[PATCH 07/41] Documentation: dt: arc: fix spelling mistakes

[PATCH 07/41] Documentation: dt: arc: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/arc/archs-pct.txt | 2 +-
 Documentation/devicetree/bindings/arc/pct.txt       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
index 1ae98b87..e4b9dce 100644
--- a/Documentation/devicetree/bindings/arc/archs-pct.txt
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -2,7 +2,7 @@
 
 The ARC HS can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters.
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
 It also supports overflow interrupts.
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt
index 7b95884..4e874d9 100644
--- a/Documentation/devicetree/bindings/arc/pct.txt
+++ b/Documentation/devicetree/bindings/arc/pct.txt
@@ -2,7 +2,7 @@
 
 The ARC700 can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters
+are 100+ hardware conditions dynamically mapped to up to 32 counters
 
 Note that:
  * The ARC 700 PCT does not support interrupts; although HW events may be
-- 
2.8.0

Re: [PATCH 07/41] Documentation: dt: arc: fix spelling mistakes

[Vineet Gupta]

On Monday 25 April 2016 05:54 AM, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Thx Eric.

Applied to ARC for-curr !

-Vineet

[PATCH 08/41] Documentation: dt: arm: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/arm/cci.txt        | 2 +-
 Documentation/devicetree/bindings/arm/spear-misc.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index a1a5a7e..0f2153e 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -100,7 +100,7 @@ specific to ARM.
 				 "arm,cci-400-pmu,r0"
 				 "arm,cci-400-pmu,r1"
 				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
-						      secure acces to CCI registers
+						      secure access to CCI registers
 				 "arm,cci-500-pmu,r0"
 				 "arm,cci-550-pmu,r0"
 		- reg:
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
index cf64982..e404e25 100644
--- a/Documentation/devicetree/bindings/arm/spear-misc.txt
+++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
@@ -6,4 +6,4 @@ few properties of different peripheral controllers.
 misc node required properties:
 
 - compatible Should be	"st,spear1340-misc", "syscon".
-- reg: Address range of misc space upto 8K
+- reg: Address range of misc space up to 8K
-- 
2.8.0

Re: [PATCH 08/41] Documentation: dt: arm: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:05AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/arm/cci.txt        | 2 +-
>  Documentation/devicetree/bindings/arm/spear-misc.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
> index a1a5a7e..0f2153e 100644
> --- a/Documentation/devicetree/bindings/arm/cci.txt
> +++ b/Documentation/devicetree/bindings/arm/cci.txt
> @@ -100,7 +100,7 @@ specific to ARM.
>  				 "arm,cci-400-pmu,r0"
>  				 "arm,cci-400-pmu,r1"
>  				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
> -						      secure acces to CCI registers
> +						      secure access to CCI registers
>  				 "arm,cci-500-pmu,r0"
>  				 "arm,cci-550-pmu,r0"
>  		- reg:
> diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
> index cf64982..e404e25 100644
> --- a/Documentation/devicetree/bindings/arm/spear-misc.txt
> +++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
> @@ -6,4 +6,4 @@ few properties of different peripheral controllers.
>  misc node required properties:
>  
>  - compatible Should be	"st,spear1340-misc", "syscon".
> -- reg: Address range of misc space upto 8K
> +- reg: Address range of misc space up to 8K
> -- 
> 2.8.0
> 

[PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt | 2 +-
 Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt | 2 +-
 Documentation/devicetree/bindings/clock/st/st,clkgen.txt        | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
index 0c2bf5e..7f36853 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
@@ -16,7 +16,7 @@ Required Properties:
 Optional Properties:
 
 - rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changable, due to the missing pll lock status.
+  If missing pll rates are not changeable, due to the missing pll lock status.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
index c9fbb76..8cb47c3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
@@ -15,7 +15,7 @@ Required Properties:
 Optional Properties:
 
 - rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changable, due to the missing pll lock status.
+  If missing pll rates are not changeable, due to the missing pll lock status.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 78978f1..426bdda 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -40,7 +40,7 @@ address is common of all subnode.
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[7]
+Each subnode should use the binding describe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
-- 
2.8.0

Re: [PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

[Randy Dunlap]

