* [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver
[not found] ` <cover.1455872448.git.palminha-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
@ 2016-02-19 9:40 ` Carlos Palminha
0 siblings, 0 replies; 8+ messages in thread
From: Carlos Palminha @ 2016-02-19 9:40 UTC (permalink / raw)
To: Jose.Abreu-HKixBCOQz3hWk0Htik3J/w,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, perex-/Fr2/VpizcU, tiwai-IBi9RG/b67k,
CARLOS.PALMINHA-HKixBCOQz3hWk0Htik3J/w,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8
From: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
HDMI audio support was added to the AXS board using an
I2S cpu driver and a custom platform driver.
The platform driver supports two channels @ 16 bits with
rates 32k, 44.1k and 48k. ALSA Simple audio card is used to
glue the cpu, platform and codec driver (adv7511).
Signed-off-by: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
arch/arc/boot/dts/axs10x_mb.dtsi | 20 ++-
sound/soc/dwc/Kconfig | 1 +
sound/soc/dwc/Makefile | 4 +-
sound/soc/dwc/designware_i2s.c | 139 +++++++++++++++++++--
sound/soc/dwc/designware_pcm.c | 264 +++++++++++++++++++++++++++++++++++++++
sound/soc/dwc/designware_pcm.h | 21 ++++
6 files changed, 430 insertions(+), 19 deletions(-)
create mode 100644 sound/soc/dwc/designware_pcm.c
create mode 100644 sound/soc/dwc/designware_pcm.h
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index e00e5bb..c137376 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -130,12 +130,23 @@
interrupts = <14>;
};
- i2c@0x1e000 {
- compatible = "snps,designware-i2c";
+ i2s: i2s@0x1e000 {
+ compatible = "snps,designware-i2s";
reg = <0x1e000 0x100>;
- clock-frequency = <400000>;
- clocks = <&i2cclk>;
interrupts = <15>;
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AXS10X HDMI Audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&adv7511>;
+ };
};
i2c@0x1f000 {
@@ -155,6 +166,7 @@
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,clock-delay = <0x03>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
index d50e085..bc3fae7 100644
--- a/sound/soc/dwc/Kconfig
+++ b/sound/soc/dwc/Kconfig
@@ -2,6 +2,7 @@ config SND_DESIGNWARE_I2S
tristate "Synopsys I2S Device Driver"
depends on CLKDEV_LOOKUP
select SND_SOC_GENERIC_DMAENGINE_PCM
+ select SND_SIMPLE_CARD
help
Say Y or M if you want to add support for I2S driver for
Synopsys desigwnware I2S device. The device supports upto
diff --git a/sound/soc/dwc/Makefile b/sound/soc/dwc/Makefile
index 319371f..4d8f869 100644
--- a/sound/soc/dwc/Makefile
+++ b/sound/soc/dwc/Makefile
@@ -1,3 +1,3 @@
# SYNOPSYS Platform Support
-obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o
-
+obj-$(CONFIG_SND_DESIGNWARE_I2S) += dwc_i2s.o
+dwc_i2s-y := designware_i2s.o designware_pcm.o
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index bff258d..db9aced 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -25,6 +25,8 @@
#include <sound/soc.h>
#include <sound/dmaengine_pcm.h>
+#include "designware_pcm.h"
+
/* common register for all channel */
#define IER 0x000
#define IRER 0x004
@@ -84,6 +86,11 @@
#define MAX_CHANNEL_NUM 8
#define MIN_CHANNEL_NUM 2
+/* PLL registers addresses */
+#define PLL_IDIV_ADDR 0xE00100A0
+#define PLL_FBDIV_ADDR 0xE00100A4
+#define PLL_ODIV_ADDR 0xE00100A8
+
union dw_i2s_snd_dma_data {
struct i2s_dma_data pd;
struct snd_dmaengine_dai_dma_data dt;
@@ -100,12 +107,32 @@ struct dw_i2s_dev {
struct device *dev;
u32 ccr;
u32 xfer_resolution;
+ u32 xfer_bytes;
+ u32 fifo_th;
/* data related to DMA transfers b/w i2s and DMAC */
union dw_i2s_snd_dma_data play_dma_data;
union dw_i2s_snd_dma_data capture_dma_data;
struct i2s_clk_config_data config;
int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
+ int (*pcm_get)(u32 *lsample, u32 *rsample, int bytes, int buf_size);
+};
+
+struct dw_i2s_pll {
+ unsigned int rate;
+ unsigned int data_width;
+ unsigned int idiv;
+ unsigned int fbdiv;
+ unsigned int odiv;
+};
+
+static const struct dw_i2s_pll dw_i2s_pll_cfg[] = {
+ { 32000, 16, 0x104, 0x451, 0x10E38 }, /* 32 kHz */
+ { 32000, 32, 0x82, 0x451, 0x10E38 },
+ { 44100, 16, 0x104, 0x596, 0x10D35}, /* 44.1 kHz */
+ { 44100, 32, 0x82, 0x596, 0x10D35 },
+ { 48000, 16, 0x208, 0xA28, 0x10B2C }, /* 48 kHz */
+ { 48000, 32, 0x104, 0xA28, 0x10B2C },
};
static inline void i2s_write_reg(void __iomem *io_base, int reg, u32 val)
@@ -144,20 +171,72 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
}
}
+static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
+{
+ struct dw_i2s_dev *dev = dev_id;
+ u32 isr[4], sleft[dev->fifo_th], sright[dev->fifo_th];
+ int i, j;
+
+ for (i = 0; i < 4; i++)
+ isr[i] = i2s_read_reg(dev->i2s_base, ISR(i));
+
+ for (i = 0; i < 4; i++) {
+ /* Copy only to first two channels.
+ TODO: Remaining channels */
+ if ((isr[i] & 0x10) && (i == 0) && (dev->pcm_get)) {
+ /* TXFE - TX FIFO is empty */
+ dev->pcm_get(sleft, sright, dev->xfer_bytes,
+ dev->fifo_th);
+
+ for (j = 0; j < dev->fifo_th; j++) {
+ i2s_write_reg(dev->i2s_base, LRBR_LTHR(i),
+ sleft[j]);
+ i2s_write_reg(dev->i2s_base, RRBR_RTHR(i),
+ sright[j]);
+ }
+ }
+ }
+
+ i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK);
+ i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE);
+
+ return IRQ_HANDLED;
+}
+
+static int i2s_pll_cfg(struct i2s_clk_config_data *config)
+{
+ u32 rate = config->sample_rate;
+ u32 data_width = config->data_width;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dw_i2s_pll_cfg); i++) {
+ if ((dw_i2s_pll_cfg[i].rate == rate) &&
+ (dw_i2s_pll_cfg[i].data_width == data_width)) {
+ writel(dw_i2s_pll_cfg[i].idiv, (void *)PLL_IDIV_ADDR);
+ writel(dw_i2s_pll_cfg[i].fbdiv, (void *)PLL_FBDIV_ADDR);
+ writel(dw_i2s_pll_cfg[i].odiv, (void *)PLL_ODIV_ADDR);
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
static void i2s_start(struct dw_i2s_dev *dev,
struct snd_pcm_substream *substream)
{
+ struct i2s_clk_config_data *config = &dev->config;
u32 i, irq;
i2s_write_reg(dev->i2s_base, IER, 1);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < (config->chan_nr / 2); i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
}
i2s_write_reg(dev->i2s_base, ITER, 1);
} else {
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < (config->chan_nr / 2); i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
}
@@ -231,14 +310,16 @@ static void dw_i2s_config(struct dw_i2s_dev *dev, int stream)
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
i2s_write_reg(dev->i2s_base, TCR(ch_reg),
dev->xfer_resolution);
- i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+ i2s_write_reg(dev->i2s_base, TFCR(ch_reg),
+ dev->fifo_th - 1);
irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
} else {
i2s_write_reg(dev->i2s_base, RCR(ch_reg),
dev->xfer_resolution);
- i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+ i2s_write_reg(dev->i2s_base, RFCR(ch_reg),
+ dev->fifo_th - 1);
irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
@@ -259,22 +340,25 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
config->data_width = 16;
dev->ccr = 0x00;
dev->xfer_resolution = 0x02;
+ dev->xfer_bytes = 0x02;
break;
case SNDRV_PCM_FORMAT_S24_LE:
config->data_width = 24;
dev->ccr = 0x08;
dev->xfer_resolution = 0x04;
+ dev->xfer_bytes = 0x03;
break;
case SNDRV_PCM_FORMAT_S32_LE:
config->data_width = 32;
dev->ccr = 0x10;
dev->xfer_resolution = 0x05;
+ dev->xfer_bytes = 0x04;
break;
default:
- dev_err(dev->dev, "designware-i2s: unsuppted PCM fmt");
+ dev_err(dev->dev, "designware-i2s: unsupported PCM fmt");
return -EINVAL;
}
@@ -611,6 +695,7 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
dev->capture_dma_data.dt.maxburst = 16;
}
+ dev->fifo_th = fifo_depth / 2;
return 0;
}
@@ -620,7 +705,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
const struct i2s_platform_data *pdata = pdev->dev.platform_data;
struct dw_i2s_dev *dev;
struct resource *res;
- int ret;
+ int ret, irq_number;
struct snd_soc_dai_driver *dw_i2s_dai;
const char *clk_id;
@@ -643,6 +728,19 @@ static int dw_i2s_probe(struct platform_device *pdev)
if (IS_ERR(dev->i2s_base))
return PTR_ERR(dev->i2s_base);
+ irq_number = platform_get_irq(pdev, 0);
+ if (irq_number <= 0) {
+ dev_err(&pdev->dev, "get irq fail\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq_number, i2s_irq_handler,
+ IRQF_SHARED, "dw_i2s_irq_handler", dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request irq fail\n");
+ return ret;
+ }
+
dev->dev = &pdev->dev;
dev->i2s_reg_comp1 = I2S_COMP_PARAM_1;
@@ -671,14 +769,22 @@ static int dw_i2s_probe(struct platform_device *pdev)
return -ENODEV;
}
}
- dev->clk = devm_clk_get(&pdev->dev, clk_id);
- if (IS_ERR(dev->clk))
- return PTR_ERR(dev->clk);
+ if (dev->i2s_clk_cfg ||
+ of_get_property(pdev->dev.of_node, "clocks", NULL)) {
+ dev->clk = devm_clk_get(&pdev->dev, clk_id);
+
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
- ret = clk_prepare_enable(dev->clk);
- if (ret < 0)
- return ret;
+ ret = clk_prepare_enable(dev->clk);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Use internal PLL config */
+ dev->i2s_clk_cfg = i2s_pll_cfg;
+ dev->clk = NULL;
+ }
}
dev_set_drvdata(&pdev->dev, dev);
@@ -690,7 +796,14 @@ static int dw_i2s_probe(struct platform_device *pdev)
}
if (!pdata) {
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+ if (of_get_property(pdev->dev.of_node, "dmas", NULL)) {
+ /* Using DMA */
+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+ } else {
+ ret = dw_pcm_platform_register(pdev);
+ dev->pcm_get = dw_pcm_platform_get;
+ }
+
if (ret) {
dev_err(&pdev->dev,
"Could not register PCM: %d\n", ret);
diff --git a/sound/soc/dwc/designware_pcm.c b/sound/soc/dwc/designware_pcm.c
new file mode 100644
index 0000000..e1928b8
--- /dev/null
+++ b/sound/soc/dwc/designware_pcm.c
