[PATCH 09/11] mfd: altr_a10sr: Add Altera A10-SR power supply alarms

[<tthayer@opensource.altera.com>]

From: Thor Thayer <tthayer@opensource.altera.com>

Add support for power supply alarms to the Altera Arria10
Development Kit System Resource chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/mfd/altera-a10sr.c       |    4 ++++
 include/linux/mfd/altera-a10sr.h |   24 ++++++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/mfd/altera-a10sr.c b/drivers/mfd/altera-a10sr.c
index 2ff08e3..2b2a90c 100644
--- a/drivers/mfd/altera-a10sr.c
+++ b/drivers/mfd/altera-a10sr.c
@@ -31,6 +31,10 @@ static const struct mfd_cell altr_a10sr_subdev_info[] = {
 		.name = "altr_a10sr_gpio",
 		.of_compatible = "altr,a10sr-gpio",
 	},
+	{
+		.name = "altr_a10sr_hwmon",
+		.of_compatible = "altr,a10sr-hwmon",
+	},
 };
 
 static bool altr_a10sr_reg_readable(struct device *dev, unsigned int reg)
diff --git a/include/linux/mfd/altera-a10sr.h b/include/linux/mfd/altera-a10sr.h
index c869fe7..22aa830 100644
--- a/include/linux/mfd/altera-a10sr.h
+++ b/include/linux/mfd/altera-a10sr.h
@@ -62,8 +62,32 @@
 #define ALTR_A10SR_IN_VALID_RANGE_HI      15
 
 #define ALTR_A10SR_PWR_GOOD1_REG      0x08    /* Power Good1 Read */
+/* Power Good #1 Register Bit Definitions */
+#define ALTR_A10SR_PG1_OP_FLAG_SHIFT    7       /* Power On Complete */
+#define ALTR_A10SR_PG1_1V8_SHIFT        6       /* 1.8V Power Good */
+#define ALTR_A10SR_PG1_2V5_SHIFT        5       /* 2.5V Power Good */
+#define ALTR_A10SR_PG1_3V3_SHIFT        4       /* 3.3V Power Good */
+#define ALTR_A10SR_PG1_5V0_SHIFT        3       /* 5.0V Power Good */
+#define ALTR_A10SR_PG1_0V9_SHIFT        2       /* 0.9V Power Good */
+#define ALTR_A10SR_PG1_0V95_SHIFT       1       /* 0.95V Power Good */
+#define ALTR_A10SR_PG1_1V0_SHIFT        0       /* 1.0V Power Good */
+
 #define ALTR_A10SR_PWR_GOOD2_REG      0x0A    /* Power Good2 Read */
+/* Power Good #2 Register Bit Definitions */
+#define ALTR_A10SR_PG2_HPS_SHIFT        7       /* HPS Power Good */
+#define ALTR_A10SR_PG2_HL_HPS_SHIFT     6       /* HILOHPS_VDD Power Good */
+#define ALTR_A10SR_PG2_HL_VDD_SHIFT     5       /* HILO VDD Power Good */
+#define ALTR_A10SR_PG2_HL_VDDQ_SHIFT    4       /* HILO VDDQ Power Good */
+#define ALTR_A10SR_PG2_FMCAVADJ_SHIFT   3       /* FMCA VADJ Power Good */
+#define ALTR_A10SR_PG2_FMCBVADJ_SHIFT   2       /* FMCB VADJ Power Good */
+#define ALTR_A10SR_PG2_FAC2MP_SHIFT     1       /* FAC2MP Power Good */
+#define ALTR_A10SR_PG2_FBC2MP_SHIFT     0       /* FBC2MP Power Good */
+
 #define ALTR_A10SR_PWR_GOOD3_REG      0x0C    /* Power Good3 Read */
+/* Power Good #3 Register Bit Definitions */
+#define ALTR_A10SR_PG3_FAM2C_SHIFT      7       /* FAM2C Power Good */
+#define ALTR_A10SR_PG3_10V_FAIL_SHIFT   6       /* 10V Fail n */
+
 #define ALTR_A10SR_FMCAB_REG          0x0E    /* FMCA/B & PCIe Pwr Enable */
 #define ALTR_A10SR_HPS_RST_REG        0x10    /* HPS Reset */
 #define ALTR_A10SR_USB_QSPI_REG       0x12    /* USB, BQSPI, FILE Reset */
-- 
1.7.9.5