From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Engestrom Subject: [PATCH 11/41] Documentation: dt: dma: fix spelling mistake Date: Mon, 25 Apr 2016 01:24:08 +0100 Message-ID: <1461543878-3639-12-git-send-email-eric@engestrom.ch> References: <1461543878-3639-1-git-send-email-eric@engestrom.ch> Return-path: In-Reply-To: <1461543878-3639-1-git-send-email-eric@engestrom.ch> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Eric Engestrom , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Michal Simek , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Signed-off-by: Eric Engestrom --- Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index 2291c40..3cf0072d 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt @@ -7,7 +7,7 @@ Required properties: - compatible: Should be "xlnx,axi-dma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain DMA registers location and length. -- dma-channel child node: Should have atleast one channel and can have upto +- dma-channel child node: Should have at least one channel and can have up to two channels per device. This node specifies the properties of each DMA channel (see child node properties below). -- 2.8.0