@@ -0,0 +1,264 @@
+/*
+ * ALSA Platform Synopsys Audio Layer
+ *
+ * sound/soc/dwc/designware_pcm.c
+ *
+ * Copyright (C) 2016 Synopsys
+ * Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>, Tiago Duarte
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+struct dw_pcm_binfo {
+ struct snd_pcm_substream *stream;
+ spinlock_t lock;
+ unsigned char *dma_base;
+ unsigned char *dma_pointer;
+ unsigned int period_size_frames;
+ unsigned int size;
+ snd_pcm_uframes_t period_pointer;
+ unsigned int total_periods;
+ unsigned int current_period;
+};
+
+static const struct snd_pcm_hardware dw_pcm_playback_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .rate_min = 32000,
+ .rate_max = 48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 1152000,
+ .period_bytes_min = 64000,
+ .period_bytes_max = 576000,
+ .periods_min = 8,
+ .periods_max = 18,
+};
+
+static struct dw_pcm_binfo *dw_pcm_bi;
+
+static int dw_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi;
+
+ snd_soc_set_runtime_hwparams(substream, &dw_pcm_playback_hw);
+ snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
+
+ bi = kzalloc(sizeof(*bi), GFP_KERNEL);
+ if (!bi)
+ return -ENOMEM;
+
+ dw_pcm_bi = bi;
+ spin_lock_init(&bi->lock);
+
+ rt->hw.rate_min = 32000;
+ rt->hw.rate_max = 48000;
+
+ spin_lock(&bi->lock);
+ bi->stream = substream;
+ rt->private_data = bi;
+ spin_unlock(&bi->lock);
+
+ return 0;
+}
+
+static int dw_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+
+ kfree(bi);
+ dw_pcm_bi = NULL;
+ return 0;
+}
+
+static int dw_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+ int ret;
+
+ ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
+ if (ret < 0)
+ return ret;
+
+ memset(rt->dma_area, 0, params_buffer_bytes(hw_params));
+
+ spin_lock(&bi->lock);
+ bi->dma_base = rt->dma_area;
+ bi->dma_pointer = bi->dma_base;
+ spin_unlock(&bi->lock);
+
+ return 0;
+}
+
+static int dw_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ int ret;
+
+ ret = snd_pcm_lib_free_vmalloc_buffer(substream);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int dw_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+ u32 buffer_size_frames = 0;
+
+ spin_lock(&bi->lock);
+ bi->period_size_frames = bytes_to_frames(rt,
+ snd_pcm_lib_period_bytes(substream));
+ bi->size = snd_pcm_lib_buffer_bytes(substream);
+ buffer_size_frames = bytes_to_frames(rt, bi->size);
+ bi->total_periods = buffer_size_frames / bi->period_size_frames;
+ bi->current_period = 1;
+ spin_unlock(&bi->lock);
+
+ if ((buffer_size_frames % bi->period_size_frames) != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int dw_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t dw_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+
+ return bi->period_pointer;
+}
+
+static struct snd_pcm_ops dw_pcm_capture_ops = {
+ .open = dw_pcm_open,
+ .close = dw_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dw_pcm_hw_params,
+ .hw_free = dw_pcm_hw_free,
+ .prepare = dw_pcm_prepare,
+ .trigger = dw_pcm_trigger,
+ .pointer = dw_pcm_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static int dw_pcm_new(struct snd_soc_pcm_runtime *runtime)
+{
+ struct snd_pcm *pcm = runtime->pcm;
+ int ret;
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_DEV,
+ snd_dma_continuous_data(GFP_KERNEL),
+ dw_pcm_playback_hw.buffer_bytes_max,
+ dw_pcm_playback_hw.buffer_bytes_max);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void dw_pcm_free(struct snd_pcm *pcm)
+{
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static struct snd_soc_platform_driver dw_pcm_soc_platform = {
+ .pcm_new = dw_pcm_new,
+ .pcm_free = dw_pcm_free,
+ .ops = &dw_pcm_capture_ops,
+};
+
+int dw_pcm_platform_get(u32 *lsample, u32 *rsample, int bytes, int buf_size)
+{
+ struct snd_pcm_runtime *rt = NULL;
+ struct dw_pcm_binfo *bi = dw_pcm_bi;
+ int i;
+
+ if (!bi)
+ return -1;
+
+ rt = bi->stream->runtime;
+
+ spin_lock(&bi->lock);
+ for (i = 0; i < buf_size; i++) {
+ memcpy(&lsample[i], bi->dma_pointer, bytes);
+ memset(bi->dma_pointer, 0, bytes);
+ bi->dma_pointer += bytes;
+
+ memcpy(&rsample[i], bi->dma_pointer, bytes);
+ memset(bi->dma_pointer, 0, bytes);
+ bi->dma_pointer += bytes;
+ }
+ bi->period_pointer += bytes_to_frames(rt, bytes * 2 * buf_size);
+
+ if (bi->period_pointer >=
+ (bi->period_size_frames * bi->current_period)) {
+ bi->current_period++;
+ if (bi->current_period > bi->total_periods) {
+ bi->dma_pointer = bi->dma_base;
+ bi->period_pointer = 0;
+ bi->current_period = 1;
+ }
+
+ spin_unlock(&bi->lock);
+ snd_pcm_period_elapsed(bi->stream);
+ spin_lock(&bi->lock);
+ }
+
+ spin_unlock(&bi->lock);
+ return 0;
+}
+
+int dw_pcm_platform_register(struct platform_device *pdev)
+{
+ return snd_soc_register_platform(&pdev->dev, &dw_pcm_soc_platform);
+}
+
+int dw_pcm_platform_unregister(struct platform_device *pdev)
+{
+ snd_soc_unregister_platform(&pdev->dev);
+ return 0;
+}
+
+MODULE_AUTHOR("Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>, Tiago Duarte");
+MODULE_DESCRIPTION("Synopsys PCM module");
+MODULE_LICENSE("GPL");
\ No newline at end of file
diff --git a/sound/soc/dwc/designware_pcm.h b/sound/soc/dwc/designware_pcm.h
new file mode 100644
index 0000000..20bf65b
--- /dev/null
+++ b/sound/soc/dwc/designware_pcm.h
@@ -0,0 +1,21 @@
+/*
+ * ALSA Platform Synopsys Audio Layer
+ *
+ * sound/soc/dwc/designware_pcm.h
+ *
+ * Copyright (C) 2016 Synopsys
+ * Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>, Tiago Duarte
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __DW_PCM_H
+#define __DW_PCM_H
+
+int dw_pcm_platform_get(u32 *lsample, u32 *rsample, int bytes, int buf_size);
+int dw_pcm_platform_register(struct platform_device *pdev);
+int dw_pcm_platform_unregister(struct platform_device *pdev);
+
+#endif /* __DW_PCM_H */
\ No newline at end of file
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 0/4] Add I2S/ADV7511 audio support for ARC AXS10x boards
@ 2016-03-28 9:41 Jose Abreu
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Jose Abreu @ 2016-03-28 9:41 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w,
broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU,
tiwai-l3A5Bk7waGM, grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
mjonker-HKixBCOQz3hWk0Htik3J/w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, Jose Abreu
ARC AXS10x platforms consist of a mainboard with several peripherals.
One of those peripherals is an HDMI output port controlled by ADV7511 transmitter.
This patch set adds audio for the ADV7511 transmitter and I2S audio for the
AXS10x platform.
Jose Abreu (4):
drm/i2c/adv7511: Add audio support
ARC: axs10x: Update defconfigs so that audio is enabled
ASoC: dwc: Add I2S HDMI audio support using custom platform driver
ARC: axs10x: Update defconfigs so that I2S is enabled
arch/arc/boot/dts/axs10x_mb.dtsi | 20 +-
arch/arc/configs/axs101_defconfig | 4 +
arch/arc/configs/axs103_defconfig | 6 +
arch/arc/configs/axs103_smp_defconfig | 6 +
drivers/gpu/drm/i2c/Kconfig | 8 +
drivers/gpu/drm/i2c/Makefile | 2 +
drivers/gpu/drm/i2c/adv7511.c | 1024 ---------------------------------
drivers/gpu/drm/i2c/adv7511.h | 41 ++
drivers/gpu/drm/i2c/adv7511_audio.c | 310 ++++++++++
drivers/gpu/drm/i2c/adv7511_core.c | 1005 ++++++++++++++++++++++++++++++++
include/sound/soc-dai.h | 1 +
sound/soc/dwc/Kconfig | 1 +
sound/soc/dwc/designware_i2s.c | 384 ++++++++++++-
13 files changed, 1771 insertions(+), 1041 deletions(-)
delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] drm/i2c/adv7511: Add audio support
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
@ 2016-03-28 9:41 ` Jose Abreu
2016-03-28 9:41 ` [PATCH 2/4] ARC: axs10x: Update defconfigs so that audio is enabled Jose Abreu
` (2 subsequent siblings)
3 siblings, 0 replies; 8+ messages in thread
From: Jose Abreu @ 2016-03-28 9:41 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w,
broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU,
tiwai-l3A5Bk7waGM, grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
mjonker-HKixBCOQz3hWk0Htik3J/w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, Jose Abreu
This patch adds audio support for the ADV7511 HDMI transmitter
using ALSA SOC.
The code was ported from Analog Devices linux tree from
commit 1770c4a1e32b ("Merge remote-tracking branch
'xilinx/master' into xcomm_zynq"), which is available at:
- https://github.com/analogdevicesinc/linux/
The main core file was renamed from adv7511.c to adv7511_core.c
so that audio and video compile into a single adv7511.ko module
and to keep up with Analog Devices kernel tree.
The audio can be disabled using menu-config so it is possible
to use only video mode.
The HDMI mode is automatically started at boot and the audio
(when enabled) registers as a codec into ALSA.
SPDIF DAI format was also added to ASoC as it is required by
adv7511 audio.
Signed-off-by: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
drivers/gpu/drm/i2c/Kconfig | 8 +
drivers/gpu/drm/i2c/Makefile | 2 +
drivers/gpu/drm/i2c/adv7511.c | 1024 -----------------------------------
drivers/gpu/drm/i2c/adv7511.h | 41 ++
drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++
drivers/gpu/drm/i2c/adv7511_core.c | 1005 ++++++++++++++++++++++++++++++++++
include/sound/soc-dai.h | 1 +
7 files changed, 1367 insertions(+), 1024 deletions(-)
delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 22c7ed6..2cb6c0d 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -7,6 +7,14 @@ config DRM_I2C_ADV7511
help
Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+config DRM_I2C_ADV7511_AUDIO
+ bool "ADV7511 audio"
+ depends on DRM_I2C_ADV7511 && SND_SOC
+ default y
+ help
+ This adds support for audio on the ADV7511(W) and ADV7513 HDMI
+ encoders.
