devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guodong Xu <guodong.xu@linaro.org>
To: xuwei5@hisilicon.com, mark.rutland@arm.com, robh@kernel.org,
	grant.likely@secretlab.ca, linus.walleij@linaro.org,
	arnd.bergmann@linaro.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	kong.kongxinwei@hisilicon.com, Guodong Xu <guodong.xu@linaro.org>
Subject: [PATCH v3 00/16] DTS for hi6220 and HiKey
Date: Tue,  5 Apr 2016 21:27:24 +0800	[thread overview]
Message-ID: <1459862860-9775-1-git-send-email-guodong.xu@linaro.org> (raw)

This patchset include dts changes for hi6220 SoC and HiKey board. These
patches apply well one by one on top of next-20160401. All tested on HiKey
and pass.

To avoid merge conflicts with patches already ack'ed by maintainers,
I picked all hi6220/hikey dts related patches into this single patchset.
And they passed the tests on HiKey.

Patch 1~3 are from hi6220 cpuidle support. It has been reviewed and
ack'ed in maillist.
[PATCH v2 RESEND 0/4] arm64: Hi6220: enable CPU idle states:
http://archive.arm.linux.org.uk/lurker/message/20160121.105346.7d3b0470.en.html

Patch 4 is for hi6220 gpio.

Patch 5 is for pinctl.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>

Patch 6 is for spi configuration.

Patch 7 adds hi6220 i2c nodes, and
patch 8 enables them for hikey board usage.

Patch 9 adds add hi6220 usb node. It has been sent to maillist.
[PATCH] arm64: dts: add hi6220 usb node
http://thread.gmane.org/gmane.linux.drivers.devicetree/146062
http://thread.gmane.org/gmane.linux.drivers.devicetree/144335/focus=134022
Acked-by: Rob Herring <robh@kernel.org>

Patch 10 and 11 are from hi6220 mailbox support. It has been reviewed and
ack'ed in maillist.
[PATCH v7 RESEND 0/4] mailbox: hisilicon: add Hi6220 mailbox driver
http://thread.gmane.org/gmane.linux.kernel/2152759/focus=2152768
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Patch 13 adds gpio LEDs device nodes.

Patch 14 adds hi655x pmic dts node and regulator support.
[PATCH v8 5/5] arm64: dts: hisilicon: Add hi655x pmic dts node
http://thread.gmane.org/gmane.linux.kernel/2151688
Acked-by: Lee Jones <lee.jones@linaro.org>

Patch 15 adds dwmmc nodes description for hi6220. It refers to two LDO's
which are defined above.
Patch 16 adds wifi device node (TI's wl1835) for HiKey board.

v3:
- update patch 2 sp804 clocks and clock-names
- add Acked-by into commits where applies.

v2:
- picked hi655x pmic dts node.
- removed dw_mmc resets property, as it is still under review.
- add 'non-removable' into dw_mmc2 for wifi

Chen Feng (1):
  arm64: dts: hikey: Add hi655x pmic dts node

Guodong Xu (4):
  arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine
    boards
  arm64: dts: hi6220: add pinctrl for uarts and enable them
  arm64: dts: add LED nodes for hi6220-hikey
  arm64: dts: add wifi nodes support for hi6220-hikey

Leo Yan (5):
  arm64: dts: Reserve memory regions for hi6220
  arm64: dts: add sp804 timer node for Hi6220
  arm64: dts: enable idle states for Hi6220
  arm64: dts: add mailbox node for Hi6220
  arm64: dts: add Hi6220's stub clock node

Xinwei Kong (2):
  arm64: dts: add all hi6220 i2c nodes
  arm64: dts: add dwmmc nodes for hi6220

Zhangfei Gao (1):
  arm64: dts: add hi6220 usb node

Zhong Kaihua (3):
  arm64: dts: Add Hi6220 gpio configuration nodes
  arm64: dts: add Hi6220 pinctrl configuration nodes
  arm64: dts: add Hi6220 spi configuration nodes

 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts   | 198 ++++++-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi        | 584 +++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hikey-gpio.dtsi    | 607 +++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi | 705 +++++++++++++++++++++++
 include/dt-bindings/pinctrl/hisi.h               |  59 ++
 5 files changed, 2149 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey-gpio.dtsi
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
 create mode 100644 include/dt-bindings/pinctrl/hisi.h

-- 
1.9.1

             reply	other threads:[~2016-04-05 13:27 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-05 13:27 Guodong Xu [this message]
2016-04-05 13:27 ` [PATCH v3 01/16] arm64: dts: Reserve memory regions for hi6220 Guodong Xu
2016-04-05 13:27 ` [PATCH v3 02/16] arm64: dts: add sp804 timer node for Hi6220 Guodong Xu
     [not found]   ` <1459862860-9775-3-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-04-08 12:17     ` Linus Walleij
2016-04-05 13:27 ` [PATCH v3 03/16] arm64: dts: enable idle states " Guodong Xu
2016-04-05 13:27 ` [PATCH v3 04/16] arm64: dts: Add Hi6220 gpio configuration nodes Guodong Xu
     [not found]   ` <1459862860-9775-5-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-04-08 12:19     ` Linus Walleij
2016-04-12  9:43       ` Guodong Xu
2016-04-05 13:27 ` [PATCH v3 05/16] arm64: dts: add Hi6220 pinctrl " Guodong Xu
2016-04-05 13:27 ` [PATCH v3 06/16] arm64: dts: add Hi6220 spi " Guodong Xu
2016-04-05 13:27 ` [PATCH v3 07/16] arm64: dts: add all hi6220 i2c nodes Guodong Xu
2016-04-05 13:27 ` [PATCH v3 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards Guodong Xu
2016-04-05 13:27 ` [PATCH v3 09/16] arm64: dts: add hi6220 usb node Guodong Xu
2016-04-05 13:27 ` [PATCH v3 10/16] arm64: dts: add mailbox node for Hi6220 Guodong Xu
2016-04-05 13:27 ` [PATCH v3 11/16] arm64: dts: add Hi6220's stub clock node Guodong Xu
2016-04-05 13:27 ` [PATCH v3 12/16] arm64: dts: hi6220: add pinctrl for uarts and enable them Guodong Xu
2016-04-05 13:27 ` [PATCH v3 13/16] arm64: dts: add LED nodes for hi6220-hikey Guodong Xu
2016-04-05 13:27 ` [PATCH v3 14/16] arm64: dts: hikey: Add hi655x pmic dts node Guodong Xu
2016-04-05 13:27 ` [PATCH v3 15/16] arm64: dts: add dwmmc nodes for hi6220 Guodong Xu
2016-04-05 13:27 ` [PATCH v3 16/16] arm64: dts: add wifi nodes support for hi6220-hikey Guodong Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459862860-9775-1-git-send-email-guodong.xu@linaro.org \
    --to=guodong.xu@linaro.org \
    --cc=arnd.bergmann@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=grant.likely@secretlab.ca \
    --cc=kong.kongxinwei@hisilicon.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh@kernel.org \
    --cc=xuwei5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).