* [PATCH] hwmon: (adm1031) Add device tree support
@ 2016-03-29 8:50 Joel Stanley
2016-03-29 9:14 ` Guenter Roeck
0 siblings, 1 reply; 4+ messages in thread
From: Joel Stanley @ 2016-03-29 8:50 UTC (permalink / raw)
To: linux, devicetree; +Cc: jk, linux-hwmon
This adds a of_device_id table so we can probe the driver using the
device tree.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
Documentation/devicetree/bindings/hwmon/adm1276.txt | 21 +++++++++++++++++++++
drivers/hwmon/pmbus/adm1275.c | 15 +++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adm1276.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adm1276.txt b/Documentation/devicetree/bindings/hwmon/adm1276.txt
new file mode 100644
index 000000000000..45eb51867c1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adm1276.txt
@@ -0,0 +1,21 @@
+* Analog Devices ADM1275 and compatabile power monitors
+
+Required node properties:
+
+ - compatible: manufacturer and chip name, one of
+
+ "adi,adm1075"
+ "adi,adm1275"
+ "adi,adm1276"
+ "adi,adm1278"
+ "adi,adm1293"
+ "adi,adm1294"
+
+- reg: I2C bus address of the device
+
+Example adm1275 node:
+
+power-sensor {
+ compatible = "adi,adm1278";
+ reg = <0x4c>;
+}
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 3baa4f4a8c5e..1476a127dbdb 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/bitops.h>
+#include <linux/of.h>
#include "pmbus.h"
enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
@@ -344,6 +345,19 @@ static const struct i2c_device_id adm1275_id[] = {
};
MODULE_DEVICE_TABLE(i2c, adm1275_id);
+#ifdef CONFIG_OF
+static const struct of_device_id adm1275_of_match[] = {
+ { .compatible = "adi,adm1075" },
+ { .compatible = "adi,adm1275" },
+ { .compatible = "adi,adm1276" },
+ { .compatible = "adi,adm1278" },
+ { .compatible = "adi,adm1293" },
+ { .compatible = "adi,adm1294" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adm1275_of_match);
+#endif
+
static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -598,6 +612,7 @@ static int adm1275_probe(struct i2c_client *client,
static struct i2c_driver adm1275_driver = {
.driver = {
.name = "adm1275",
+ .of_match_table = of_match_ptr(adm1275_of_match),
},
.probe = adm1275_probe,
.remove = pmbus_do_remove,
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] hwmon: (adm1031) Add device tree support
2016-03-29 8:50 [PATCH] hwmon: (adm1031) Add device tree support Joel Stanley
@ 2016-03-29 9:14 ` Guenter Roeck
[not found] ` <56FA477C.8030607-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
0 siblings, 1 reply; 4+ messages in thread
From: Guenter Roeck @ 2016-03-29 9:14 UTC (permalink / raw)
To: Joel Stanley, devicetree; +Cc: jk, linux-hwmon
On 03/29/2016 01:50 AM, Joel Stanley wrote:
> This adds a of_device_id table so we can probe the driver using the
> device tree.
>
The subject line does not match the driver being modified; it suggests adm1031
while in reality the adm1275 driver is being modified.
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> Documentation/devicetree/bindings/hwmon/adm1276.txt | 21 +++++++++++++++++++++
The bindings file name doesn't match the driver file name.
Besides, this should already work, through trivial bindings.
Is there a reason to believe that it does not already work ?
Guenter
> drivers/hwmon/pmbus/adm1275.c | 15 +++++++++++++++
> 2 files changed, 36 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adm1276.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adm1276.txt b/Documentation/devicetree/bindings/hwmon/adm1276.txt
> new file mode 100644
> index 000000000000..45eb51867c1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adm1276.txt
> @@ -0,0 +1,21 @@
> +* Analog Devices ADM1275 and compatabile power monitors
> +
> +Required node properties:
> +
> + - compatible: manufacturer and chip name, one of
> +
> + "adi,adm1075"
> + "adi,adm1275"
> + "adi,adm1276"
> + "adi,adm1278"
> + "adi,adm1293"
> + "adi,adm1294"
> +
> +- reg: I2C bus address of the device
> +
> +Example adm1275 node:
> +
> +power-sensor {
> + compatible = "adi,adm1278";
> + reg = <0x4c>;
> +}
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 3baa4f4a8c5e..1476a127dbdb 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -22,6 +22,7 @@
> #include <linux/slab.h>
> #include <linux/i2c.h>
> #include <linux/bitops.h>
> +#include <linux/of.h>
> #include "pmbus.h"
>
> enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
> @@ -344,6 +345,19 @@ static const struct i2c_device_id adm1275_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, adm1275_id);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id adm1275_of_match[] = {
> + { .compatible = "adi,adm1075" },
> + { .compatible = "adi,adm1275" },
> + { .compatible = "adi,adm1276" },
> + { .compatible = "adi,adm1278" },
> + { .compatible = "adi,adm1293" },
> + { .compatible = "adi,adm1294" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, adm1275_of_match);
> +#endif
> +
> static int adm1275_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -598,6 +612,7 @@ static int adm1275_probe(struct i2c_client *client,
> static struct i2c_driver adm1275_driver = {
> .driver = {
> .name = "adm1275",
> + .of_match_table = of_match_ptr(adm1275_of_match),
> },
> .probe = adm1275_probe,
> .remove = pmbus_do_remove,
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-03-29 14:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-29 8:50 [PATCH] hwmon: (adm1031) Add device tree support Joel Stanley
2016-03-29 9:14 ` Guenter Roeck
[not found] ` <56FA477C.8030607-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2016-03-29 9:34 ` Joel Stanley
2016-03-29 14:20 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).