+
config DRM_I2C_CH7006
tristate "Chrontel ch7006 TV encoder"
default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 2c72eb5..513f683 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,6 +1,8 @@
ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+adv7511-y := adv7511_core.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
ch7006-y := ch7006_drv.o ch7006_mode.o
obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
deleted file mode 100644
index a02112b..0000000
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ /dev/null
@@ -1,1024 +0,0 @@
-/*
- * Analog Devices ADV7511 HDMI transmitter driver
- *
- * Copyright 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#include <linux/device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_edid.h>
-#include <drm/drm_encoder_slave.h>
-
-#include "adv7511.h"
-
-struct adv7511 {
- struct i2c_client *i2c_main;
- struct i2c_client *i2c_edid;
-
- struct regmap *regmap;
- struct regmap *packet_memory_regmap;
- enum drm_connector_status status;
- bool powered;
-
- unsigned int f_tmds;
-
- unsigned int current_edid_segment;
- uint8_t edid_buf[256];
- bool edid_read;
-
- wait_queue_head_t wq;
- struct drm_encoder *encoder;
-
- bool embedded_sync;
- enum adv7511_sync_polarity vsync_polarity;
- enum adv7511_sync_polarity hsync_polarity;
- bool rgb;
-
- struct edid *edid;
-
- struct gpio_desc *gpio_pd;
-};
-
-static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
-{
- return to_encoder_slave(encoder)->slave_priv;
-}
-
-/* ADI recommended values for proper operation. */
-static const struct reg_sequence adv7511_fixed_registers[] = {
- { 0x98, 0x03 },
- { 0x9a, 0xe0 },
- { 0x9c, 0x30 },
- { 0x9d, 0x61 },
- { 0xa2, 0xa4 },
- { 0xa3, 0xa4 },
- { 0xe0, 0xd0 },
- { 0xf9, 0x00 },
- { 0x55, 0x02 },
-};
-
-/* -----------------------------------------------------------------------------
- * Register access
- */
-
-static const uint8_t adv7511_register_defaults[] = {
- 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
- 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
- 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
- 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
- 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
- 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
- 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
- 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
- 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
- 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
- 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
- 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
- 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
- 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
- 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
- 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
-static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
-{
- switch (reg) {
- case ADV7511_REG_CHIP_REVISION:
- case ADV7511_REG_SPDIF_FREQ:
- case ADV7511_REG_CTS_AUTOMATIC1:
- case ADV7511_REG_CTS_AUTOMATIC2:
- case ADV7511_REG_VIC_DETECTED:
- case ADV7511_REG_VIC_SEND:
- case ADV7511_REG_AUX_VIC_DETECTED:
- case ADV7511_REG_STATUS:
- case ADV7511_REG_GC(1):
- case ADV7511_REG_INT(0):
- case ADV7511_REG_INT(1):
- case ADV7511_REG_PLL_STATUS:
- case ADV7511_REG_AN(0):
- case ADV7511_REG_AN(1):
- case ADV7511_REG_AN(2):
- case ADV7511_REG_AN(3):
- case ADV7511_REG_AN(4):
- case ADV7511_REG_AN(5):
- case ADV7511_REG_AN(6):
- case ADV7511_REG_AN(7):
- case ADV7511_REG_HDCP_STATUS:
- case ADV7511_REG_BCAPS:
- case ADV7511_REG_BKSV(0):
- case ADV7511_REG_BKSV(1):
- case ADV7511_REG_BKSV(2):
- case ADV7511_REG_BKSV(3):
- case ADV7511_REG_BKSV(4):
- case ADV7511_REG_DDC_STATUS:
- case ADV7511_REG_EDID_READ_CTRL:
- case ADV7511_REG_BSTATUS(0):
- case ADV7511_REG_BSTATUS(1):
- case ADV7511_REG_CHIP_ID_HIGH:
- case ADV7511_REG_CHIP_ID_LOW:
- return true;
- }
-
- return false;
-}
-
-static const struct regmap_config adv7511_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = 0xff,
- .cache_type = REGCACHE_RBTREE,
- .reg_defaults_raw = adv7511_register_defaults,
- .num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
-
- .volatile_reg = adv7511_register_volatile,
-};
-
-/* -----------------------------------------------------------------------------
- * Hardware configuration
- */
-
-static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
- const uint16_t *coeff,
- unsigned int scaling_factor)
-{
- unsigned int i;
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
- ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
-
- if (enable) {
- for (i = 0; i < 12; ++i) {
- regmap_update_bits(adv7511->regmap,
- ADV7511_REG_CSC_UPPER(i),
- 0x1f, coeff[i] >> 8);
- regmap_write(adv7511->regmap,
- ADV7511_REG_CSC_LOWER(i),
- coeff[i] & 0xff);
- }
- }
-
- if (enable)
- regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
- 0xe0, 0x80 | (scaling_factor << 5));
- else
- regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
- 0x80, 0x00);
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
- ADV7511_CSC_UPDATE_MODE, 0);
-}
-
-static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
-{
- if (packet & 0xff)
- regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
- packet, 0xff);
-
- if (packet & 0xff00) {
- packet >>= 8;
- regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
- packet, 0xff);
- }
-
- return 0;
-}
-
-static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
-{
- if (packet & 0xff)
- regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
- packet, 0x00);
-
- if (packet & 0xff00) {
- packet >>= 8;
- regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
- packet, 0x00);
- }
-
- return 0;
-}
-
-/* Coefficients for adv7511 color space conversion */
-static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
- 0x0734, 0x04ad, 0x0000, 0x1c1b,
- 0x1ddc, 0x04ad, 0x1f24, 0x0135,
- 0x0000, 0x04ad, 0x087c, 0x1b77,
-};
-
-static void adv7511_set_config_csc(struct adv7511 *adv7511,
- struct drm_connector *connector,
- bool rgb)
-{
- struct adv7511_video_config config;
- bool output_format_422, output_format_ycbcr;
- unsigned int mode;
- uint8_t infoframe[17];
-
- if (adv7511->edid)
- config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
- else
- config.hdmi_mode = false;
-
- hdmi_avi_infoframe_init(&config.avi_infoframe);
-
- config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
-
- if (rgb) {
- config.csc_enable = false;
- config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
- } else {
- config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
- config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
-
- if ((connector->display_info.color_formats &
- DRM_COLOR_FORMAT_YCRCB422) &&
- config.hdmi_mode) {
- config.csc_enable = false;
- config.avi_infoframe.colorspace =
- HDMI_COLORSPACE_YUV422;
- } else {
- config.csc_enable = true;
- config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
- }
- }
-
- if (config.hdmi_mode) {
- mode = ADV7511_HDMI_CFG_MODE_HDMI;
-
- switch (config.avi_infoframe.colorspace) {
- case HDMI_COLORSPACE_YUV444:
- output_format_422 = false;
- output_format_ycbcr = true;
- break;
- case HDMI_COLORSPACE_YUV422:
- output_format_422 = true;
- output_format_ycbcr = true;
- break;
- default:
- output_format_422 = false;
- output_format_ycbcr = false;
- break;
- }
- } else {
- mode = ADV7511_HDMI_CFG_MODE_DVI;
- output_format_422 = false;
- output_format_ycbcr = false;
- }
-
- adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
-
- adv7511_set_colormap(adv7511, config.csc_enable,
- config.csc_coefficents,
- config.csc_scaling_factor);
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
- (output_format_422 << 7) | output_format_ycbcr);
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
- ADV7511_HDMI_CFG_MODE_MASK, mode);
-
- hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
- sizeof(infoframe));
-
- /* The AVI infoframe id is not configurable */
- regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
- infoframe + 1, sizeof(infoframe) - 1);
-
- adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
-}
-
-static void adv7511_set_link_config(struct adv7511 *adv7511,
- const struct adv7511_link_config *config)
-{
- /*
- * The input style values documented in the datasheet don't match the
- * hardware register field values :-(
- */
- static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
-
- unsigned int clock_delay;
- unsigned int color_depth;
- unsigned int input_id;
-
- clock_delay = (config->clock_delay + 1200) / 400;
- color_depth = config->input_color_depth == 8 ? 3
- : (config->input_color_depth == 10 ? 1 : 2);
-
- /* TODO Support input ID 6 */
- if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
- input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
- ? 5 : 0;
- else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
- input_id = config->embedded_sync ? 8 : 7;
- else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
- input_id = config->embedded_sync ? 4 : 3;
- else
- input_id = config->embedded_sync ? 2 : 1;
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
- input_id);
- regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
- (color_depth << 4) |
- (input_styles[config->input_style] << 2));
- regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
- config->input_justification << 3);
- regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
- config->sync_pulse << 2);
-
- regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
-
- adv7511->embedded_sync = config->embedded_sync;
- adv7511->hsync_polarity = config->hsync_polarity;
- adv7511->vsync_polarity = config->vsync_polarity;
- adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
-}
-
-static void adv7511_power_on(struct adv7511 *adv7511)
-{
- adv7511->current_edid_segment = -1;
-
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN, 0);
- if (adv7511->i2c_main->irq) {
- /*
- * Documentation says the INT_ENABLE registers are reset in
- * POWER_DOWN mode. My 7511w preserved the bits, however.
- * Still, let's be safe and stick to the documentation.
- */
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
- ADV7511_INT0_EDID_READY);
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
- ADV7511_INT1_DDC_ERROR);
- }
-
- /*
- * Per spec it is allowed to pulse the HPD signal to indicate that the
- * EDID information has changed. Some monitors do this when they wakeup
- * from standby or are enabled. When the HPD goes low the adv7511 is
- * reset and the outputs are disabled which might cause the monitor to
- * go to standby again. To avoid this we ignore the HPD pin for the
- * first few seconds after enabling the output.
- */
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
- ADV7511_REG_POWER2_HPD_SRC_MASK,
- ADV7511_REG_POWER2_HPD_SRC_NONE);
-
- /*
- * Most of the registers are reset during power down or when HPD is low.
- */
- regcache_sync(adv7511->regmap);
-
- adv7511->powered = true;
-}
-
-static void adv7511_power_off(struct adv7511 *adv7511)
-{
- /* TODO: setup additional power down modes */
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN,
- ADV7511_POWER_POWER_DOWN);
- regcache_mark_dirty(adv7511->regmap);
-
- adv7511->powered = false;
-}
-
-/* -----------------------------------------------------------------------------
- * Interrupt and hotplug detection
- */
-
-static bool adv7511_hpd(struct adv7511 *adv7511)
-{
- unsigned int irq0;
- int ret;
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
- if (ret < 0)
- return false;
-
- if (irq0 & ADV7511_INT0_HPD) {
- regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
- ADV7511_INT0_HPD);
- return true;
- }
-
- return false;
-}
-
-static int adv7511_irq_process(struct adv7511 *adv7511)
-{
- unsigned int irq0, irq1;
- int ret;
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
- if (ret < 0)
- return ret;
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
- if (ret < 0)
- return ret;
-
- regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
- regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
-
- if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
- drm_helper_hpd_irq_event(adv7511->encoder->dev);
-
- if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
- adv7511->edid_read = true;
-
- if (adv7511->i2c_main->irq)
- wake_up_all(&adv7511->wq);
- }
-
- return 0;
-}
-
-static irqreturn_t adv7511_irq_handler(int irq, void *devid)
-{
- struct adv7511 *adv7511 = devid;
- int ret;
-
- ret = adv7511_irq_process(adv7511);
- return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
-}
-
-/* -----------------------------------------------------------------------------
- * EDID retrieval
- */
-
-static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
-{
- int ret;
-
- if (adv7511->i2c_main->irq) {
- ret = wait_event_interruptible_timeout(adv7511->wq,
- adv7511->edid_read, msecs_to_jiffies(timeout));
- } else {
- for (; timeout > 0; timeout -= 25) {
- ret = adv7511_irq_process(adv7511);
- if (ret < 0)
- break;
-
- if (adv7511->edid_read)
- break;
-
- msleep(25);
- }
- }
-
- return adv7511->edid_read ? 0 : -EIO;
-}
-
-static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
- size_t len)
-{
- struct adv7511 *adv7511 = data;
- struct i2c_msg xfer[2];
- uint8_t offset;
- unsigned int i;
- int ret;
-
- if (len > 128)
- return -EINVAL;
-
- if (adv7511->current_edid_segment != block / 2) {
- unsigned int status;
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
- &status);
- if (ret < 0)
- return ret;
-
- if (status != 2) {
- adv7511->edid_read = false;
- regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
- block);
- ret = adv7511_wait_for_edid(adv7511, 200);
- if (ret < 0)
- return ret;
- }
-
- /* Break this apart, hopefully more I2C controllers will
- * support 64 byte transfers than 256 byte transfers
- */
-
- xfer[0].addr = adv7511->i2c_edid->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = &offset;
- xfer[1].addr = adv7511->i2c_edid->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 64;
- xfer[1].buf = adv7511->edid_buf;
-
- offset = 0;
-
- for (i = 0; i < 4; ++i) {
- ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
- ARRAY_SIZE(xfer));
- if (ret < 0)
- return ret;
- else if (ret != 2)
- return -EIO;
-
- xfer[1].buf += 64;
- offset += 64;
- }
-
- adv7511->current_edid_segment = block / 2;
- }
-
- if (block % 2 == 0)
- memcpy(buf, adv7511->edid_buf, len);
- else
- memcpy(buf, adv7511->edid_buf + 128, len);
-
- return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * Encoder operations
- */
-
-static int adv7511_get_modes(struct drm_encoder *encoder,
- struct drm_connector *connector)
-{
- struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
- struct edid *edid;
- unsigned int count;
-
- /* Reading the EDID only works if the device is powered */
- if (!adv7511->powered) {
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN, 0);
- if (adv7511->i2c_main->irq) {
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
- ADV7511_INT0_EDID_READY);
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
- ADV7511_INT1_DDC_ERROR);
- }
- adv7511->current_edid_segment = -1;
- }
-
- edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
-
- if (!adv7511->powered)
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN,
- ADV7511_POWER_POWER_DOWN);
-
- kfree(adv7511->edid);
- adv7511->edid = edid;
- if (!edid)
- return 0;
-
- drm_mode_connector_update_edid_property(connector, edid);
- count = drm_add_edid_modes(connector, edid);
-
- adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
-
- return count;
-}
-
-static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
- struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-
- if (mode == DRM_MODE_DPMS_ON)
- adv7511_power_on(adv7511);
- else
- adv7511_power_off(adv7511);
-}
-
-static enum drm_connector_status
-adv7511_encoder_detect(struct drm_encoder *encoder,
- struct drm_connector *connector)
-{
- struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
- enum drm_connector_status status;
- unsigned int val;
- bool hpd;
- int ret;
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
- if (ret < 0)
- return connector_status_disconnected;
-
- if (val & ADV7511_STATUS_HPD)
- status = connector_status_connected;
- else
- status = connector_status_disconnected;
-
- hpd = adv7511_hpd(adv7511);
-
- /* The chip resets itself when the cable is disconnected, so in case
- * there is a pending HPD interrupt and the cable is connected there was
- * at least one transition from disconnected to connected and the chip
- * has to be reinitialized. */
- if (status == connector_status_connected && hpd && adv7511->powered) {
- regcache_mark_dirty(adv7511->regmap);
- adv7511_power_on(adv7511);
- adv7511_get_modes(encoder, connector);
- if (adv7511->status == connector_status_connected)
- status = connector_status_disconnected;
- } else {
- /* Renable HPD sensing */
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
- ADV7511_REG_POWER2_HPD_SRC_MASK,
- ADV7511_REG_POWER2_HPD_SRC_BOTH);
- }
-
- adv7511->status = status;
- return status;
-}
-
-static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
- struct drm_display_mode *mode)
-{
- if (mode->clock > 165000)
- return MODE_CLOCK_HIGH;
-
- return MODE_OK;
-}
-
-static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adj_mode)
-{
- struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
- unsigned int low_refresh_rate;
- unsigned int hsync_polarity = 0;
- unsigned int vsync_polarity = 0;
-
- if (adv7511->embedded_sync) {
- unsigned int hsync_offset, hsync_len;
- unsigned int vsync_offset, vsync_len;
-
- hsync_offset = adj_mode->crtc_hsync_start -
- adj_mode->crtc_hdisplay;
- vsync_offset = adj_mode->crtc_vsync_start -
- adj_mode->crtc_vdisplay;
- hsync_len = adj_mode->crtc_hsync_end -
- adj_mode->crtc_hsync_start;
- vsync_len = adj_mode->crtc_vsync_end -
- adj_mode->crtc_vsync_start;
-
- /* The hardware vsync generator has a off-by-one bug */
- vsync_offset += 1;
-
- regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
- ((hsync_offset >> 10) & 0x7) << 5);
- regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
- (hsync_offset >> 2) & 0xff);
- regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
- ((hsync_offset & 0x3) << 6) |
- ((hsync_len >> 4) & 0x3f));
- regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
- ((hsync_len & 0xf) << 4) |
- ((vsync_offset >> 6) & 0xf));
- regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
- ((vsync_offset & 0x3f) << 2) |
- ((vsync_len >> 8) & 0x3));
- regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
- vsync_len & 0xff);
-
- hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
- vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
- } else {
- enum adv7511_sync_polarity mode_hsync_polarity;
- enum adv7511_sync_polarity mode_vsync_polarity;
-
- /**
- * If the input signal is always low or always high we want to
- * invert or let it passthrough depending on the polarity of the
- * current mode.
