From: Stuart Yoder <stuart.yoder@nxp.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: mark.rutland@arm.com, german.rivera@freescale.com,
linux-kernel@vger.kernel.org, Stuart Yoder <stuart.yoder@nxp.com>,
robh+dt@kernel.org, leoyang.li@nxp.com
Subject: [PATCH 2/2] arm64: dts: ls2080a: fsl-mc dt node updates
Date: Fri, 1 Apr 2016 15:54:40 -0500 [thread overview]
Message-ID: <1459544080-28598-1-git-send-email-stuart.yoder@nxp.com> (raw)
From: Stuart Yoder <stuart.yoder@nxp.com>
updates to the fsl-mc node for full functionality:
-msi-parent is needed for interrupt support
-ranges is needed to enable the bus driver to translate bus addresses
-dpmac nodes provide a basis for relating dpmac objects to PHYs
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 87 ++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 9d746c6..449c635 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -265,6 +265,93 @@
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ msi-parent = <&its>;
+ #address-cells = <3>;
+ #size-cells = <1>;
+
+ /*
+ * Region type 0x0 - MC portals
+ * Region type 0x1 - QBMAN portals
+ */
+ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+ /*
+ * Define the maximum number of MACs present on the SoC.
+ * They won't necessarily be all probed, since the
+ * Data Path Layout file and the MC firmware can put
+ * fewer actual DPMAC objects on the MC bus.
+ */
+ dpmacs {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dpmac1: dpmac@1 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <1>;
+ };
+ dpmac2: dpmac@2 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <2>;
+ };
+ dpmac3: dpmac@3 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <3>;
+ };
+ dpmac4: dpmac@4 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <4>;
+ };
+ dpmac5: dpmac@5 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <5>;
+ };
+ dpmac6: dpmac@6 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <6>;
+ };
+ dpmac7: dpmac@7 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <7>;
+ };
+ dpmac8: dpmac@8 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <8>;
+ };
+ dpmac9: dpmac@9 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <9>;
+ };
+ dpmac10: dpmac@10 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xa>;
+ };
+ dpmac11: dpmac@11 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xb>;
+ };
+ dpmac12: dpmac@12 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xc>;
+ };
+ dpmac13: dpmac@13 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xd>;
+ };
+ dpmac14: dpmac@14 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xe>;
+ };
+ dpmac15: dpmac@15 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0xf>;
+ };
+ dpmac16: dpmac@16 {
+ compatible = "fsl,qoriq-mc-dpmac";
+ reg = <0x10>;
+ };
+ };
+
};
smmu: iommu@5000000 {
--
1.7.9.5
next reply other threads:[~2016-04-01 20:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-01 20:54 Stuart Yoder [this message]
[not found] ` <1459544080-28598-1-git-send-email-stuart.yoder-3arQi8VN3Tc@public.gmane.org>
2016-04-13 5:50 ` [PATCH 2/2] arm64: dts: ls2080a: fsl-mc dt node updates Shawn Guo
2016-04-13 20:39 ` Stuart Yoder
2016-04-18 2:02 ` Shawn Guo
2016-04-18 2:30 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459544080-28598-1-git-send-email-stuart.yoder@nxp.com \
--to=stuart.yoder@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=german.rivera@freescale.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).