.org.uk>,
David Lechner <david@lechnology.com>,
Pawel Moll <pawel.moll@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kevin Hilman <khilman@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
open list <linux-kernel@vger.kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
petr@barix.com, Rob Herring <robh+dt@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
Kumar Gala <galak@codeaurora.org>,
David.Laight@ACULAB.COM, Lee Jones <lee.jones@linaro.org>,
sergei.shtylyov@cogentembedded.com, Bin Liu <b-liu@ti.com>
Subject: [PATCH v3 04/16] ARM: davinci: Move clock init after ioremap.
Date: Thu, 24 Mar 2016 18:51:29 -0500 [thread overview]
Message-ID: <1458863503-31121-5-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1458863503-31121-1-git-send-email-david@lechnology.com>
Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem.
The davinci_common_init() function must be called before the ioremap, so
the clock init is now split out as separate function.
Signed-off-by: David Lechner <david@lechnology.com>
---
v3 changes: This is a new patch. It takes care of the issue of unwanted ioremap
in clock set_parent functions.
arch/arm/mach-davinci/clock.c | 4 ++--
arch/arm/mach-davinci/clock.h | 7 ++++++-
arch/arm/mach-davinci/common.c | 6 ------
arch/arm/mach-davinci/da830.c | 2 ++
arch/arm/mach-davinci/da850.c | 2 ++
arch/arm/mach-davinci/dm355.c | 1 +
arch/arm/mach-davinci/dm365.c | 1 +
arch/arm/mach-davinci/dm644x.c | 1 +
arch/arm/mach-davinci/dm646x.c | 1 +
9 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 3424eac6..a5c2629 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -560,7 +560,7 @@ EXPORT_SYMBOL(davinci_set_pllrate);
* than that used by default in <soc>.c file. The reference clock rate
* should be updated early in the boot process; ideally soon after the
* clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
+ * rate (davinci_clk_init()).
*
* Returns 0 on success, error otherwise.
*/
@@ -581,7 +581,7 @@ int davinci_set_refclk_rate(unsigned long rate)
return 0;
}
-int __init davinci_clk_init(struct clk_lookup *clocks)
+int __init _davinci_clk_init(struct clk_lookup *clocks)
{
struct clk_lookup *c;
struct clk *clk;
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 1e4e836..8b0fbbe 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -124,7 +124,12 @@ struct clk {
.clk = ck, \
} \
-int davinci_clk_init(struct clk_lookup *clocks);
+int _davinci_clk_init(struct clk_lookup *clocks);
+static inline void davinci_clk_init(struct davinci_soc_info *soc_info)
+{
+ if (soc_info->cpu_clks && _davinci_clk_init(soc_info->cpu_clks))
+ panic("davinci_clk_init: Failed to init clocks.\n");
+}
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv);
int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index f55ef2e..6bc8c22 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -103,12 +103,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
if (ret < 0)
goto err;
- if (davinci_soc_info.cpu_clks) {
- ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
- if (ret != 0)
- goto err;
- }
return;
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 7187e7f..79d5fc3 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1214,4 +1214,6 @@ void __init da830_init(void)
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+
+ davinci_clk_init(&davinci_soc_info_da830);
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 97d8779..9f46706 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1346,4 +1346,6 @@ void __init da850_init(void)
v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+ davinci_clk_init(&davinci_soc_info_da850);
}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a0ecf49..b311b84 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1052,6 +1052,7 @@ void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
davinci_map_sysmod();
+ davinci_clk_init(&davinci_soc_info_dm355);
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 384d367..2338875 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1176,6 +1176,7 @@ void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
davinci_map_sysmod();
+ davinci_clk_init(&davinci_soc_info_dm365);
}
static struct resource dm365_vpss_resources[] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index b4b3a8b..5e672ed 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -932,6 +932,7 @@ void __init dm644x_init(void)
{