- **/
- if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
- mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
- else
- mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
-
- if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
- mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
- else
- mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
-
- if (adv7511->hsync_polarity != mode_hsync_polarity &&
- adv7511->hsync_polarity !=
- ADV7511_SYNC_POLARITY_PASSTHROUGH)
- hsync_polarity = 1;
-
- if (adv7511->vsync_polarity != mode_vsync_polarity &&
- adv7511->vsync_polarity !=
- ADV7511_SYNC_POLARITY_PASSTHROUGH)
- vsync_polarity = 1;
- }
-
- if (mode->vrefresh <= 24000)
- low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
- else if (mode->vrefresh <= 25000)
- low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
- else if (mode->vrefresh <= 30000)
- low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
- else
- low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-
- regmap_update_bits(adv7511->regmap, 0xfb,
- 0x6, low_refresh_rate << 1);
- regmap_update_bits(adv7511->regmap, 0x17,
- 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
-
- /*
- * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
- * supposed to give better results.
- */
-
- adv7511->f_tmds = mode->clock;
-}
-
-static const struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
- .dpms = adv7511_encoder_dpms,
- .mode_valid = adv7511_encoder_mode_valid,
- .mode_set = adv7511_encoder_mode_set,
- .detect = adv7511_encoder_detect,
- .get_modes = adv7511_get_modes,
-};
-
-/* -----------------------------------------------------------------------------
- * Probe & remove
- */
-
-static int adv7511_parse_dt(struct device_node *np,
- struct adv7511_link_config *config)
-{
- const char *str;
- int ret;
-
- memset(config, 0, sizeof(*config));
-
- of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
- if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
- config->input_color_depth != 12)
- return -EINVAL;
-
- ret = of_property_read_string(np, "adi,input-colorspace", &str);
- if (ret < 0)
- return ret;
-
- if (!strcmp(str, "rgb"))
- config->input_colorspace = HDMI_COLORSPACE_RGB;
- else if (!strcmp(str, "yuv422"))
- config->input_colorspace = HDMI_COLORSPACE_YUV422;
- else if (!strcmp(str, "yuv444"))
- config->input_colorspace = HDMI_COLORSPACE_YUV444;
- else
- return -EINVAL;
-
- ret = of_property_read_string(np, "adi,input-clock", &str);
- if (ret < 0)
- return ret;
-
- if (!strcmp(str, "1x"))
- config->input_clock = ADV7511_INPUT_CLOCK_1X;
- else if (!strcmp(str, "2x"))
- config->input_clock = ADV7511_INPUT_CLOCK_2X;
- else if (!strcmp(str, "ddr"))
- config->input_clock = ADV7511_INPUT_CLOCK_DDR;
- else
- return -EINVAL;
-
- if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
- config->input_clock != ADV7511_INPUT_CLOCK_1X) {
- ret = of_property_read_u32(np, "adi,input-style",
- &config->input_style);
- if (ret)
- return ret;
-
- if (config->input_style < 1 || config->input_style > 3)
- return -EINVAL;
-
- ret = of_property_read_string(np, "adi,input-justification",
- &str);
- if (ret < 0)
- return ret;
-
- if (!strcmp(str, "left"))
- config->input_justification =
- ADV7511_INPUT_JUSTIFICATION_LEFT;
- else if (!strcmp(str, "evenly"))
- config->input_justification =
- ADV7511_INPUT_JUSTIFICATION_EVENLY;
- else if (!strcmp(str, "right"))
- config->input_justification =
- ADV7511_INPUT_JUSTIFICATION_RIGHT;
- else
- return -EINVAL;
-
- } else {
- config->input_style = 1;
- config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
- }
-
- of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
- if (config->clock_delay < -1200 || config->clock_delay > 1600)
- return -EINVAL;
-
- config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
-
- /* Hardcode the sync pulse configurations for now. */
- config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
- config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
- config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
-
- return 0;
-}
-
-static const int edid_i2c_addr = 0x7e;
-static const int packet_i2c_addr = 0x70;
-static const int cec_i2c_addr = 0x78;
-
-static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
-{
- struct adv7511_link_config link_config;
- struct adv7511 *adv7511;
- struct device *dev = &i2c->dev;
- unsigned int val;
- int ret;
-
- if (!dev->of_node)
- return -EINVAL;
-
- adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
- if (!adv7511)
- return -ENOMEM;
-
- adv7511->powered = false;
- adv7511->status = connector_status_disconnected;
-
- ret = adv7511_parse_dt(dev->of_node, &link_config);
- if (ret)
- return ret;
-
- /*
- * The power down GPIO is optional. If present, toggle it from active to
- * inactive to wake up the encoder.
- */
- adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
- if (IS_ERR(adv7511->gpio_pd))
- return PTR_ERR(adv7511->gpio_pd);
-
- if (adv7511->gpio_pd) {
- mdelay(5);
- gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
- }
-
- adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
- if (IS_ERR(adv7511->regmap))
- return PTR_ERR(adv7511->regmap);
-
- ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
- if (ret)
- return ret;
- dev_dbg(dev, "Rev. %d\n", val);
-
- ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
- ARRAY_SIZE(adv7511_fixed_registers));
- if (ret)
- return ret;
-
- regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
- regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
- packet_i2c_addr);
- regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
- adv7511_packet_disable(adv7511, 0xffff);
-
- adv7511->i2c_main = i2c;
- adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
- if (!adv7511->i2c_edid)
- return -ENOMEM;
-
- if (i2c->irq) {
- init_waitqueue_head(&adv7511->wq);
-
- ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
- adv7511_irq_handler,
- IRQF_ONESHOT, dev_name(dev),
- adv7511);
- if (ret)
- goto err_i2c_unregister_device;
- }
-
- /* CEC is unused for now */
- regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
- ADV7511_CEC_CTRL_POWER_DOWN);
-
- adv7511_power_off(adv7511);
-
- i2c_set_clientdata(i2c, adv7511);
-
- adv7511_set_link_config(adv7511, &link_config);
-
- return 0;
-
-err_i2c_unregister_device:
- i2c_unregister_device(adv7511->i2c_edid);
-
- return ret;
-}
-
-static int adv7511_remove(struct i2c_client *i2c)
-{
- struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
-
- i2c_unregister_device(adv7511->i2c_edid);
-
- kfree(adv7511->edid);
-
- return 0;
-}
-
-static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
- struct drm_encoder_slave *encoder)
-{
-
- struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
-
- encoder->slave_priv = adv7511;
- encoder->slave_funcs = &adv7511_encoder_funcs;
-
- adv7511->encoder = &encoder->base;
-
- return 0;
-}
-
-static const struct i2c_device_id adv7511_i2c_ids[] = {
- { "adv7511", 0 },
- { "adv7511w", 0 },
- { "adv7513", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
-
-static const struct of_device_id adv7511_of_ids[] = {
- { .compatible = "adi,adv7511", },
- { .compatible = "adi,adv7511w", },
- { .compatible = "adi,adv7513", },
- { }
-};
-MODULE_DEVICE_TABLE(of, adv7511_of_ids);
-
-static struct drm_i2c_encoder_driver adv7511_driver = {
- .i2c_driver = {
- .driver = {
- .name = "adv7511",
- .of_match_table = adv7511_of_ids,
- },
- .id_table = adv7511_i2c_ids,
- .probe = adv7511_probe,
- .remove = adv7511_remove,
- },
-
- .encoder_init = adv7511_encoder_init,
-};
-
-static int __init adv7511_init(void)
-{
- return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
-}
-module_init(adv7511_init);
-
-static void __exit adv7511_exit(void)
-{
- drm_i2c_encoder_unregister(&adv7511_driver);
-}
-module_exit(adv7511_exit);
-
-MODULE_AUTHOR("Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>");
-MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h
index 38515b3..fccb86e 100644
--- a/drivers/gpu/drm/i2c/adv7511.h
+++ b/drivers/gpu/drm/i2c/adv7511.h
@@ -10,6 +10,8 @@
#define __DRM_I2C_ADV7511_H__
#include <linux/hdmi.h>
+#include <linux/gpio/consumer.h>
+#include <drm/drmP.h>
#define ADV7511_REG_CHIP_REVISION 0x00
#define ADV7511_REG_N0 0x01
@@ -286,4 +288,43 @@ struct adv7511_video_config {
struct hdmi_avi_infoframe avi_infoframe;
};
+struct adv7511 {
+ struct i2c_client *i2c_main;
+ struct i2c_client *i2c_edid;
+
+ struct regmap *regmap;
+ struct regmap *packet_memory_regmap;
+ enum drm_connector_status status;
+ bool powered;
+
+ unsigned int f_tmds;
+ unsigned int f_audio;
+
+ unsigned int audio_source;
+
+ unsigned int current_edid_segment;
+ uint8_t edid_buf[256];
+ bool edid_read;
+
+ wait_queue_head_t wq;
+ struct drm_encoder *encoder;
+
+ bool embedded_sync;
+ enum adv7511_sync_polarity vsync_polarity;
+ enum adv7511_sync_polarity hsync_polarity;
+ bool rgb;
+
+ struct edid *edid;
+
+ struct gpio_desc *gpio_pd;
+};
+
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet);
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev);
+void adv7511_audio_exit(struct device *dev);
+#endif
+
#endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/i2c/adv7511_audio.c b/drivers/gpu/drm/i2c/adv7511_audio.c
new file mode 100644
index 0000000..5562ed5
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511_audio.c
@@ -0,0 +1,310 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "adv7511.h"
+
+static const struct snd_soc_dapm_widget adv7511_dapm_widgets[] = {
+ SND_SOC_DAPM_OUTPUT("TMDS"),
+ SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route adv7511_routes[] = {
+ { "TMDS", NULL, "AIFIN" },
+};
+
+static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
+ unsigned int *cts, unsigned int *n)
+{
+ switch (fs) {
+ case 32000:
+ *n = 4096;
+ break;
+ case 44100:
+ *n = 6272;
+ break;
+ case 48000:
+ *n = 6144;
+ break;
+ }
+
+ *cts = ((f_tmds * *n) / (128 * fs)) * 1000;
+}
+
+static int adv7511_update_cts_n(struct adv7511 *adv7511)
+{
+ unsigned int cts = 0;
+ unsigned int n = 0;
+
+ adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n);
+
+ regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf);
+ regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff);
+ regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff);
+
+ regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0,
+ (cts >> 16) & 0xf);
+ regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1,
+ (cts >> 8) & 0xff);
+ regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2,
+ cts & 0xff);
+
+ return 0;
+}
+
+static int adv7511_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+ unsigned int rate;
+ unsigned int len;
+
+ switch (params_rate(params)) {
+ case 32000:
+ rate = ADV7511_SAMPLE_FREQ_32000;
+ break;
+ case 44100:
+ rate = ADV7511_SAMPLE_FREQ_44100;
+ break;
+ case 48000:
+ rate = ADV7511_SAMPLE_FREQ_48000;
+ break;
+ case 88200:
+ rate = ADV7511_SAMPLE_FREQ_88200;
+ break;
+ case 96000:
+ rate = ADV7511_SAMPLE_FREQ_96000;
+ break;
+ case 176400:
+ rate = ADV7511_SAMPLE_FREQ_176400;
+ break;
+ case 192000:
+ rate = ADV7511_SAMPLE_FREQ_192000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ len = ADV7511_I2S_SAMPLE_LEN_16;
+ break;
+ case SNDRV_PCM_FORMAT_S18_3LE:
+ len = ADV7511_I2S_SAMPLE_LEN_18;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ len = ADV7511_I2S_SAMPLE_LEN_20;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ len = ADV7511_I2S_SAMPLE_LEN_24;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ adv7511->f_audio = params_rate(params);
+
+ adv7511_update_cts_n(adv7511);
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3,
+ ADV7511_AUDIO_CFG3_LEN_MASK, len);
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
+ ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
+
+ return 0;
+}
+
+static int adv7511_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+ unsigned int audio_source, i2s_format = 0;
+ unsigned int invert_clock;
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ audio_source = ADV7511_AUDIO_SOURCE_I2S;
+ i2s_format = ADV7511_I2S_FORMAT_I2S;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ audio_source = ADV7511_AUDIO_SOURCE_I2S;
+ i2s_format = ADV7511_I2S_FORMAT_RIGHT_J;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ audio_source = ADV7511_AUDIO_SOURCE_I2S;
+ i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
+ break;
+ case SND_SOC_DAIFMT_SPDIF:
