From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org,
srinivas.kandagatla@linaro.org
Subject: [PATCH v2 00/13] ARM: dts: Add DB600c support.
Date: Tue, 12 Apr 2016 10:33:49 +0100 [thread overview]
Message-ID: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org> (raw)
Hi Andy,
This patchset adds support to DB600c which is based on APQ8064.
With this patchset, except spi I was able to test all the below features
on this board on top of v4.6-rc3.
1> i2c
2> spi
3> sd/mmc with card detect
4> eMMC
5> USB
6> SATA
7> on board Ethernet based on PCIE.
8> user and activity leds.
9> on board Magnetometer
This patchset also has a fix to i2c/spi pinctrls which was not set correctly
in my previous apq8064 patches, I have verified this patchset with eeprom and
sensors on the board, you might want to take that patch in next rc.
Changes since v1:
- renamed the dts and compatible strings according to the discussion.
- fixed/renamed led labels as suggeste by Rob, Nico and others.
- Added Acks for Bjorn
- Added Magnetometer support.
- Split the pinconfs to seperate file as suggested by Bjorn
- Remove activity leds default triggers, as it was not clear
which trigger was correct according to 96boards specs.
Can be added once we fix that.
Thanks,
srini
Srinivas Kandagatla (13):
ARM: dts: apq8064: fix the pinctrls for i2c and spi
ARM: dts: apq8064: add support to gsbi1 uart
ARM: dts: apq8064: add gsbi7 i2c support
ARM: dts: db600c: add board support with serial
ARM: dts: db600c: add pmic regulator supplies
ARM: dts: db600c: Add eMMC and SD card support
ARM: dts: db600c: add usb support
ARM: dts: db600c: add pcie support
ARM: dts: db600c: add on board sata support.
ARM: dts: db600c: Add on board leds support
ARM: dts: db600c: add i2c support
ARM: dts: db600c: add spi support
ARM: dts: db600c: add support to magnetometer
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 52 +++
arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 349 +++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++
arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++-
5 files changed, 476 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi
create mode 100644 arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
--
2.5.0
next reply other threads:[~2016-04-12 9:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-12 9:33 Srinivas Kandagatla [this message]
2016-04-12 9:33 ` [PATCH v2 01/13] ARM: dts: apq8064: fix the pinctrls for i2c and spi Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 03/13] ARM: dts: apq8064: add gsbi7 i2c support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 04/13] ARM: dts: db600c: add board support with serial Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies Srinivas Kandagatla
2016-04-19 19:10 ` Stephen Boyd
2016-04-22 9:11 ` Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 06/13] ARM: dts: db600c: Add eMMC and SD card support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 07/13] ARM: dts: db600c: add usb support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 08/13] ARM: dts: db600c: add pcie support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 09/13] ARM: dts: db600c: add on board sata support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 10/13] ARM: dts: db600c: Add on board leds support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 11/13] ARM: dts: db600c: add i2c support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 12/13] ARM: dts: db600c: add spi support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 13/13] ARM: dts: db600c: add support to magnetometer Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=andy.gross@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).