On 04/24/16 17:24, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/st/st,clkgen.txt        | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> index 0c2bf5e..7f36853 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> @@ -16,7 +16,7 @@ Required Properties:
>  Optional Properties:
>  
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock status.
> +  If missing pll rates are not changeable, due to the missing pll lock status.
>  
>  Each clock is assigned an identifier and client nodes can use this identifier
>  to specify the clock which they consume. All available clocks are defined as
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> index c9fbb76..8cb47c3 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> @@ -15,7 +15,7 @@ Required Properties:
>  Optional Properties:
>  
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock status.
> +  If missing pll rates are not changeable, due to the missing pll lock status.
>  
>  Each clock is assigned an identifier and client nodes can use this identifier
>  to specify the clock which they consume. All available clocks are defined as
> diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> index 78978f1..426bdda 100644
> --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
> @@ -40,7 +40,7 @@ address is common of all subnode.
>  	};
>  
>  This binding uses the common clock binding[1].
> -Each subnode should use the binding discribe in [2]..[7]
> +Each subnode should use the binding describe in [2]..[7]

described ?

>  
>  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>  [2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
> 


-- 
~Randy

Re: [PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

[Heiko Stübner]

Am Montag, 25. April 2016, 01:24:06 schrieb Eric Engestrom:
> Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt | 2 +-
>  Documentation/devicetree/bindings/clock/st/st,clkgen.txt        | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt index
> 0c2bf5e..7f36853 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
> @@ -16,7 +16,7 @@ Required Properties:
>  Optional Properties:
> 
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock
> status. +  If missing pll rates are not changeable, due to the missing pll
> lock status.
> 
>  Each clock is assigned an identifier and client nodes can use this
> identifier to specify the clock which they consume. All available clocks
> are defined as diff --git
> a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt index
> c9fbb76..8cb47c3 100644
> --- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
> @@ -15,7 +15,7 @@ Required Properties:
>  Optional Properties:
> 
>  - rockchip,grf: phandle to the syscon managing the "general register files"
> -  If missing pll rates are not changable, due to the missing pll lock
> status. +  If missing pll rates are not changeable, due to the missing pll
> lock status.
> 
>  Each clock is assigned an identifier and client nodes can use this
> identifier to specify the clock which they consume. All available clocks
> are defined as

For the Rockchip parts
Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 09/41] Documentation: dt: clock: fix spelling mistakes

[Rob Herring]

On Sun, Apr 24, 2016 at 7:24 PM, Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org> wrote:
> Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
> ---

Applied with Randy's fix.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 10/41] Documentation: dt: display: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 22756b3..a782659 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -41,7 +41,7 @@ Video interfaces:
   endpoint node connected from mic node (reg = 0):
     - remote-endpoint: specifies the endpoint in mic node. This node is required
 		       for Exynos5433 mipi dsi. So mic can access to panel node
-		       thoughout this dsi node.
+		       throughout this dsi node.
   endpoint node connected to panel node (reg = 1):
     - remote-endpoint: specifies the endpoint in panel node. This node is
 		       required in all kinds of exynos mipi dsi to represent
-- 
2.8.0

Re: [PATCH 10/41] Documentation: dt: display: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:07AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> index 22756b3..a782659 100644
> --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
> @@ -41,7 +41,7 @@ Video interfaces:
>    endpoint node connected from mic node (reg = 0):
>      - remote-endpoint: specifies the endpoint in mic node. This node is required
>  		       for Exynos5433 mipi dsi. So mic can access to panel node
> -		       thoughout this dsi node.
> +		       throughout this dsi node.
>    endpoint node connected to panel node (reg = 1):
>      - remote-endpoint: specifies the endpoint in panel node. This node is
>  		       required in all kinds of exynos mipi dsi to represent
> -- 
> 2.8.0
> 

[PATCH 11/41] Documentation: dt: dma: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 2291c40..3cf0072d 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -7,7 +7,7 @@ Required properties:
 - compatible: Should be "xlnx,axi-dma-1.00.a"
 - #dma-cells: Should be <1>, see "dmas" property below
 - reg: Should contain DMA registers location and length.
-- dma-channel child node: Should have atleast one channel and can have upto
+- dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
 