+ audio_source = ADV7511_AUDIO_SOURCE_SPDIF;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ invert_clock = 0;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ invert_clock = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70,
+ audio_source << 4);
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6),
+ invert_clock << 6);
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03,
+ i2s_format);
+
+ adv7511->audio_source = audio_source;
+
+ return 0;
+}
+
+static int adv7511_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct adv7511 *adv7511 = snd_soc_codec_get_drvdata(codec);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ switch (adv7511->audio_source) {
+ case ADV7511_AUDIO_SOURCE_I2S:
+ break;
+ case ADV7511_AUDIO_SOURCE_SPDIF:
+ regmap_update_bits(adv7511->regmap,
+ ADV7511_REG_AUDIO_CONFIG, BIT(7),
+ BIT(7));
+ break;
+ }
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_STANDBY) {
+ adv7511_packet_enable(adv7511,
+ ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+ adv7511_packet_enable(adv7511,
+ ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+ adv7511_packet_enable(adv7511,
+ ADV7511_PACKET_ENABLE_N_CTS);
+ } else {
+ adv7511_packet_disable(adv7511,
+ ADV7511_PACKET_ENABLE_AUDIO_SAMPLE);
+ adv7511_packet_disable(adv7511,
+ ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME);
+ adv7511_packet_disable(adv7511,
+ ADV7511_PACKET_ENABLE_N_CTS);
+ }
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+ BIT(7), 0);
+ break;
+ case SND_SOC_BIAS_OFF:
+ break;
+ }
+ return 0;
+}
+
+#define ADV7511_RATES (SNDRV_PCM_RATE_32000 |\
+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |\
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
+#define ADV7511_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+
+static const struct snd_soc_dai_ops adv7511_dai_ops = {
+ .hw_params = adv7511_hw_params,
+ /*.set_sysclk = adv7511_set_dai_sysclk,*/
+ .set_fmt = adv7511_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver adv7511_dai = {
+ .name = "adv7511",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = ADV7511_RATES,
+ .formats = ADV7511_FORMATS,
+ },
+ .ops = &adv7511_dai_ops,
+};
+
+static int adv7511_suspend(struct snd_soc_codec *codec)
+{
+ return adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int adv7511_resume(struct snd_soc_codec *codec)
+{
+ return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_probe(struct snd_soc_codec *codec)
+{
+ return adv7511_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+static int adv7511_remove(struct snd_soc_codec *codec)
+{
+ adv7511_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static struct snd_soc_codec_driver adv7511_codec_driver = {
+ .probe = adv7511_probe,
+ .remove = adv7511_remove,
+ .suspend = adv7511_suspend,
+ .resume = adv7511_resume,
+ .set_bias_level = adv7511_set_bias_level,
+
+ .dapm_widgets = adv7511_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(adv7511_dapm_widgets),
+ .dapm_routes = adv7511_routes,
+ .num_dapm_routes = ARRAY_SIZE(adv7511_routes),
+};
+
+int adv7511_audio_init(struct device *dev)
+{
+ return snd_soc_register_codec(dev, &adv7511_codec_driver,
+ &adv7511_dai, 1);
+}
+
+void adv7511_audio_exit(struct device *dev)
+{
+ snd_soc_unregister_codec(dev);
+}
diff --git a/drivers/gpu/drm/i2c/adv7511_core.c b/drivers/gpu/drm/i2c/adv7511_core.c
new file mode 100644
index 0000000..d54256a
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511_core.c
@@ -0,0 +1,1005 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+
+#include "adv7511.h"
+
+static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
+{
+ return to_encoder_slave(encoder)->slave_priv;
+}
+
+/* ADI recommended values for proper operation. */
+static const struct reg_sequence adv7511_fixed_registers[] = {
+ { 0x98, 0x03 },
+ { 0x9a, 0xe0 },
+ { 0x9c, 0x30 },
+ { 0x9d, 0x61 },
+ { 0xa2, 0xa4 },
+ { 0xa3, 0xa4 },
+ { 0xe0, 0xd0 },
+ { 0xf9, 0x00 },
+ { 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+ 0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+ 0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+ 0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+ 0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+ 0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+ 0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+ 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+ 0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+ 0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+ 0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+ 0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+ 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+ 0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+ 0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+ 0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+ 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ADV7511_REG_CHIP_REVISION:
+ case ADV7511_REG_SPDIF_FREQ:
+ case ADV7511_REG_CTS_AUTOMATIC1:
+ case ADV7511_REG_CTS_AUTOMATIC2:
+ case ADV7511_REG_VIC_DETECTED:
+ case ADV7511_REG_VIC_SEND:
+ case ADV7511_REG_AUX_VIC_DETECTED:
+ case ADV7511_REG_STATUS:
+ case ADV7511_REG_GC(1):
+ case ADV7511_REG_INT(0):
+ case ADV7511_REG_INT(1):
+ case ADV7511_REG_PLL_STATUS:
+ case ADV7511_REG_AN(0):
+ case ADV7511_REG_AN(1):
+ case ADV7511_REG_AN(2):
+ case ADV7511_REG_AN(3):
+ case ADV7511_REG_AN(4):
+ case ADV7511_REG_AN(5):
+ case ADV7511_REG_AN(6):
+ case ADV7511_REG_AN(7):
+ case ADV7511_REG_HDCP_STATUS:
+ case ADV7511_REG_BCAPS:
+ case ADV7511_REG_BKSV(0):
+ case ADV7511_REG_BKSV(1):
+ case ADV7511_REG_BKSV(2):
+ case ADV7511_REG_BKSV(3):
+ case ADV7511_REG_BKSV(4):
+ case ADV7511_REG_DDC_STATUS:
+ case ADV7511_REG_EDID_READ_CTRL:
+ case ADV7511_REG_BSTATUS(0):
+ case ADV7511_REG_BSTATUS(1):
+ case ADV7511_REG_CHIP_ID_HIGH:
+ case ADV7511_REG_CHIP_ID_LOW:
+ return true;
+ }
+
+ return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = 0xff,
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults_raw = adv7511_register_defaults,
+ .num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+ .volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+ const uint16_t *coeff,
+ unsigned int scaling_factor)
+{
+ unsigned int i;
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+ ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+ if (enable) {
+ for (i = 0; i < 12; ++i) {
+ regmap_update_bits(adv7511->regmap,
+ ADV7511_REG_CSC_UPPER(i),
+ 0x1f, coeff[i] >> 8);
+ regmap_write(adv7511->regmap,
+ ADV7511_REG_CSC_LOWER(i),
+ coeff[i] & 0xff);
+ }
+ }
+
+ if (enable)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+ 0xe0, 0x80 | (scaling_factor << 5));
+ else
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+ 0x80, 0x00);
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+ ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+ if (packet & 0xff)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+ packet, 0xff);
+
+ if (packet & 0xff00) {
+ packet >>= 8;
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+ packet, 0xff);
+ }
+
+ return 0;
+}
+
+int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+ if (packet & 0xff)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+ packet, 0x00);
+
+ if (packet & 0xff00) {
+ packet >>= 8;
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+ packet, 0x00);
+ }
+
+ return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+ 0x0734, 0x04ad, 0x0000, 0x1c1b,
+ 0x1ddc, 0x04ad, 0x1f24, 0x0135,
+ 0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+ struct drm_connector *connector,
+ bool rgb)
+{
+ struct adv7511_video_config config;
+ bool output_format_422, output_format_ycbcr;
+ unsigned int mode;
+ uint8_t infoframe[17];
+
+ if (adv7511->edid)
+ config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
+ else
+ config.hdmi_mode = false;
+
+ hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+ config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+ if (rgb) {
+ config.csc_enable = false;
+ config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+ } else {
+ config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+ config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+ if ((connector->display_info.color_formats &
+ DRM_COLOR_FORMAT_YCRCB422) &&
+ config.hdmi_mode) {
+ config.csc_enable = false;
+ config.avi_infoframe.colorspace =
+ HDMI_COLORSPACE_YUV422;
+ } else {
+ config.csc_enable = true;
+ config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+ }
+ }
+
+ if (config.hdmi_mode) {
+ mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+ switch (config.avi_infoframe.colorspace) {
+ case HDMI_COLORSPACE_YUV444:
+ output_format_422 = false;
+ output_format_ycbcr = true;
+ break;
+ case HDMI_COLORSPACE_YUV422:
+ output_format_422 = true;
+ output_format_ycbcr = true;
+ break;
+ default:
+ output_format_422 = false;
+ output_format_ycbcr = false;
+ break;
+ }
+ } else {
+ mode = ADV7511_HDMI_CFG_MODE_DVI;
+ output_format_422 = false;
+ output_format_ycbcr = false;
+ }
+
+ adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+ adv7511_set_colormap(adv7511, config.csc_enable,
+ config.csc_coefficents,
+ config.csc_scaling_factor);
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+ (output_format_422 << 7) | output_format_ycbcr);
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+ ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+ hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+ sizeof(infoframe));
+
+ /* The AVI infoframe id is not configurable */
+ regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+ infoframe + 1, sizeof(infoframe) - 1);
+
+ adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+ const struct adv7511_link_config *config)
+{
+ /*
+ * The input style values documented in the datasheet don't match the
+ * hardware register field values :-(
+ */
+ static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
+
+ unsigned int clock_delay;
+ unsigned int color_depth;
+ unsigned int input_id;
+
+ clock_delay = (config->clock_delay + 1200) / 400;
+ color_depth = config->input_color_depth == 8 ? 3
+ : (config->input_color_depth == 10 ? 1 : 2);
+
+ /* TODO Support input ID 6 */
+ if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+ input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
+ ? 5 : 0;
+ else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
+ input_id = config->embedded_sync ? 8 : 7;
+ else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
+ input_id = config->embedded_sync ? 4 : 3;
+ else
+ input_id = config->embedded_sync ? 2 : 1;
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+ input_id);
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+ (color_depth << 4) |
+ (input_styles[config->input_style] << 2));
+ regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+ config->input_justification << 3);
+ regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+ config->sync_pulse << 2);
+
+ regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+ adv7511->embedded_sync = config->embedded_sync;
+ adv7511->hsync_polarity = config->hsync_polarity;
+ adv7511->vsync_polarity = config->vsync_polarity;
+ adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+}
+
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+ adv7511->current_edid_segment = -1;
+
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+ ADV7511_POWER_POWER_DOWN, 0);
+ if (adv7511->i2c_main->irq) {
+ /*
+ * Documentation says the INT_ENABLE registers are reset in
+ * POWER_DOWN mode. My 7511w preserved the bits, however.
+ * Still, let's be safe and stick to the documentation.
+ */
+ regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+ ADV7511_INT0_EDID_READY);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+ ADV7511_INT1_DDC_ERROR);
+ }
+
+ /*
+ * Per spec it is allowed to pulse the HPD signal to indicate that the
+ * EDID information has changed. Some monitors do this when they wakeup
+ * from standby or are enabled. When the HPD goes low the adv7511 is
+ * reset and the outputs are disabled which might cause the monitor to
+ * go to standby again. To avoid this we ignore the HPD pin for the
+ * first few seconds after enabling the output.
+ */
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7511_REG_POWER2_HPD_SRC_MASK,
+ ADV7511_REG_POWER2_HPD_SRC_NONE);
+
+ /*
+ * Most of the registers are reset during power down or when HPD is low.