davinci_common_init(&davinci_soc_info_dm644x);
davinci_map_sysmod();
+ davinci_clk_init(&davinci_soc_info_dm644x);
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index a43db0f..2840263 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -956,6 +956,7 @@ void __init dm646x_init(void)
{
davinci_common_init(&davinci_soc_info_dm646x);
davinci_map_sysmod();
+ davinci_clk_init(&davinci_soc_info_dm646x);
}
static int __init dm646x_init_devices(void)
--
1.9.1
next prev parent reply other threads:[~2016-03-24 23:51 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-24 23:51 [PATCH v3 00/16] da8xx USB clocks David Lechner
2016-03-24 23:51 ` [PATCH v3 01/16] dt: davinci: use proper address after @ David Lechner
[not found] ` <1458863503-31121-2-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-03-25 13:29 ` Sergei Shtylyov
2016-03-25 15:13 ` Rob Herring
[not found] ` <CAL_JsqKdVsJaWhKt6tSJNd+oev5qC+7_u=CFCgO980NZk-tdOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-03-25 16:36 ` Sergei Shtylyov
2016-03-25 15:14 ` Rob Herring
2016-04-11 8:19 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 02/16] mfd: da8xx-cfgchip: New header file for CFGCHIP registers David Lechner
[not found] ` <1458863503-31121-3-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-03-25 17:22 ` Sergei Shtylyov
[not found] ` <56F573F3.90500-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-03-28 15:02 ` David Lechner
2016-03-28 16:42 ` Sergei Shtylyov
[not found] ` <56F95EE6.1010403-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2016-04-11 8:23 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 03/16] ARM: davinici: da8xx: move usb code to new file David Lechner
[not found] ` <1458863503-31121-4-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-04-11 8:55 ` Sekhar Nori
2016-03-24 23:51 ` David Lechner [this message]
2016-04-11 9:14 ` [PATCH v3 04/16] ARM: davinci: Move clock init after ioremap Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 07/16] ARM: davinci: da8xx: add usb phy clocks David Lechner
2016-03-24 23:51 ` [PATCH v3 08/16] dt-bindings: Add bindings for phy-da8xx-usb David Lechner
2016-03-25 15:04 ` Rob Herring
2016-03-24 23:51 ` [PATCH v3 09/16] phy: da8xx-usb: new driver for DA8xx SoC USB PHY David Lechner
2016-03-25 1:57 ` [PATCH] " David Lechner
2016-03-26 14:10 ` Sergei Shtylyov
2016-04-13 13:20 ` [PATCH v3 09/16] " Kishon Vijay Abraham I
2016-04-13 20:07 ` David Lechner
2016-04-14 12:38 ` Kishon Vijay Abraham I
2016-03-24 23:51 ` [PATCH v3 11/16] ARM: davinci: da8xx: Add USB PHY platform declaration David Lechner
[not found] ` <1458863503-31121-1-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-03-24 23:51 ` [PATCH v3 05/16] ARM: davinci: add set_parent callback for mux clocks David Lechner
2016-04-11 10:40 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 06/16] ARM: davinci: da850: use clk->set_parent for async3 David Lechner
[not found] ` <1458863503-31121-7-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-04-11 10:49 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 10/16] ARM: davinci: da8xx: Add CFGCHIPn syscon platform declaration David Lechner
2016-03-24 23:51 ` [PATCH v3 12/16] ARM: dt: da850: Add cfgchip syscon node David Lechner
2016-03-24 23:51 ` [PATCH v3 13/16] ARM: dt: da850: Add usb phy node David Lechner
2016-03-24 23:51 ` [PATCH v3 16/16] usb: musb: da8xx: Remove mach code David Lechner
2016-04-07 16:29 ` [PATCH v3 00/16] da8xx USB clocks David Lechner
[not found] ` <57068AF1.8050909-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-04-11 11:28 ` Sekhar Nori
2016-03-24 23:51 ` [PATCH v3 14/16] usb: ohci-da8xx: Remove code that references mach David Lechner
2016-03-24 23:51 ` [PATCH v3 15/16] usb: musb: da8xx: Use devm in probe David Lechner
2016-03-31 22:21 ` Bin Liu
2016-03-31 22:28 ` David Lechner
[not found] ` <56FDA4A0.6080106-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2016-04-01 14:56 ` Bin Liu
2016-04-01 10:36 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458863503-31121-5-git-send-email-david@lechnology.com \
--to=david@lechnology.com \
--cc=David.Laight@ACULAB.COM \
--cc=b-liu@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@kernel.org \
--cc=kishon@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=pawel.moll@arm.com \
--cc=petr@barix.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).