From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-soc@vger.kernel.org,
srinivas.kandagatla@linaro.org
Subject: [PATCH v2 04/13] ARM: dts: db600c: add board support with serial
Date: Tue, 12 Apr 2016 10:33:53 +0100 [thread overview]
Message-ID: <1460453642-5809-5-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch adds support to DB600c with basic serial ports.
DB600c is based on APQ8064.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 36 +++++++++++++++++++++++++
2 files changed, 37 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 95c1923..fef61b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -539,6 +539,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-arrow-db600c.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
new file mode 100644
index 0000000..57d4500
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
@@ -0,0 +1,36 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "Arrow Electronics, APQ8064 DB600c";
+ compatible = "arrow,db600c", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi7_serial;
+ serial1 = &gsbi1_serial;
+ };
+
+ soc {
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ serial@12450000 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi1_uart_4pins>;
+ };
+ };
+
+ /* DEBUG UART */
+ gsbi@16600000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
+ };
+ };
+ };
+};
--
2.5.0
next prev parent reply other threads:[~2016-04-12 9:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-12 9:33 [PATCH v2 00/13] ARM: dts: Add DB600c support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 01/13] ARM: dts: apq8064: fix the pinctrls for i2c and spi Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 03/13] ARM: dts: apq8064: add gsbi7 i2c support Srinivas Kandagatla
2016-04-12 9:33 ` Srinivas Kandagatla [this message]
2016-04-12 9:33 ` [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies Srinivas Kandagatla
2016-04-19 19:10 ` Stephen Boyd
2016-04-22 9:11 ` Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 06/13] ARM: dts: db600c: Add eMMC and SD card support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 07/13] ARM: dts: db600c: add usb support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 08/13] ARM: dts: db600c: add pcie support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 09/13] ARM: dts: db600c: add on board sata support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 10/13] ARM: dts: db600c: Add on board leds support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 11/13] ARM: dts: db600c: add i2c support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 12/13] ARM: dts: db600c: add spi support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 13/13] ARM: dts: db600c: add support to magnetometer Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460453642-5809-5-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=andy.gross@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).