+ */
+ regcache_sync(adv7511->regmap);
+
+ adv7511->powered = true;
+}
+
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+ /* TODO: setup additional power down modes */
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+ ADV7511_POWER_POWER_DOWN,
+ ADV7511_POWER_POWER_DOWN);
+ regcache_mark_dirty(adv7511->regmap);
+
+ adv7511->powered = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+ unsigned int irq0;
+ int ret;
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+ if (ret < 0)
+ return false;
+
+ if (irq0 & ADV7511_INT0_HPD) {
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+ ADV7511_INT0_HPD);
+ return true;
+ }
+
+ return false;
+}
+
+static int adv7511_irq_process(struct adv7511 *adv7511)
+{
+ unsigned int irq0, irq1;
+ int ret;
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+ if (ret < 0)
+ return ret;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
+
+ if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
+ drm_helper_hpd_irq_event(adv7511->encoder->dev);
+
+ if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
+ adv7511->edid_read = true;
+
+ if (adv7511->i2c_main->irq)
+ wake_up_all(&adv7511->wq);
+ }
+
+ return 0;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+ struct adv7511 *adv7511 = devid;
+ int ret;
+
+ ret = adv7511_irq_process(adv7511);
+ return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
+{
+ int ret;
+
+ if (adv7511->i2c_main->irq) {
+ ret = wait_event_interruptible_timeout(adv7511->wq,
+ adv7511->edid_read, msecs_to_jiffies(timeout));
+ } else {
+ for (; timeout > 0; timeout -= 25) {
+ ret = adv7511_irq_process(adv7511);
+ if (ret < 0)
+ break;
+
+ if (adv7511->edid_read)
+ break;
+
+ msleep(25);
+ }
+ }
+
+ return adv7511->edid_read ? 0 : -EIO;
+}
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+ size_t len)
+{
+ struct adv7511 *adv7511 = data;
+ struct i2c_msg xfer[2];
+ uint8_t offset;
+ unsigned int i;
+ int ret;
+
+ if (len > 128)
+ return -EINVAL;
+
+ if (adv7511->current_edid_segment != block / 2) {
+ unsigned int status;
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+ &status);
+ if (ret < 0)
+ return ret;
+
+ if (status != 2) {
+ adv7511->edid_read = false;
+ regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+ block);
+ ret = adv7511_wait_for_edid(adv7511, 200);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Break this apart, hopefully more I2C controllers will
+ * support 64 byte transfers than 256 byte transfers
+ */
+
+ xfer[0].addr = adv7511->i2c_edid->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = &offset;
+ xfer[1].addr = adv7511->i2c_edid->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 64;
+ xfer[1].buf = adv7511->edid_buf;
+
+ offset = 0;
+
+ for (i = 0; i < 4; ++i) {
+ ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+ ARRAY_SIZE(xfer));
+ if (ret < 0)
+ return ret;
+ else if (ret != 2)
+ return -EIO;
+
+ xfer[1].buf += 64;
+ offset += 64;
+ }
+
+ adv7511->current_edid_segment = block / 2;
+ }
+
+ if (block % 2 == 0)
+ memcpy(buf, adv7511->edid_buf, len);
+ else
+ memcpy(buf, adv7511->edid_buf + 128, len);
+
+ return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Encoder operations
+ */
+
+static int adv7511_get_modes(struct drm_encoder *encoder,
+ struct drm_connector *connector)
+{
+ struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+ struct edid *edid;
+ unsigned int count;
+
+ /* Reading the EDID only works if the device is powered */
+ if (!adv7511->powered) {
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+ ADV7511_POWER_POWER_DOWN, 0);
+ if (adv7511->i2c_main->irq) {
+ regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+ ADV7511_INT0_EDID_READY);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+ ADV7511_INT1_DDC_ERROR);
+ }
+ adv7511->current_edid_segment = -1;
+ }
+
+ edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+ if (!adv7511->powered)
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+ ADV7511_POWER_POWER_DOWN,
+ ADV7511_POWER_POWER_DOWN);
+
+ kfree(adv7511->edid);
+ adv7511->edid = edid;
+ if (!edid)
+ return 0;
+
+ drm_mode_connector_update_edid_property(connector, edid);
+ count = drm_add_edid_modes(connector, edid);
+
+ adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+
+ return count;
+}
+
+static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+
+ if (mode == DRM_MODE_DPMS_ON)
+ adv7511_power_on(adv7511);
+ else
+ adv7511_power_off(adv7511);
+}
+
+static enum drm_connector_status
+adv7511_encoder_detect(struct drm_encoder *encoder,
+ struct drm_connector *connector)
+{
+ struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+ enum drm_connector_status status;
+ unsigned int val;
+ bool hpd;
+ int ret;
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+ if (ret < 0)
+ return connector_status_disconnected;
+
+ if (val & ADV7511_STATUS_HPD)
+ status = connector_status_connected;
+ else
+ status = connector_status_disconnected;
+
+ hpd = adv7511_hpd(adv7511);
+
+ /* The chip resets itself when the cable is disconnected, so in case
+ * there is a pending HPD interrupt and the cable is connected there was
+ * at least one transition from disconnected to connected and the chip
+ * has to be reinitialized. */
+ if (status == connector_status_connected && hpd && adv7511->powered) {
+ regcache_mark_dirty(adv7511->regmap);
+ adv7511_power_on(adv7511);
+ adv7511_get_modes(encoder, connector);
+ if (adv7511->status == connector_status_connected)
+ status = connector_status_disconnected;
+ } else {
+ /* Renable HPD sensing */
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+ ADV7511_REG_POWER2_HPD_SRC_MASK,
+ ADV7511_REG_POWER2_HPD_SRC_BOTH);
+ }
+
+ adv7511->status = status;
+ return status;
+}
+
+static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
+ struct drm_display_mode *mode)
+{
+ if (mode->clock > 165000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
+static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adj_mode)
+{
+ struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+ unsigned int low_refresh_rate;
+ unsigned int hsync_polarity = 0;
+ unsigned int vsync_polarity = 0;
+
+ if (adv7511->embedded_sync) {
+ unsigned int hsync_offset, hsync_len;
+ unsigned int vsync_offset, vsync_len;
+
+ hsync_offset = adj_mode->crtc_hsync_start -
+ adj_mode->crtc_hdisplay;
+ vsync_offset = adj_mode->crtc_vsync_start -
+ adj_mode->crtc_vdisplay;
+ hsync_len = adj_mode->crtc_hsync_end -
+ adj_mode->crtc_hsync_start;
+ vsync_len = adj_mode->crtc_vsync_end -
+ adj_mode->crtc_vsync_start;
+
+ /* The hardware vsync generator has a off-by-one bug */
+ vsync_offset += 1;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+ ((hsync_offset >> 10) & 0x7) << 5);
+ regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+ (hsync_offset >> 2) & 0xff);
+ regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+ ((hsync_offset & 0x3) << 6) |
+ ((hsync_len >> 4) & 0x3f));
+ regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+ ((hsync_len & 0xf) << 4) |
+ ((vsync_offset >> 6) & 0xf));
+ regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+ ((vsync_offset & 0x3f) << 2) |
+ ((vsync_len >> 8) & 0x3));
+ regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+ vsync_len & 0xff);
+
+ hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+ vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+ } else {
+ enum adv7511_sync_polarity mode_hsync_polarity;
+ enum adv7511_sync_polarity mode_vsync_polarity;
+
+ /**
+ * If the input signal is always low or always high we want to
+ * invert or let it passthrough depending on the polarity of the
+ * current mode.
+ **/
+ if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+ else
+ mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+ if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+ else
+ mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+ if (adv7511->hsync_polarity != mode_hsync_polarity &&
+ adv7511->hsync_polarity !=
+ ADV7511_SYNC_POLARITY_PASSTHROUGH)
+ hsync_polarity = 1;
+
+ if (adv7511->vsync_polarity != mode_vsync_polarity &&
+ adv7511->vsync_polarity !=
+ ADV7511_SYNC_POLARITY_PASSTHROUGH)
+ vsync_polarity = 1;
+ }
+
+ if (mode->vrefresh <= 24000)
+ low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+ else if (mode->vrefresh <= 25000)
+ low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+ else if (mode->vrefresh <= 30000)
+ low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+ else
+ low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+ regmap_update_bits(adv7511->regmap, 0xfb,
+ 0x6, low_refresh_rate << 1);
+ regmap_update_bits(adv7511->regmap, 0x17,
+ 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+ /*
+ * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+ * supposed to give better results.
+ */
+
+ adv7511->f_tmds = mode->clock;
+}
+
+static const struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
+ .dpms = adv7511_encoder_dpms,
+ .mode_valid = adv7511_encoder_mode_valid,
+ .mode_set = adv7511_encoder_mode_set,
+ .detect = adv7511_encoder_detect,
+ .get_modes = adv7511_get_modes,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static int adv7511_parse_dt(struct device_node *np,
+ struct adv7511_link_config *config)
+{
+ const char *str;
+ int ret;
+
+ memset(config, 0, sizeof(*config));
+
+ of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+ if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+ config->input_color_depth != 12)
+ return -EINVAL;
+
+ ret = of_property_read_string(np, "adi,input-colorspace", &str);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(str, "rgb"))
+ config->input_colorspace = HDMI_COLORSPACE_RGB;
+ else if (!strcmp(str, "yuv422"))
+ config->input_colorspace = HDMI_COLORSPACE_YUV422;
+ else if (!strcmp(str, "yuv444"))
+ config->input_colorspace = HDMI_COLORSPACE_YUV444;
+ else
+ return -EINVAL;
+
+ ret = of_property_read_string(np, "adi,input-clock", &str);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(str, "1x"))
+ config->input_clock = ADV7511_INPUT_CLOCK_1X;
+ else if (!strcmp(str, "2x"))
+ config->input_clock = ADV7511_INPUT_CLOCK_2X;
+ else if (!strcmp(str, "ddr"))
+ config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+ else
+ return -EINVAL;
+
+ if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
+ config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+ ret = of_property_read_u32(np, "adi,input-style",
+ &config->input_style);
+ if (ret)
+ return ret;
+
+ if (config->input_style < 1 || config->input_style > 3)
+ return -EINVAL;
+
+ ret = of_property_read_string(np, "adi,input-justification",
+ &str);
+ if (ret < 0)
+ return ret;
+
+ if (!strcmp(str, "left"))
+ config->input_justification =
+ ADV7511_INPUT_JUSTIFICATION_LEFT;
+ else if (!strcmp(str, "evenly"))
+ config->input_justification =
+ ADV7511_INPUT_JUSTIFICATION_EVENLY;
+ else if (!strcmp(str, "right"))
+ config->input_justification =
+ ADV7511_INPUT_JUSTIFICATION_RIGHT;
+ else
+ return -EINVAL;
+
+ } else {
+ config->input_style = 1;
+ config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+ }
+
+ of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+ if (config->clock_delay < -1200 || config->clock_delay > 1600)
+ return -EINVAL;
+
+ config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+ /* Hardcode the sync pulse configurations for now. */
+ config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+ config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+ config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+ return 0;
+}
+
+static const int edid_i2c_addr = 0x7e;
+static const int packet_i2c_addr = 0x70;
+static const int cec_i2c_addr = 0x78;
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ struct adv7511_link_config link_config;
+ struct adv7511 *adv7511;
+ struct device *dev = &i2c->dev;
+ unsigned int val;
+ int ret;
+
+ if (!dev->of_node)
+ return -EINVAL;
+
+ adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+ if (!adv7511)
+ return -ENOMEM;
+
+ adv7511->powered = false;
+ adv7511->status = connector_status_disconnected;
+
+ ret = adv7511_parse_dt(dev->of_node, &link_config);
+ if (ret)
+ return ret;
+
+ /*
+ * The power down GPIO is optional. If present, toggle it from active to
+ * inactive to wake up the encoder.
+ */
+ adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+ if (IS_ERR(adv7511->gpio_pd))
+ return PTR_ERR(adv7511->gpio_pd);
+
+ if (adv7511->gpio_pd) {
+ mdelay(5);
+ gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+ }
+
+ adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+ if (IS_ERR(adv7511->regmap))
+ return PTR_ERR(adv7511->regmap);
+
+ ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+ if (ret)
+ return ret;
+ dev_dbg(dev, "Rev. %d\n", val);
+
+ ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
+ ARRAY_SIZE(adv7511_fixed_registers));
+ if (ret)
+ return ret;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+ regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+ packet_i2c_addr);
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+ adv7511_packet_disable(adv7511, 0xffff);
+
+ adv7511->i2c_main = i2c;
+ adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+ if (!adv7511->i2c_edid)
+ return -ENOMEM;
+
+ if (i2c->irq) {
+ init_waitqueue_head(&adv7511->wq);
+
+ ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+ adv7511_irq_handler,
+ IRQF_ONESHOT, dev_name(dev),
+ adv7511);
+ if (ret)
+ goto err_i2c_unregister_device;
+ }
+
+ /* CEC is unused for now */
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+ ADV7511_CEC_CTRL_POWER_DOWN);
+
+ adv7511_power_off(adv7511);
+
+ i2c_set_clientdata(i2c, adv7511);
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+ adv7511_audio_init(&i2c->dev);
+#endif
+
+ adv7511_set_link_config(adv7511, &link_config);
+
+ /* Enable HDMI mode */
+ regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+ ADV7511_HDMI_CFG_MODE_MASK,
+ ADV7511_HDMI_CFG_MODE_HDMI);
+
+ return 0;
+
+err_i2c_unregister_device:
+ i2c_unregister_device(adv7511->i2c_edid);
+
+ return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+ struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+ i2c_unregister_device(adv7511->i2c_edid);
+
+ kfree(adv7511->edid);
+
+ return 0;
+}
+
+static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
+ struct drm_encoder_slave *encoder)
+{
+
+ struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+ encoder->slave_priv = adv7511;
+ encoder->slave_funcs = &adv7511_encoder_funcs;
+
+ adv7511->encoder = &encoder->base;
+
+ return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+ { "adv7511", 0 },
+ { "adv7511w", 0 },
+ { "adv7513", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+ { .compatible = "adi,adv7511", },
+ { .compatible = "adi,adv7511w", },
+ { .compatible = "adi,adv7513", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct drm_i2c_encoder_driver adv7511_driver = {
+ .i2c_driver = {
+ .driver = {
+ .name = "adv7511",
+ .of_match_table = adv7511_of_ids,
+ },
+ .id_table = adv7511_i2c_ids,
+ .probe = adv7511_probe,
+ .remove = adv7511_remove,
+ },
+
+ .encoder_init = adv7511_encoder_init,
+};
+
+static int __init adv7511_init(void)
+{
+ return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+ drm_i2c_encoder_unregister(&adv7511_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 964b7de..539c091 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -33,6 +33,7 @@ struct snd_compr_stream;
#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
#define SND_SOC_DAIFMT_AC97 6 /* AC97 */
#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
+#define SND_SOC_DAIFMT_SPDIF 8 /* SPDIF */
/* left and right justified also known as MSB and LSB respectively */
#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/4] ARC: axs10x: Update defconfigs so that audio is enabled
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 9:41 ` [PATCH 1/4] drm/i2c/adv7511: Add audio support Jose Abreu
@ 2016-03-28 9:41 ` Jose Abreu
[not found] ` <88015401488eed4f253f49d5831be13e0007339f.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 9:41 ` [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver Jose Abreu
2016-03-28 9:41 ` [PATCH 4/4] ARC: axs10x: Update defconfigs so that I2S is enabled Jose Abreu
3 siblings, 1 reply; 8+ messages in thread
From: Jose Abreu @ 2016-03-28 9:41 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w,
broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU,
tiwai-l3A5Bk7waGM, grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
mjonker-HKixBCOQz3hWk0Htik3J/w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, Jose Abreu
The defconfigs for the AXS boards were updated so that
ALSA SoC is enabled and also the audio for the ADV7511
HDMI transmitter.
