From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, srinivas.kandagatla@linaro.org,
linux-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/13] ARM: dts: db600c: add usb support
Date: Tue, 12 Apr 2016 10:33:56 +0100 [thread overview]
Message-ID: <1460453642-5809-8-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1460453642-5809-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch adds usb host and otg support on board with required
regulators.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 64 +++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
index d921424..2c563df 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts
@@ -58,6 +58,12 @@
bias-pull-down;
};
+ s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -72,6 +78,18 @@
qcom,switch-mode-frequency = <3200000>;
};
+ l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
@@ -85,6 +103,12 @@
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
+
+ l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
};
};
@@ -111,6 +135,46 @@
};
};
+ /* OTG */
+ phy@12500000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb@12500000 {
+ status = "okay";
+ };
+
+ usb@12520000 {
+ status = "okay";
+ };
+
+ usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc@12400000 {
--
2.5.0
next prev parent reply other threads:[~2016-04-12 9:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-12 9:33 [PATCH v2 00/13] ARM: dts: Add DB600c support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 01/13] ARM: dts: apq8064: fix the pinctrls for i2c and spi Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 03/13] ARM: dts: apq8064: add gsbi7 i2c support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 04/13] ARM: dts: db600c: add board support with serial Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies Srinivas Kandagatla
2016-04-19 19:10 ` Stephen Boyd
2016-04-22 9:11 ` Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 06/13] ARM: dts: db600c: Add eMMC and SD card support Srinivas Kandagatla
2016-04-12 9:33 ` Srinivas Kandagatla [this message]
2016-04-12 9:33 ` [PATCH v2 08/13] ARM: dts: db600c: add pcie support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 09/13] ARM: dts: db600c: add on board sata support Srinivas Kandagatla
2016-04-12 9:33 ` [PATCH v2 10/13] ARM: dts: db600c: Add on board leds support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 11/13] ARM: dts: db600c: add i2c support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 12/13] ARM: dts: db600c: add spi support Srinivas Kandagatla
2016-04-12 9:34 ` [PATCH v2 13/13] ARM: dts: db600c: add support to magnetometer Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460453642-5809-8-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=andy.gross@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).