From: Sinan Kaya <okaya@codeaurora.org>
To: kvm@vger.kernel.org, timur@codeaurora.org, cov@codeaurora.org,
jcm@redhat.com, eric.auger@linaro.org
Cc: shankerd@codeaurora.org, vikrams@codeaurora.org,
marc.zyngier@arm.com, mark.rutland@arm.com,
devicetree@vger.kernel.org, vinod.koul@intel.com,
agross@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Baptiste Reynal <b.reynal@virtualopensystems.com>,
Alex Williamson <alex.williamson@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH V3 2/3] vfio, platform: make reset driver a requirement by default
Date: Mon, 28 Mar 2016 09:35:23 -0400 [thread overview]
Message-ID: <1459172124-6730-3-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1459172124-6730-1-git-send-email-okaya@codeaurora.org>
The code was allowing platform devices to be used without a supporting VFIO
reset driver. The hardware can be left in some inconsistent state after a
guest machine abort.
The reset driver will put the hardware back to safe state and disable
interrupts before returning the control back to the host machine.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/vfio/platform/vfio_amba.c | 5 +++++
drivers/vfio/platform/vfio_platform.c | 5 +++++
drivers/vfio/platform/vfio_platform_common.c | 8 +++++++-
drivers/vfio/platform/vfio_platform_private.h | 1 +
4 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
index a66479b..7585902 100644
--- a/drivers/vfio/platform/vfio_amba.c
+++ b/drivers/vfio/platform/vfio_amba.c
@@ -23,6 +23,10 @@
#define DRIVER_AUTHOR "Antonios Motakis <a.motakis@virtualopensystems.com>"
#define DRIVER_DESC "VFIO for AMBA devices - User Level meta-driver"
+static bool reset_required = true;
+module_param(reset_required, bool, 0644);
+MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
+
/* probing devices from the AMBA bus */
static struct resource *get_amba_resource(struct vfio_platform_device *vdev,
@@ -68,6 +72,7 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
vdev->get_resource = get_amba_resource;
vdev->get_irq = get_amba_irq;
vdev->parent_module = THIS_MODULE;
+ vdev->reset_required = reset_required;
ret = vfio_platform_probe_common(vdev, &adev->dev);
if (ret) {
diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
index b1cc3a7..ef89146 100644
--- a/drivers/vfio/platform/vfio_platform.c
+++ b/drivers/vfio/platform/vfio_platform.c
@@ -23,6 +23,10 @@
#define DRIVER_AUTHOR "Antonios Motakis <a.motakis@virtualopensystems.com>"
#define DRIVER_DESC "VFIO for platform devices - User Level meta-driver"
+static bool reset_required = true;
+module_param(reset_required, bool, 0644);
+MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
+
/* probing devices from the linux platform bus */
static struct resource *get_platform_resource(struct vfio_platform_device *vdev,
@@ -66,6 +70,7 @@ static int vfio_platform_probe(struct platform_device *pdev)
vdev->get_resource = get_platform_resource;
vdev->get_irq = get_platform_irq;
vdev->parent_module = THIS_MODULE;
+ vdev->reset_required = reset_required;
ret = vfio_platform_probe_common(vdev, &pdev->dev);
if (ret)
diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index c28883a..67a3163 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -637,7 +637,13 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
return ret;
}
- vfio_platform_get_reset(vdev);
+ ret = vfio_platform_get_reset(vdev);
+ if (ret && vdev->reset_required) {
+ pr_err("vfio: no reset function found for device %s\n",
+ vdev->name);
+ iommu_group_put(group);
+ return ret;
+ }
mutex_init(&vdev->igate);
return 0;
diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
index 1b95adf..b5a699a 100644
--- a/drivers/vfio/platform/vfio_platform_private.h
+++ b/drivers/vfio/platform/vfio_platform_private.h
@@ -50,6 +50,7 @@ struct vfio_platform_region {
};
struct vfio_platform_device {
+ bool reset_required;
struct vfio_platform_region *regions;
u32 num_regions;
struct vfio_platform_irq *irqs;
--
1.8.2.1
next prev parent reply other threads:[~2016-03-28 13:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-28 13:35 [PATCH V3 0/3] vfio, platform: add HIDMA and ACPI support Sinan Kaya
2016-03-28 13:35 ` [PATCH V3 1/3] vfio, platform: add support for ACPI while detecting the reset driver Sinan Kaya
2016-03-29 9:25 ` Arnd Bergmann
2016-03-29 10:59 ` okaya
2016-03-29 11:25 ` Arnd Bergmann
2016-03-29 12:15 ` okaya-sgV2jX0FEOL9JmXXK+q4OQ
2016-03-29 12:44 ` Arnd Bergmann
2016-05-01 17:55 ` Sinan Kaya
2016-03-28 13:35 ` Sinan Kaya [this message]
2016-03-28 13:35 ` [PATCH V3 3/3] vfio, platform: add QTI HIDMA " Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459172124-6730-3-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=cov@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=eric.auger@linaro.org \
--cc=jcm@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=shankerd@codeaurora.org \
--cc=timur@codeaurora.org \
--cc=vikrams@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).