Signed-off-by: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
arch/arc/configs/axs101_defconfig | 3 +++
arch/arc/configs/axs103_defconfig | 5 +++++
arch/arc/configs/axs103_smp_defconfig | 5 +++++
3 files changed, 13 insertions(+)
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index e359099..7c22163 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -113,3 +113,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 323486d..d63aef0 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -76,12 +76,14 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_DRM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
+CONFIG_DRM_I2C_ADV7511=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -114,3 +116,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 66191cd..f4b51ce 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -77,12 +77,14 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_DRM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_LOGO=y
+CONFIG_DRM_I2C_ADV7511=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -115,3 +117,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 9:41 ` [PATCH 1/4] drm/i2c/adv7511: Add audio support Jose Abreu
2016-03-28 9:41 ` [PATCH 2/4] ARC: axs10x: Update defconfigs so that audio is enabled Jose Abreu
@ 2016-03-28 9:41 ` Jose Abreu
[not found] ` <7aaad0b57652fc724be7b447790c194645321173.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 9:41 ` [PATCH 4/4] ARC: axs10x: Update defconfigs so that I2S is enabled Jose Abreu
3 siblings, 1 reply; 8+ messages in thread
From: Jose Abreu @ 2016-03-28 9:41 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w,
broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU,
tiwai-l3A5Bk7waGM, grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
mjonker-HKixBCOQz3hWk0Htik3J/w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, Jose Abreu
HDMI audio support was added to the AXS board using an
I2S cpu driver and a custom platform driver.
The platform driver supports two channels @ 16 bits with
rates 32k, 44.1k and 48k. ALSA Simple audio card is used to
glue the cpu, platform and codec driver (adv7511).
Signed-off-by: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
arch/arc/boot/dts/axs10x_mb.dtsi | 20 +-
sound/soc/dwc/Kconfig | 1 +
sound/soc/dwc/designware_i2s.c | 384 +++++++++++++++++++++++++++++++++++++--
3 files changed, 388 insertions(+), 17 deletions(-)
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index e00e5bb..c137376 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -130,12 +130,23 @@
interrupts = <14>;
};
- i2c@0x1e000 {
- compatible = "snps,designware-i2c";
+ i2s: i2s@0x1e000 {
+ compatible = "snps,designware-i2s";
reg = <0x1e000 0x100>;
- clock-frequency = <400000>;
- clocks = <&i2cclk>;
interrupts = <15>;
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "AXS10X HDMI Audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&adv7511>;
+ };
};
i2c@0x1f000 {
@@ -155,6 +166,7 @@
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,clock-delay = <0x03>;
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
index d50e085..bc3fae7 100644
--- a/sound/soc/dwc/Kconfig
+++ b/sound/soc/dwc/Kconfig
@@ -2,6 +2,7 @@ config SND_DESIGNWARE_I2S
tristate "Synopsys I2S Device Driver"
depends on CLKDEV_LOOKUP
select SND_SOC_GENERIC_DMAENGINE_PCM
+ select SND_SIMPLE_CARD
help
Say Y or M if you want to add support for I2S driver for
Synopsys desigwnware I2S device. The device supports upto
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index bff258d..b343c9f 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -84,11 +84,37 @@
#define MAX_CHANNEL_NUM 8
#define MIN_CHANNEL_NUM 2
+/* FPGA Version Info */
+#define FPGA_VER_INFO 0xE0011230
+#define FPGA_VER_27M 0x000FBED9
+
+/* PLL registers addresses */
+#define PLL_IDIV_ADDR 0xE00100A0
+#define PLL_FBDIV_ADDR 0xE00100A4
+#define PLL_ODIV0_ADDR 0xE00100A8
+#define PLL_ODIV1_ADDR 0xE00100AC
+
+/* PCM definitions */
+#define BUFFER_BYTES_MAX 384000
+#define PERIOD_BYTES_MIN 2048
+#define PERIODS_MIN 8
+
union dw_i2s_snd_dma_data {
struct i2s_dma_data pd;
struct snd_dmaengine_dai_dma_data dt;
};
+struct dw_pcm_binfo {
+ struct snd_pcm_substream *stream;
+ unsigned char *dma_base;
+ unsigned char *dma_pointer;
+ unsigned int period_size_frames;
+ unsigned int size;
+ snd_pcm_uframes_t period_pointer;
+ unsigned int total_periods;
+ unsigned int current_period;
+};
+
struct dw_i2s_dev {
void __iomem *i2s_base;
struct clk *clk;
@@ -100,14 +126,103 @@ struct dw_i2s_dev {
struct device *dev;
u32 ccr;
u32 xfer_resolution;
+ u32 xfer_bytes;
+ u32 fifo_th;
/* data related to DMA transfers b/w i2s and DMAC */
union dw_i2s_snd_dma_data play_dma_data;
union dw_i2s_snd_dma_data capture_dma_data;
struct i2s_clk_config_data config;
int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
+ struct dw_pcm_binfo binfo;
+};
+
+struct dw_i2s_pll {
+ unsigned int rate;
+ unsigned int data_width;
+ unsigned int idiv;
+ unsigned int fbdiv;
+ unsigned int odiv0;
+ unsigned int odiv1;
+};
+
+static const struct dw_i2s_pll dw_i2s_pll_cfg_27m[] = {
+ /* 27Mhz */
+ { 32000, 16, 0x104, 0x451, 0x10E38, 0x2000 },
+ { 44100, 16, 0x104, 0x596, 0x10D35, 0x2000 },
+ { 48000, 16, 0x208, 0xA28, 0x10B2C, 0x2000 },
+ { 0, 0, 0, 0, 0, 0 },
};
+static const struct dw_i2s_pll dw_i2s_pll_cfg_28m[] = {
+ /* 28.224Mhz */
+ { 32000, 16, 0x82, 0x105, 0x107DF, 0x2000 },
+ { 44100, 16, 0x28A, 0x1, 0x10001, 0x2000 },
+ { 48000, 16, 0xA28, 0x187, 0x10042, 0x2000 },
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static const struct snd_pcm_hardware dw_pcm_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000,
+ .rate_min = 32000,
+ .rate_max = 48000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = BUFFER_BYTES_MAX,
+ .period_bytes_min = PERIOD_BYTES_MIN,
+ .period_bytes_max = BUFFER_BYTES_MAX / PERIODS_MIN,
+ .periods_min = PERIODS_MIN,
+ .periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN,
+};
+
+static int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
+ struct dw_pcm_binfo *bi)
+{
+ struct snd_pcm_runtime *rt = NULL;
+ int i;
+
+ if (!bi)
+ return -EINVAL;
+
+ rt = bi->stream->runtime;
+
+ for (i = 0; i < buf_size; i++) {
+ if (bi->stream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ memcpy(&lsample[i], bi->dma_pointer, bytes);
+ bi->dma_pointer += bytes;
+ memcpy(&rsample[i], bi->dma_pointer, bytes);
+ bi->dma_pointer += bytes;
+ } else {
+ memcpy(bi->dma_pointer, &lsample[i], bytes);
+ bi->dma_pointer += bytes;
+ memcpy(bi->dma_pointer, &rsample[i], bytes);
+ bi->dma_pointer += bytes;
+ }
+ }
+ bi->period_pointer += bytes_to_frames(rt, bytes * 2 * buf_size);
+
+ if (bi->period_pointer >=
+ (bi->period_size_frames * bi->current_period)) {
+ bi->current_period++;
+ if (bi->current_period > bi->total_periods) {
+ bi->dma_pointer = bi->dma_base;
+ bi->period_pointer = 0;
+ bi->current_period = 1;
+ }
+
+ snd_pcm_period_elapsed(bi->stream);
+ }
+
+ return 0;
+}
+
static inline void i2s_write_reg(void __iomem *io_base, int reg, u32 val)
{
writel(val, io_base + reg);
@@ -144,20 +259,93 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
}
}
+static irqreturn_t i2s_irq_handler(int irq, void *dev_id)
+{
+ struct dw_i2s_dev *dev = dev_id;
+ u32 isr[4], sleft[dev->fifo_th], sright[dev->fifo_th];
+ int i, j;
+
+ for (i = 0; i < 4; i++)
+ isr[i] = i2s_read_reg(dev->i2s_base, ISR(i));
+
+ for (i = 0; i < 4; i++) {
+ /* Copy only to/from first two channels.