-- 
2.8.0

Re: [PATCH 11/41] Documentation: dt: dma: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:08AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> index 2291c40..3cf0072d 100644
> --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
> @@ -7,7 +7,7 @@ Required properties:
>  - compatible: Should be "xlnx,axi-dma-1.00.a"
>  - #dma-cells: Should be <1>, see "dmas" property below
>  - reg: Should contain DMA registers location and length.
> -- dma-channel child node: Should have atleast one channel and can have upto
> +- dma-channel child node: Should have at least one channel and can have up to
>  	two channels per device. This node specifies the properties of each
>  	DMA channel (see child node properties below).
>  
> -- 
> 2.8.0
> 

[PATCH 12/41] Documentation: dt: input: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/input/ads7846.txt                  | 2 +-
 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
index c6cfe2e..9fc47b0 100644
--- a/Documentation/devicetree/bindings/input/ads7846.txt
+++ b/Documentation/devicetree/bindings/input/ads7846.txt
@@ -29,7 +29,7 @@ Optional properties:
 	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
 					external vref (u16).
 	ti,vref-mv			The VREF voltage, in millivolts (u16).
-					Set to 0 to use internal refernce
+					Set to 0 to use internal references
 					(ADS7846).
 	ti,keep-vref-on			set to keep vref on for differential
 					measurements as well
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
index cdf05f9..abfcab3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -15,7 +15,7 @@ Optional properties:
  - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
  - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
    between 1 and 4096. It is the ratio between the internal reference voltage
-   and the measured voltage after the plate was precharged. Resistence between
+   and the measured voltage after the plate was precharged. Resistance between
    plates and therefore the voltage decreases with pressure so that a smaller
    value is equivalent to a higher pressure.
  - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
-- 
2.8.0

Re: [PATCH 12/41] Documentation: dt: input: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/input/ads7846.txt                  | 2 +-
>  Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
> index c6cfe2e..9fc47b0 100644
> --- a/Documentation/devicetree/bindings/input/ads7846.txt
> +++ b/Documentation/devicetree/bindings/input/ads7846.txt
> @@ -29,7 +29,7 @@ Optional properties:
>  	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
>  					external vref (u16).
>  	ti,vref-mv			The VREF voltage, in millivolts (u16).
> -					Set to 0 to use internal refernce
> +					Set to 0 to use internal references
>  					(ADS7846).
>  	ti,keep-vref-on			set to keep vref on for differential
>  					measurements as well
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> index cdf05f9..abfcab3 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> @@ -15,7 +15,7 @@ Optional properties:
>   - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
>   - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
>     between 1 and 4096. It is the ratio between the internal reference voltage
> -   and the measured voltage after the plate was precharged. Resistence between
> +   and the measured voltage after the plate was precharged. Resistance between
>     plates and therefore the voltage decreases with pressure so that a smaller
>     value is equivalent to a higher pressure.
>   - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
> -- 
> 2.8.0
> 

[PATCH 13/41] Documentation: dt: interrupt-controller: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 .../devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu       | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
index 43effa0..18d4f40 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -4,7 +4,7 @@ All TI OMAP4/5 (and their derivatives) an interrupt controller that
 routes interrupts to the GIC, and also serves as a wakeup source. It
 is also referred to as "WUGEN-MPU", hence the name of the binding.
 
-Reguired properties:
+Required properties:
 
 - compatible : should contain at least "ti,omap4-wugen-mpu" or
   "ti,omap5-wugen-mpu"
@@ -20,7 +20,7 @@ Notes:
 - Because this HW ultimately routes interrupts to the GIC, the
   interrupt specifier must be that of the GIC.
 - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
-  are explicitly forbiden.
+  are explicitly forbidden.
 
 Example:
 
-- 
2.8.0

Re: [PATCH 13/41] Documentation: dt: interrupt-controller: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:10AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>

Applied, thanks.

