From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Coquelin Subject: [PATCH v2 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings Date: Thu, 31 Mar 2016 17:09:31 +0200 Message-ID: <1459436979-17275-2-git-send-email-mcoquelin.stm32@gmail.com> References: <1459436979-17275-1-git-send-email-mcoquelin.stm32@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1459436979-17275-1-git-send-email-mcoquelin.stm32@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Thomas Gleixner , Jason Cooper , Marc Zyngier , Linus Walleij , Mark Rutland , Rob Herring , linux-gpio@vger.kernel.org, arnd@arndb.de Cc: devicetree@vger.kernel.org, Daniel Thompson , bruherrera@gmail.com, linux-kernel@vger.kernel.org, lee.jones@linaro.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Signed-off-by: Maxime Coquelin --- .../bindings/interrupt-controller/st,stm32-exti.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt new file mode 100644 index 000000000000..6e7703d4ff5b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -0,0 +1,20 @@ +STM32 External Interrupt Controller + +Required properties: + +- compatible: Should be "st,stm32-exti" +- reg: Specifies base physical address and size of the registers +- interrupt-controller: Indentifies the node as an interrupt controller +- #interrupt-cells: Specifies the number of cells to encode an interrupt + specifier, shall be 2 +- interrupts: interrupts references to primary interrupt controller + +Example: + +exti: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; +}; -- 1.9.1