From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v6 02/12] arm64: dts: r8a7795: Use SYSC "always-on" PM Domain
Date: Fri, 22 Apr 2016 11:07:24 +0200 [thread overview]
Message-ID: <1461316054-27999-3-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1461316054-27999-1-git-send-email-geert+renesas@glider.be>
Hook up all devices that are part of the CPG/MSSR Clock Domain to the
SYSC "always-on" PM Domain, for a more consistent device-power-area
description in DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v6:
- No changes,
v5:
- Add Acked-by,
v4:
- New, extracted from "[PATCH v3] arm64: dts: r8a7795: Add SYSC PM
Domains",
- Use "<&sysc R8A7795_PD_ALWAYS_ON>" for recently added can0, can1,
pciec0, and pciec1 device nodes,
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 110 +++++++++++++++----------------
1 file changed, 55 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 9c7424fc171fb876..1e0f43e72bf0eb80 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -178,7 +178,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
@@ -192,7 +192,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
@@ -206,7 +206,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
@@ -220,7 +220,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
@@ -234,7 +234,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
@@ -248,7 +248,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
@@ -262,7 +262,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
@@ -276,7 +276,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
pmu_a57 {
@@ -345,7 +345,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -377,7 +377,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -399,7 +399,7 @@
GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
dmac0: dma-controller@e6700000 {
@@ -430,7 +430,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -463,7 +463,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -496,7 +496,7 @@
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -538,7 +538,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
phy-mode = "rgmii-id";
#address-cells = <1>;
#size-cells = <0>;
@@ -555,7 +555,7 @@
clock-names = "clkp1", "clkp2", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -570,7 +570,7 @@
clock-names = "clkp1", "clkp2", "can_clk";
assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
assigned-clock-rates = <40000000>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -586,7 +586,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -602,7 +602,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -618,7 +618,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -634,7 +634,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -650,7 +650,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -665,7 +665,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -680,7 +680,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -695,7 +695,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -710,7 +710,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -725,7 +725,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -740,7 +740,7 @@
clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -751,7 +751,7 @@
reg = <0 0xe6500000 0 0x40>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -763,7 +763,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -775,7 +775,7 @@
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -787,7 +787,7 @@
reg = <0 0xe66d0000 0 0x40>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -799,7 +799,7 @@
reg = <0 0xe66d8000 0 0x40>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -811,7 +811,7 @@
reg = <0 0xe66e0000 0 0x40>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -823,7 +823,7 @@
reg = <0 0xe66e8000 0 0x40>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -873,7 +873,7 @@
"src.1", "src.0",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
rcar_sound,dvc {
@@ -1007,7 +1007,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1016,7 +1016,7 @@
reg = <0 0xee040000 0 0xc00>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 327>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1028,7 +1028,7 @@
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1041,7 +1041,7 @@
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -1051,7 +1051,7 @@
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1060,7 +1060,7 @@
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1069,7 +1069,7 @@
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 312>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@@ -1079,7 +1079,7 @@
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@@ -1089,7 +1089,7 @@
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1098,7 +1098,7 @@
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1107,7 +1107,7 @@
compatible = "renesas,usb2-phy-r8a7795";
reg = <0 0xee0c0200 0 0x700>;
clocks = <&cpg CPG_MOD 701>;
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1119,7 +1119,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1130,7 +1130,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1141,7 +1141,7 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1152,7 +1152,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1163,7 +1163,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1174,7 +1174,7 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
pciec0: pcie@fe000000 {
@@ -1198,7 +1198,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@@ -1223,7 +1223,7 @@
interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
- power-domains = <&cpg>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
};
--
1.9.1
next prev parent reply other threads:[~2016-04-22 9:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 9:07 [PATCH v6 00/12] ARM/arm64: dts: rcar: Add SYSC PM domains Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 01/12] arm64: dts: r8a7795: Add SYSC PM Domains Geert Uytterhoeven
2016-04-22 9:07 ` Geert Uytterhoeven [this message]
2016-04-22 9:07 ` [PATCH v6 03/12] ARM: dts: r8a7779: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 04/12] ARM: dts: r8a7790: " Geert Uytterhoeven
[not found] ` <1461316054-27999-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-04-22 9:07 ` [PATCH v6 05/12] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 06/12] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 07/12] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 08/12] ARM: dts: r8a7779: Use SYSC "always-on" PM Domain Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 09/12] ARM: dts: r8a7790: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 10/12] ARM: dts: r8a7791: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 11/12] ARM: dts: r8a7793: " Geert Uytterhoeven
2016-04-22 9:07 ` [PATCH v6 12/12] ARM: dts: r8a7794: " Geert Uytterhoeven
2016-04-22 10:45 ` [PATCH v6 00/12] ARM/arm64: dts: rcar: Add SYSC PM domains Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461316054-27999-3-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).