From: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
To: nsekhar-l0cyMroinI0@public.gmane.org,
khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 2/7] ASoC: Davinci: McBSP: add device tree support for McBSP
Date: Mon, 18 Apr 2016 14:32:41 +0200 [thread overview]
Message-ID: <1460982766-18632-3-git-send-email-petr@barix.com> (raw)
In-Reply-To: <1460982766-18632-1-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
This adds DT support for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx McBSP driver.
Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
---
v1: initial
v2: remove "-audio" postfix from the compatible string
of_match_table renamed consistently with the rest of the file (davinci_i2s_match)
"channel-combine" property removed
devicetree DMA configuration in probe simplified
v3: remove the unused platform data
sound/soc/davinci/Kconfig | 6 +++-
sound/soc/davinci/davinci-i2s.c | 80 +++++++++++++++++++++++++++--------------
2 files changed, 59 insertions(+), 27 deletions(-)
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index 50ca291cc225..6b732d8e5896 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -16,7 +16,11 @@ config SND_EDMA_SOC
- DRA7xx family
config SND_DAVINCI_SOC_I2S
- tristate
+ tristate "DaVinci Multichannel Buffered Serial Port (McBSP) support"
+ depends on SND_EDMA_SOC
+ help
+ Say Y or M here if you want to have support for McBSP IP found in
+ Texas Instruments DaVinci DA850 SoCs.
config SND_DAVINCI_SOC_MCASP
tristate "Multichannel Audio Serial Port (McASP) support"
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index ec98548a5fc9..384961651904 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -4,9 +4,15 @@
* Author: Vladimir Barinov, <vbarinov-L1vi/lXTdtvkgf6YlCu6wwC/G2K4zDHf@public.gmane.org>
* Copyright: (C) 2007 MontaVista Software, Inc., <source-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
*
+ * DT support (c) 2016 Petr Kulhavy, Barix AG <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
+ * based on davinci-mcasp.c DT support
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * TODO:
+ * on DA850 implement HW FIFOs instead of DMA into DXR and DRR registers
*/
#include <linux/init.h>
@@ -650,13 +656,24 @@ static const struct snd_soc_component_driver davinci_i2s_component = {
static int davinci_i2s_probe(struct platform_device *pdev)
{
+ struct snd_dmaengine_dai_dma_data *dma_data;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *res;
void __iomem *io_base;
int *dma;
int ret;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
+ if (!mem) {
+ dev_warn(&pdev->dev,
+ "\"mpu\" mem resource not found, using index 0\n");
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -ENODEV;
+ }
+ }
+
io_base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(io_base))
return PTR_ERR(io_base);
@@ -666,39 +683,43 @@ static int davinci_i2s_probe(struct platform_device *pdev)
if (!dev)
return -ENOMEM;
- dev->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(dev->clk))
- return -ENODEV;
- clk_enable(dev->clk);
-
dev->base = io_base;
- dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
- (dma_addr_t)(mem->start + DAVINCI_MCBSP_DXR_REG);
+ /* setup DMA, first TX, then RX */
+ dma_data = &dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK];
+ dma_data->addr = (dma_addr_t)(mem->start + DAVINCI_MCBSP_DXR_REG);
- dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
- (dma_addr_t)(mem->start + DAVINCI_MCBSP_DRR_REG);
-
- /* first TX, then RX */
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!res) {
- dev_err(&pdev->dev, "no DMA resource\n");
- ret = -ENXIO;
- goto err_release_clk;
+ if (res) {
+ dma = &dev->dma_request[SNDRV_PCM_STREAM_PLAYBACK];
+ *dma = res->start;
+ dma_data->filter_data = dma;
+ } else if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ dma_data->filter_data = "tx";
+ } else {
+ dev_err(&pdev->dev, "Missing DMA tx resource\n");
+ return -ENODEV;
}
- dma = &dev->dma_request[SNDRV_PCM_STREAM_PLAYBACK];
- *dma = res->start;
- dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].filter_data = dma;
+
+ dma_data = &dev->dma_data[SNDRV_PCM_STREAM_CAPTURE];
+ dma_data->addr = (dma_addr_t)(mem->start + DAVINCI_MCBSP_DRR_REG);
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!res) {
- dev_err(&pdev->dev, "no DMA resource\n");
- ret = -ENXIO;
- goto err_release_clk;
+ if (res) {
+ dma = &dev->dma_request[SNDRV_PCM_STREAM_CAPTURE];
+ *dma = res->start;
+ dma_data->filter_data = dma;
+ } else if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ dma_data->filter_data = "rx";
+ } else {
+ dev_err(&pdev->dev, "Missing DMA rx resource\n");
+ return -ENODEV;
}
- dma = &dev->dma_request[SNDRV_PCM_STREAM_CAPTURE];
- *dma = res->start;
- dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].filter_data = dma;
+
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return -ENODEV;
+ clk_enable(dev->clk);
dev->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, dev);
@@ -737,11 +758,18 @@ static int davinci_i2s_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id davinci_i2s_match[] = {
+ { .compatible = "ti,da850-mcbsp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, davinci_i2s_match);
+
static struct platform_driver davinci_mcbsp_driver = {
.probe = davinci_i2s_probe,
.remove = davinci_i2s_remove,
.driver = {
.name = "davinci-mcbsp",
+ .of_match_table = of_match_ptr(davinci_i2s_match),
},
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-04-18 12:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-18 12:32 [PATCH v3 0/7] ASoC: davinci-mcbsp: add binding for McBSP Petr Kulhavy
[not found] ` <1460982766-18632-1-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-18 12:32 ` [PATCH v3 1/7] " Petr Kulhavy
[not found] ` <1460982766-18632-2-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-20 6:49 ` Geert Uytterhoeven
2016-04-22 8:33 ` Petr Kulhavy
2016-04-18 12:32 ` Petr Kulhavy [this message]
2016-04-18 12:32 ` [PATCH v3 3/7] ARM: davinci: da850: add clocks for mcbsp0 and 1 Petr Kulhavy
2016-04-18 12:32 ` [PATCH v3 4/7] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entries for mcbsp0 and mcbsp1 Petr Kulhavy
2016-04-18 12:32 ` [PATCH v3 5/7] ARM: DTS: da850: Fix wrong number of interrupts Petr Kulhavy
2016-04-18 12:32 ` [PATCH v3 6/7] ARM: DTS: da850: Add McBSP0 and McBSP1 Petr Kulhavy
2016-04-18 12:32 ` [PATCH v3 7/7] ARM: davinci: remove unused davinci-i2s pdata Petr Kulhavy
2016-04-18 13:06 ` [PATCH v3 0/7] ASoC: davinci-mcbsp: add binding for McBSP Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460982766-18632-3-git-send-email-petr@barix.com \
--to=petr-qh/3xlp0evwavxtiumwx3w@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).