[PATCH 3/4] arm64: dts: Move NS2 clock DT nodes to separate DT file

[Anup Patel <anup.patel@broadcom.com>]

For more readabilty and consistency with other Broadcom SoCs, we move
all NS2 clock DT nodes from main SoC DT file to a separate DT file.

We also update the license header in ns2.dtsi as-per new Broadcom
convention.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi | 105 ++++++++++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi       |  81 +--------------------
 2 files changed, 108 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
new file mode 100644
index 0000000..99009fd
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
@@ -0,0 +1,105 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	lcpll_ddr: lcpll_ddr@6501d058 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ddr";
+		reg = <0x6501d058 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d04c 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+				     "ddr", "ddr_ch2_unused",
+				     "ddr_ch3_unused", "ddr_ch4_unused",
+				     "ddr_ch5_unused";
+	};
+
+	lcpll_ports: lcpll_ports@6501d078 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ports";
+		reg = <0x6501d078 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d054 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ports", "wan", "rgmii",
+				     "ports_ch2_unused",
+				     "ports_ch3_unused",
+				     "ports_ch4_unused",
+				     "ports_ch5_unused";
+	};
+
+	genpll_scr: genpll_scr@6501d098 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-scr";
+		reg = <0x6501d098 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_scr", "scr", "fs",
+				     "audio_ref", "scr_ch3_unused",
+				     "scr_ch4_unused", "scr_ch5_unused";
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll_sw: genpll_sw@6501d0c4 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-sw";
+		reg = <0x6501d0c4 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_sw", "rpe", "250", "nic",
+				     "chimp", "port", "sdio";
+	};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 940ed52..0a92a68 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -1,7 +1,7 @@
 /*
  *  BSD LICENSE
  *
- *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *  Copyright (c) 2015 Broadcom.  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions
@@ -110,33 +110,6 @@
 				     <&A57_3>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
@@ -217,6 +190,8 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		#include "ns2-clock.dtsi"
+
 		dma0: dma@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
@@ -277,56 +252,6 @@
 			mmu-masters;
 		};
 
-		lcpll_ddr: lcpll_ddr@6501d058 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ddr";
-			reg = <0x6501d058 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d04c 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
-					     "ddr", "ddr_ch2_unused",
-					     "ddr_ch3_unused", "ddr_ch4_unused",
-					     "ddr_ch5_unused";
-		};
-
-		lcpll_ports: lcpll_ports@6501d078 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-lcpll-ports";
-			reg = <0x6501d078 0x20>,
-			      <0x6501c020 0x4>,
-			      <0x6501d054 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "lcpll_ports", "wan", "rgmii",
-					     "ports_ch2_unused",
-					     "ports_ch3_unused",
-					     "ports_ch4_unused",
-					     "ports_ch5_unused";
-		};
-
-		genpll_scr: genpll_scr@6501d098 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-scr";
-			reg = <0x6501d098 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_scr", "scr", "fs",
-					     "audio_ref", "scr_ch3_unused",
-					     "scr_ch4_unused", "scr_ch5_unused";
-		};
-
-		genpll_sw: genpll_sw@6501d0c4 {
-			#clock-cells = <1>;
-			compatible = "brcm,ns2-genpll-sw";
-			reg = <0x6501d0c4 0x32>,
-			      <0x6501c020 0x4>,
-			      <0x6501d044 0x4>;
-			clocks = <&osc>;
-			clock-output-names = "genpll_sw", "rpe", "250", "nic",
-					     "chimp", "port", "sdio";
-		};
-
 		crmu: crmu@65024000 {
 			compatible = "syscon";
 			reg = <0x65024000 0x100>;
-- 
1.9.1