devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-pm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 01/12] arm64: dts: r8a7795: Add SYSC PM Domains
Date: Fri, 22 Apr 2016 11:07:23 +0200	[thread overview]
Message-ID: <1461316054-27999-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1461316054-27999-1-git-send-email-geert+renesas@glider.be>

Add a device node for the System Controller.
Hook up the Cortex-A57 CPU cores and the Cortex-A57 and Cortex A53 L2
caches/SCUs to their respective PM Domains.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
  - Add Acked-by,

v5:
  - Remove "power-domains" property again from the sysc node, as the
    System Controller itself is not part of the Clock Domain,

v4:
  - Add "power-domains" property to the sysc node, to refer to the SoC's
    Clock Domain,
  - Extract using "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the
    always-on power area into a separate patch,

v3:
  - Drop power area hiearchy from DT,
  - Switch to "#power-domain-cells = <1>",
  - Use "<&sysc R8A7795_PD_ALWAYS_ON>" for devices in the always-on
    power area,
  - Drop fallback compatibility strings,

v2:
  - New.
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 11f9971a85433b7f..9c7424fc171fb876 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -10,6 +10,7 @@
 
 #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
 
 / {
 	compatible = "renesas,r8a7795";
@@ -39,6 +40,7 @@
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0x0>;
 			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
@@ -47,6 +49,7 @@
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x1>;
 			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
@@ -54,6 +57,7 @@
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x2>;
 			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
@@ -61,6 +65,7 @@
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x3>;
 			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
@@ -68,12 +73,14 @@
 
 	L2_CA57: cache-controller@0 {
 		compatible = "cache";
+		power-domains = <&sysc R8A7795_PD_CA57_SCU>;
 		cache-unified;
 		cache-level = <2>;
 	};
 
 	L2_CA53: cache-controller@1 {
 		compatible = "cache";
+		power-domains = <&sysc R8A7795_PD_CA53_SCU>;
 		cache-unified;
 		cache-level = <2>;
 	};
@@ -305,6 +312,12 @@
 			#power-domain-cells = <0>;
 		};
 
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7795-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-- 
1.9.1

  reply	other threads:[~2016-04-22  9:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-22  9:07 [PATCH v6 00/12] ARM/arm64: dts: rcar: Add SYSC PM domains Geert Uytterhoeven
2016-04-22  9:07 ` Geert Uytterhoeven [this message]
2016-04-22  9:07 ` [PATCH v6 02/12] arm64: dts: r8a7795: Use SYSC "always-on" PM Domain Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 03/12] ARM: dts: r8a7779: Add SYSC PM Domains Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 04/12] ARM: dts: r8a7790: " Geert Uytterhoeven
     [not found] ` <1461316054-27999-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-04-22  9:07   ` [PATCH v6 05/12] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 06/12] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 07/12] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 08/12] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 09/12] ARM: dts: r8a7790: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 10/12] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 11/12] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-04-22  9:07 ` [PATCH v6 12/12] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-04-22 10:45 ` [PATCH v6 00/12] ARM/arm64: dts: rcar: Add SYSC PM domains Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461316054-27999-2-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).