[PATCH 3/3] MIPS: BMIPS: improve BCM6368 device tree

["Álvaro Fernández Rojas" <noltari@gmail.com>]

- Remove unneeded leds0 alias.
- Switch to bcm6345-l1-intc interrupt controller.
- Use interrupt-controller instead of periph_intc.
- Add uart1 node.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm6368.dtsi | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 1f6b9b5..75aba97 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -32,8 +32,8 @@
 	};
 
 	aliases {
-		leds0 = &leds0;
 		uart0 = &uart0;
+		uart1 = &uart1;
 	};
 
 	cpu_intc: cpu_intc {
@@ -64,16 +64,16 @@
 			mask = <0x1>;
 		};
 
-		periph_intc: periph_intc@10000020 {
-			compatible = "brcm,bcm3380-l2-intc";
-			reg = <0x10000024 0x4 0x1000002c 0x4>,
-			      <0x10000020 0x4 0x10000028 0x4>;
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&cpu_intc>;
-			interrupts = <2>;
+			interrupts = <2>, <3>;
 		};
 
 		leds0: led-controller@100000d0 {
@@ -93,6 +93,15 @@
 			status = "disabled";
 		};
 
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
 		ehci0: usb@10001500 {
 			compatible = "brcm,bcm6368-ehci", "generic-ehci";
 			reg = <0x10001500 0x100>;
-- 
2.1.4