From: Franklin S Cooper Jr <fcooper@ti.com>
To: thierry.reding@gmail.com, tony@atomide.com, paul@pwsan.com,
t-kristo@ti.com, linux-pwm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
robh+dt@kernel.org, devicetree@vger.kernel.org, vigneshr@ti.com,
nsekhar@ti.com
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Subject: [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
Date: Fri, 22 Apr 2016 11:40:36 -0500 [thread overview]
Message-ID: <1461343238-29274-6-git-send-email-fcooper@ti.com> (raw)
In-Reply-To: <1461343238-29274-1-git-send-email-fcooper@ti.com>
Previous patches switched the ECAP and EPWM to use the new bindings.
These bindings explicitly adds the various required clocks via DT rather
than depending on hwmod.
Therefore, it is safe to remove the hwmod entries since they are no longer
needed.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 3 ---
Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 3 ---
arch/arm/boot/dts/am33xx.dtsi | 6 ------
arch/arm/boot/dts/am4372.dtsi | 9 ---------
4 files changed, 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 5c7a116..39277b6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
- "ecap<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the ECAP's functional clock.
- clock-names: Must be set to "fck".
@@ -21,7 +19,6 @@ ecap0: ecap@0 { /* ECAP on am33xx */
compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index a82e249..ac1eae6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -10,8 +10,6 @@ Required properties:
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
- "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
- clocks: Handle to the PWM's time-base and functional clock.
- clock-names: Must be set to "tbclk" and "fck".
@@ -23,7 +21,6 @@ ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
reg = <0x48300200 0x100>;
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 999ba2f..2661acc 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -687,7 +687,6 @@
clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
- ti,hwmods = "ecap0";
status = "disabled";
};
@@ -696,7 +695,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -723,7 +721,6 @@
clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
- ti,hwmods = "ecap1";
status = "disabled";
};
@@ -732,7 +729,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -759,7 +755,6 @@
clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -768,7 +763,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index e858460..cfdd4b7 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -677,7 +677,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -689,7 +688,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -711,7 +709,6 @@
"ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
- ti,hwmods = "ecap1";
clocks = <&l4ls_gclk>;
clock-names = "fck";
status = "disabled";
@@ -723,7 +720,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -747,7 +743,6 @@
reg = <0x48304100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- ti,hwmods = "ecap2";
status = "disabled";
};
@@ -757,7 +752,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -779,7 +773,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
- ti,hwmods = "ehrpwm3";
clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -801,7 +794,6 @@
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
- ti,hwmods = "ehrpwm4";
clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
status = "disabled";
@@ -825,7 +817,6 @@
reg = <0x4830a200 0x80>;
clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
clock-names = "tbclk", "fck";
- ti,hwmods = "ehrpwm5";
status = "disabled";
};
};
--
2.7.0
next prev parent reply other threads:[~2016-04-22 16:40 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 16:40 [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin S Cooper Jr
2016-04-22 16:40 ` [PATCH v6 1/7] clk: ti: am335x/am4372: Add tbclk to pwm node Franklin S Cooper Jr
2016-04-22 16:40 ` [PATCH v6 2/7] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name Franklin S Cooper Jr
2016-04-22 16:40 ` [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings Franklin S Cooper Jr
2016-04-25 13:03 ` Rob Herring
2016-04-26 13:22 ` Franklin S Cooper Jr.
2016-04-22 16:40 ` [PATCH v6 4/7] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings Franklin S Cooper Jr
2016-04-22 16:40 ` Franklin S Cooper Jr [this message]
2016-04-25 13:04 ` [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes Rob Herring
2016-04-22 16:40 ` [PATCH v6 6/7] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries Franklin S Cooper Jr
2016-04-22 16:40 ` [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin S Cooper Jr
[not found] ` <1461343238-29274-8-git-send-email-fcooper-l0cyMroinI0@public.gmane.org>
2016-04-25 13:05 ` Rob Herring
2016-04-25 16:18 ` [PATCH v6 0/7] " Paul Walmsley
2016-04-26 13:22 ` Franklin S Cooper Jr.
2016-04-26 14:27 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461343238-29274-6-git-send-email-fcooper@ti.com \
--to=fcooper@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).