+ TODO: Remaining channels */
+ if ((isr[i] & 0x10) && (i == 0) && (dev->binfo.stream->stream ==
+ SNDRV_PCM_STREAM_PLAYBACK)) {
+ /* TXFE - TX FIFO is empty */
+ dw_pcm_transfer(sleft, sright, dev->xfer_bytes,
+ dev->fifo_th, &dev->binfo);
+
+ for (j = 0; j < dev->fifo_th; j++) {
+ i2s_write_reg(dev->i2s_base, LRBR_LTHR(i),
+ sleft[j]);
+ i2s_write_reg(dev->i2s_base, RRBR_RTHR(i),
+ sright[j]);
+ }
+ } else if ((isr[i] & 0x1) && (i == 0) &&
+ (dev->binfo.stream->stream ==
+ SNDRV_PCM_STREAM_CAPTURE)) {
+ /* RSFE - RX FIFO is full */
+ for (j = 0; j < dev->fifo_th; j++) {
+ sleft[j] = i2s_read_reg(dev->i2s_base,
+ LRBR_LTHR(i));
+ sright[j] = i2s_read_reg(dev->i2s_base,
+ RRBR_RTHR(i));
+ }
+
+ dw_pcm_transfer(sleft, sright, dev->xfer_bytes,
+ dev->fifo_th, &dev->binfo);
+ }
+ }
+
+ i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK);
+ i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE);
+
+ return IRQ_HANDLED;
+}
+
+static int i2s_pll_cfg(struct i2s_clk_config_data *config)
+{
+ const struct dw_i2s_pll *pll_cfg;
+ u32 rate = config->sample_rate;
+ u32 data_width = config->data_width;
+ int i;
+
+ if (readl((void *)FPGA_VER_INFO) <= FPGA_VER_27M)
+ pll_cfg = dw_i2s_pll_cfg_27m;
+ else
+ pll_cfg = dw_i2s_pll_cfg_28m;
+
+ for (i = 0; pll_cfg[i].rate != 0; i++) {
+ if ((pll_cfg[i].rate == rate) &&
+ (pll_cfg[i].data_width == data_width)) {
+ writel(pll_cfg[i].idiv, (void *)PLL_IDIV_ADDR);
+ writel(pll_cfg[i].fbdiv, (void *)PLL_FBDIV_ADDR);
+ writel(pll_cfg[i].odiv0, (void *)PLL_ODIV0_ADDR);
+ writel(pll_cfg[i].odiv1, (void *)PLL_ODIV1_ADDR);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
static void i2s_start(struct dw_i2s_dev *dev,
struct snd_pcm_substream *substream)
{
+ struct i2s_clk_config_data *config = &dev->config;
u32 i, irq;
i2s_write_reg(dev->i2s_base, IER, 1);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < (config->chan_nr / 2); i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x30);
}
i2s_write_reg(dev->i2s_base, ITER, 1);
} else {
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < (config->chan_nr / 2); i++) {
irq = i2s_read_reg(dev->i2s_base, IMR(i));
i2s_write_reg(dev->i2s_base, IMR(i), irq & ~0x03);
}
@@ -195,6 +383,139 @@ static void i2s_stop(struct dw_i2s_dev *dev,
}
}
+static int dw_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+ snd_soc_set_runtime_hwparams(substream, &dw_pcm_hw);
+ snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
+
+ rt->hw.rate_min = 32000;
+ rt->hw.rate_max = 48000;
+
+ dev->binfo.stream = substream;
+ rt->private_data = &dev->binfo;
+ return 0;
+}
+
+static int dw_pcm_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+static int dw_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+ int ret;
+
+ ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
+ params_buffer_bytes(hw_params));
+ if (ret < 0)
+ return ret;
+
+ memset(rt->dma_area, 0, params_buffer_bytes(hw_params));
+ bi->dma_base = rt->dma_area;
+ bi->dma_pointer = bi->dma_base;
+
+ return 0;
+}
+
+static int dw_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ int ret;
+
+ ret = snd_pcm_lib_free_vmalloc_buffer(substream);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int dw_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+ u32 buffer_size_frames = 0;
+
+ bi->period_size_frames = bytes_to_frames(rt,
+ snd_pcm_lib_period_bytes(substream));
+ bi->size = snd_pcm_lib_buffer_bytes(substream);
+ buffer_size_frames = bytes_to_frames(rt, bi->size);
+ bi->total_periods = buffer_size_frames / bi->period_size_frames;
+ bi->current_period = 1;
+
+ if ((buffer_size_frames % bi->period_size_frames) != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int dw_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t dw_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *rt = substream->runtime;
+ struct dw_pcm_binfo *bi = rt->private_data;
+
+ return bi->period_pointer;
+}
+
+static struct snd_pcm_ops dw_pcm_ops = {
+ .open = dw_pcm_open,
+ .close = dw_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = dw_pcm_hw_params,
+ .hw_free = dw_pcm_hw_free,
+ .prepare = dw_pcm_prepare,
+ .trigger = dw_pcm_trigger,
+ .pointer = dw_pcm_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static int dw_pcm_new(struct snd_soc_pcm_runtime *runtime)
+{
+ struct snd_pcm *pcm = runtime->pcm;
+ int ret;
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_DEV,
+ snd_dma_continuous_data(GFP_KERNEL),
+ dw_pcm_hw.buffer_bytes_max,
+ dw_pcm_hw.buffer_bytes_max);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void dw_pcm_free(struct snd_pcm *pcm)
+{
+ snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static struct snd_soc_platform_driver dw_pcm_soc_platform = {
+ .pcm_new = dw_pcm_new,
+ .pcm_free = dw_pcm_free,
+ .ops = &dw_pcm_ops,
+};
+
static int dw_i2s_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
@@ -231,14 +552,16 @@ static void dw_i2s_config(struct dw_i2s_dev *dev, int stream)
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
i2s_write_reg(dev->i2s_base, TCR(ch_reg),
dev->xfer_resolution);
- i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+ i2s_write_reg(dev->i2s_base, TFCR(ch_reg),
+ dev->fifo_th - 1);
irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
} else {
i2s_write_reg(dev->i2s_base, RCR(ch_reg),
dev->xfer_resolution);
- i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+ i2s_write_reg(dev->i2s_base, RFCR(ch_reg),
+ dev->fifo_th - 1);
irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
@@ -259,22 +582,25 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
config->data_width = 16;
dev->ccr = 0x00;
dev->xfer_resolution = 0x02;
+ dev->xfer_bytes = 0x02;
break;
case SNDRV_PCM_FORMAT_S24_LE:
config->data_width = 24;
dev->ccr = 0x08;
dev->xfer_resolution = 0x04;
+ dev->xfer_bytes = 0x03;
break;
case SNDRV_PCM_FORMAT_S32_LE:
config->data_width = 32;
dev->ccr = 0x10;
dev->xfer_resolution = 0x05;
+ dev->xfer_bytes = 0x04;
break;
default:
- dev_err(dev->dev, "designware-i2s: unsuppted PCM fmt");
+ dev_err(dev->dev, "designware-i2s: unsupported PCM fmt");
return -EINVAL;
}
@@ -316,6 +642,7 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
}
}
}
+
return 0;
}
@@ -498,6 +825,7 @@ static int dw_configure_dai(struct dw_i2s_dev *dev,
*/
u32 comp1 = i2s_read_reg(dev->i2s_base, dev->i2s_reg_comp1);
u32 comp2 = i2s_read_reg(dev->i2s_base, dev->i2s_reg_comp2);
+ u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
u32 idx;
if (dev->capability & DWC_I2S_RECORD &&
@@ -536,6 +864,7 @@ static int dw_configure_dai(struct dw_i2s_dev *dev,
dev->capability |= DW_I2S_SLAVE;
}
+ dev->fifo_th = fifo_depth / 2;
return 0;
}
@@ -620,7 +949,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
const struct i2s_platform_data *pdata = pdev->dev.platform_data;
struct dw_i2s_dev *dev;
struct resource *res;
- int ret;
+ int ret, irq_number;
struct snd_soc_dai_driver *dw_i2s_dai;
const char *clk_id;
@@ -643,6 +972,19 @@ static int dw_i2s_probe(struct platform_device *pdev)
if (IS_ERR(dev->i2s_base))
return PTR_ERR(dev->i2s_base);
+ irq_number = platform_get_irq(pdev, 0);
+ if (irq_number <= 0) {
+ dev_err(&pdev->dev, "get irq fail\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq_number, i2s_irq_handler,
+ IRQF_SHARED, "dw_i2s_irq_handler", dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request irq fail\n");
+ return ret;
+ }
+
dev->dev = &pdev->dev;
dev->i2s_reg_comp1 = I2S_COMP_PARAM_1;
@@ -671,14 +1013,22 @@ static int dw_i2s_probe(struct platform_device *pdev)
return -ENODEV;
}
}
- dev->clk = devm_clk_get(&pdev->dev, clk_id);
- if (IS_ERR(dev->clk))
- return PTR_ERR(dev->clk);
+ if (dev->i2s_clk_cfg ||
+ of_get_property(pdev->dev.of_node, "clocks", NULL)) {
+ dev->clk = devm_clk_get(&pdev->dev, clk_id);
+
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
- ret = clk_prepare_enable(dev->clk);
- if (ret < 0)
- return ret;
+ ret = clk_prepare_enable(dev->clk);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Use internal PLL config */
+ dev->i2s_clk_cfg = i2s_pll_cfg;
+ dev->clk = NULL;
+ }
}
dev_set_drvdata(&pdev->dev, dev);
@@ -690,7 +1040,14 @@ static int dw_i2s_probe(struct platform_device *pdev)
}
if (!pdata) {
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+ if (of_get_property(pdev->dev.of_node, "dmas", NULL)) {
+ /* Using DMA */
+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+ } else {
+ ret = snd_soc_register_platform(&pdev->dev,
+ &dw_pcm_soc_platform);
+ }
+
if (ret) {
dev_err(&pdev->dev,
"Could not register PCM: %d\n", ret);
@@ -714,6 +1071,7 @@ static int dw_i2s_remove(struct platform_device *pdev)
clk_disable_unprepare(dev->clk);
pm_runtime_disable(&pdev->dev);
+ snd_soc_unregister_platform(&pdev->dev);
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/4] ARC: axs10x: Update defconfigs so that I2S is enabled
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
` (2 preceding siblings ...)
2016-03-28 9:41 ` [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver Jose Abreu
@ 2016-03-28 9:41 ` Jose Abreu
3 siblings, 0 replies; 8+ messages in thread
From: Jose Abreu @ 2016-03-28 9:41 UTC (permalink / raw)
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: airlied-cv59FeDIM0c, lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w,
broonie-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU,
tiwai-l3A5Bk7waGM, grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
Vineet.Gupta1-HKixBCOQz3hWk0Htik3J/w,
Alexey.Brodkin-HKixBCOQz3hWk0Htik3J/w,
mjonker-HKixBCOQz3hWk0Htik3J/w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, Jose Abreu
The defconfigs for the AXS boards were updated to
enable Designware I2S driver.
Signed-off-by: Jose Abreu <joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
---
arch/arc/configs/axs101_defconfig | 1 +
arch/arc/configs/axs103_defconfig | 1 +
arch/arc/configs/axs103_smp_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 7c22163..dd38d03 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -116,3 +116,4 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_DESIGNWARE_I2S=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index d63aef0..ff7162e 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -119,3 +119,4 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_DESIGNWARE_I2S=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index f4b51ce..b9f4671 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -120,3 +120,4 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
+CONFIG_SND_DESIGNWARE_I2S=y
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/4] ARC: axs10x: Update defconfigs so that audio is enabled
[not found] ` <88015401488eed4f253f49d5831be13e0007339f.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
@ 2016-03-28 11:48 ` Alexey Brodkin
0 siblings, 0 replies; 8+ messages in thread
From: Alexey Brodkin @ 2016-03-28 11:48 UTC (permalink / raw)
To: Jose Abreu
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
mjonker-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
tiwai-l3A5Bk7waGM@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Vineet Gupta, airlied-cv59FeDIM0c@public.gmane.org,
perex-/Fr2/VpizcU@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
Hi Jose,
On Mon, 2016-03-28 at 10:41 +0100, Jose Abreu wrote:
> The defconfigs for the AXS boards were updated so that
> ALSA SoC is enabled and also the audio for the ADV7511
> HDMI transmitter.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> ---
> arch/arc/configs/axs101_defconfig | 3 +++
> arch/arc/configs/axs103_defconfig | 5 +++++
> arch/arc/configs/axs103_smp_defconfig | 5 +++++
> 3 files changed, 13 insertions(+)
As Vineet suggested here http://lists.infradead.org/pipermail/linux-snps-arc/2016-February/000595.html
let's not pollute axs10x_defconfigs with new stuff but instead add all new
options to new configs that will cover everything available on ARC SDP boards.
Since those defconfigs for full SDP doesn't exist as of today please drop that change
as well as "[PATCH 4/4] ARC: axs10x: Update defconfigs so that I2S is enabled" from that
series.
I'll try to come up with mentioed new configs ASAP and then if your series is
already in upstream I'll add bits for audio through HDMI otherwise you'll add it
in some follow-up series.
-Alexey--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver
[not found] ` <7aaad0b57652fc724be7b447790c194645321173.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
@ 2016-03-28 11:55 ` Alexey Brodkin
0 siblings, 0 replies; 8+ messages in thread
From: Alexey Brodkin @ 2016-03-28 11:55 UTC (permalink / raw)
To: Jose Abreu
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
mjonker-HKixBCOQz3hWk0Htik3J/w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
tiwai-l3A5Bk7waGM@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
lgirdwoord-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Vineet Gupta, airlied-cv59FeDIM0c@public.gmane.org,
perex-/Fr2/VpizcU@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
Hi Jose,
On Mon, 2016-03-28 at 10:41 +0100, Jose Abreu wrote:
> HDMI audio support was added to the AXS board using an
> I2S cpu driver and a custom platform driver.
>
> The platform driver supports two channels @ 16 bits with
> rates 32k, 44.1k and 48k. ALSA Simple audio card is used to
> glue the cpu, platform and codec driver (adv7511).
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> ---
> arch/arc/boot/dts/axs10x_mb.dtsi | 20 +-
You should not mix DT bindings for a particular board with generic driver
fixes or improvements.
I think it makes sense to split this patch in 2:
1) Driver improvements
2) .dts update for boards that use this driver
> sound/soc/dwc/Kconfig | 1 +
> sound/soc/dwc/designware_i2s.c | 384 +++++++++++++++++++++++++++++++++++++--
> 3 files changed, 388 insertions(+), 17 deletions(-)
-Alexey--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-03-28 11:55 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-28 9:41 [PATCH 0/4] Add I2S/ADV7511 audio support for ARC AXS10x boards Jose Abreu
[not found] ` <cover.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 9:41 ` [PATCH 1/4] drm/i2c/adv7511: Add audio support Jose Abreu
2016-03-28 9:41 ` [PATCH 2/4] ARC: axs10x: Update defconfigs so that audio is enabled Jose Abreu
[not found] ` <88015401488eed4f253f49d5831be13e0007339f.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 11:48 ` Alexey Brodkin
2016-03-28 9:41 ` [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver Jose Abreu
[not found] ` <7aaad0b57652fc724be7b447790c194645321173.1458839710.git.joabreu-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-03-28 11:55 ` Alexey Brodkin
2016-03-28 9:41 ` [PATCH 4/4] ARC: axs10x: Update defconfigs so that I2S is enabled Jose Abreu
-- strict thread matches above, loose matches on Subject: below --
2016-02-19 9:39 [PATCH 0/4] Add I2S/ADV7511 audio support for ARC AXS10x boards Carlos Palminha
[not found] ` <cover.1455872448.git.palminha-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>
2016-02-19 9:40 ` [PATCH 3/4] ASoC: dwc: Add I2S HDMI audio support using custom platform driver Carlos Palminha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).