devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	fcooper-l0cyMroinI0@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>,
	Teresa Remmet <t.remmet-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>,
	Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>,
	Yegor Yefremov
	<yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
	Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Enric Balletbo i Serra
	<eballetbo-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org>
Subject: [PATCH 12/13] ARM: dts: am335x: Provide NAND ready pin
Date: Thu, 7 Apr 2016 13:25:39 +0300	[thread overview]
Message-ID: <1460024740-19716-13-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1460024740-19716-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>

On these boards NAND ready pin status is avilable over
GPMC_WAIT0 pin.

For NAND we don't use GPMC wait pin monitoring but
get the NAND Ready/Busy# status using GPIOlib.
GPMC driver provides the WAIT0 pin status over GPIOlib.

Read speed increases from 7869 KiB/ to 8875 KiB/s
and write speed was unchanged at 5100 KiB/s.

Measured using mtd_speedtest.ko on am335x-evm.

Cc: Teresa Remmet <t.remmet-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
Cc: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
Cc: Yegor Yefremov <yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
Cc: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Enric Balletbo i Serra <eballetbo-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/am335x-baltos-ir5221.dts | 1 +
 arch/arm/boot/dts/am335x-chilisom.dtsi     | 1 +
 arch/arm/boot/dts/am335x-cm-t335.dts       | 1 +
 arch/arm/boot/dts/am335x-evm.dts           | 1 +
 arch/arm/boot/dts/am335x-igep0033.dtsi     | 1 +
 arch/arm/boot/dts/am335x-phycore-som.dtsi  | 1 +
 6 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 6c667fb..17e92e8 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -241,6 +241,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		ti,nand-xfer-type = "polled";
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 95461a2..e48c282 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -214,6 +214,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index e835644..817b1de 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -411,6 +411,7 @@ status = "okay";
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 28b9162..516673b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -524,6 +524,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 6c3a9bf..df63484 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -135,6 +135,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index d4b7f3b..86f7731 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -171,6 +171,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-nand = "true";
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-04-07 10:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-07 10:25 [PATCH 00/13] ARM: dts: OMAP2+: Enable gpio controller for GPMC and add NAND ready pin Roger Quadros
     [not found] ` <1460024740-19716-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2016-04-07 10:25   ` [PATCH 01/13] ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC Roger Quadros
2016-04-07 10:25   ` [PATCH 02/13] ARM: dts: omap4: " Roger Quadros
2016-04-07 10:25   ` [PATCH 03/13] ARM: dts: omap5: " Roger Quadros
2016-04-07 10:25   ` [PATCH 04/13] ARM: dts: dra7: Enable gpio " Roger Quadros
2016-04-07 10:25   ` [PATCH 05/13] ARM: dts: am335x: " Roger Quadros
2016-04-07 10:25   ` [PATCH 06/13] ARM: dts: am4372: " Roger Quadros
2016-04-07 10:25   ` [PATCH 07/13] ARM: dts: omap3: " Roger Quadros
2016-04-07 10:25   ` [PATCH 08/13] ARM: dts: dm814x: " Roger Quadros
2016-04-07 10:25   ` [PATCH 09/13] ARM: dts: dm816x: " Roger Quadros
2016-04-07 10:25   ` [PATCH 10/13] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros
2016-04-07 10:25   ` [PATCH 11/13] ARM: dts: am437x: " Roger Quadros
2016-04-07 10:25   ` Roger Quadros [this message]
2016-04-07 10:25   ` [PATCH 13/13] ARM: dts: omap3-beagle: " Roger Quadros
2016-04-12 21:28   ` [PATCH 00/13] ARM: dts: OMAP2+: Enable gpio controller for GPMC and add " Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460024740-19716-13-git-send-email-rogerq@ti.com \
    --to=rogerq-l0cymroini0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=eballetbo-VIneJrwqLopBDgjK7y7TUQ@public.gmane.org \
    --cc=fcooper-l0cyMroinI0@public.gmane.org \
    --cc=ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=t.remmet-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    --cc=yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).