From mboxrd@z Thu Jan 1 00:00:00 1970 From: Leo Yan Subject: [PATCH v3 4/4] arm64: dts: register Hi6220's thermal zone for power allocator Date: Tue, 29 Mar 2016 19:27:15 +0800 Message-ID: <1459250835-25561-5-git-send-email-leo.yan@linaro.org> References: <1459250835-25561-1-git-send-email-leo.yan@linaro.org> Return-path: In-Reply-To: <1459250835-25561-1-git-send-email-leo.yan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Wei Xu , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Catalin Marinas , Will Deacon , Zhang Rui , Eduardo Valentin Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Leo Yan List-Id: devicetree@vger.kernel.org With profiling Hi6220's power modeling so get dynamic coefficient and sustainable power. So pass these parameters from DT. Now enable power allocator with only one actor for CPU part, so directly use cluster0's thermal sensor for monitoring temperature. Reviewed-by: Javi Merino Signed-off-by: Leo Yan --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 35 +++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 50ba1b0..1c7b133 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -6,6 +6,7 @@ #include #include +#include / { compatible = "hisilicon,hi6220"; @@ -87,6 +88,7 @@ cooling-max-level = <0>; #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <311>; }; cpu1: cpu@1 { @@ -322,5 +324,38 @@ clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <3326>; + + /* sensor ID */ + thermal-sensors = <&tsensor 2>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <0>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html