Rob

> ---
>  .../devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu       | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> index 43effa0..18d4f40 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
> @@ -4,7 +4,7 @@ All TI OMAP4/5 (and their derivatives) an interrupt controller that
>  routes interrupts to the GIC, and also serves as a wakeup source. It
>  is also referred to as "WUGEN-MPU", hence the name of the binding.
>  
> -Reguired properties:
> +Required properties:
>  
>  - compatible : should contain at least "ti,omap4-wugen-mpu" or
>    "ti,omap5-wugen-mpu"
> @@ -20,7 +20,7 @@ Notes:
>  - Because this HW ultimately routes interrupts to the GIC, the
>    interrupt specifier must be that of the GIC.
>  - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
> -  are explicitly forbiden.
> +  are explicitly forbidden.
>  
>  Example:
>  
> -- 
> 2.8.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 14/41] Documentation: dt: media: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/media/xilinx/video.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
index cbd46fa..68ac210 100644
--- a/Documentation/devicetree/bindings/media/xilinx/video.txt
+++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
@@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores.
 - xlnx,video-format: This property represents a video format transmitted on an
   AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
   Video IP and System Design Guide" [UG934]. How the format relates to the IP
-  core is decribed in the IP core bindings documentation.
+  core is described in the IP core bindings documentation.
 
 - xlnx,video-width: This property qualifies the video format with the sample
   width expressed as a number of bits per pixel component. All components must
-- 
2.8.0

Re: [PATCH 14/41] Documentation: dt: media: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:11AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/media/xilinx/video.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
> index cbd46fa..68ac210 100644
> --- a/Documentation/devicetree/bindings/media/xilinx/video.txt
> +++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
> @@ -20,7 +20,7 @@ The following properties are common to all Xilinx video IP cores.
>  - xlnx,video-format: This property represents a video format transmitted on an
>    AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
>    Video IP and System Design Guide" [UG934]. How the format relates to the IP
> -  core is decribed in the IP core bindings documentation.
> +  core is described in the IP core bindings documentation.
>  
>  - xlnx,video-width: This property qualifies the video format with the sample
>    width expressed as a number of bits per pixel component. All components must
> -- 
> 2.8.0
> 

[PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 5e97a95..b98b291 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -178,7 +178,7 @@ see regulator.txt - with additional custom properties described below:
 - qcom,force-mode:
 	Usage: optional (default if no other qcom,force-mode is specified)
 	Value type: <u32>
-	Defintion: indicates that the regulator should be forced to a
+	Definition: indicates that the regulator should be forced to a
 		   particular mode, valid values are:
 		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
 		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
@@ -204,7 +204,7 @@ see regulator.txt - with additional custom properties described below:
 - qcom,force-mode:
 	Usage: optional
 	Value type: <u32>
-	Defintion: indicates that the regulator should not be forced to any
+	Definition: indicates that the regulator should not be forced to any
 		   particular mode, valid values are:
 		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
 		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> index 5e97a95..b98b291 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -178,7 +178,7 @@ see regulator.txt - with additional custom properties described below:
>  - qcom,force-mode:
>  	Usage: optional (default if no other qcom,force-mode is specified)
>  	Value type: <u32>
> -	Defintion: indicates that the regulator should be forced to a
> +	Definition: indicates that the regulator should be forced to a
>  		   particular mode, valid values are:
>  		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
>  		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
> @@ -204,7 +204,7 @@ see regulator.txt - with additional custom properties described below:
>  - qcom,force-mode:
>  	Usage: optional
>  	Value type: <u32>
> -	Defintion: indicates that the regulator should not be forced to any
> +	Definition: indicates that the regulator should not be forced to any
>  		   particular mode, valid values are:
>  		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
>  		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
> -- 
> 2.8.0
> 

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Lee Jones]

On Mon, 25 Apr 2016, Rob Herring wrote:

> On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
> > Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
> 
> Applied, thanks.

I'd prefer to continue taking these if you don't mind Rob.  It'd limit
on the amount of immutable branch pull requests I have to send/handle.

> > ---
> >  Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> > index 5e97a95..b98b291 100644
> > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> > @@ -178,7 +178,7 @@ see regulator.txt - with additional custom properties described below:
> >  - qcom,force-mode:
> >  	Usage: optional (default if no other qcom,force-mode is specified)
> >  	Value type: <u32>
> > -	Defintion: indicates that the regulator should be forced to a
> > +	Definition: indicates that the regulator should be forced to a
> >  		   particular mode, valid values are:
> >  		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
> >  		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
> > @@ -204,7 +204,7 @@ see regulator.txt - with additional custom properties described below:
> >  - qcom,force-mode:
> >  	Usage: optional
> >  	Value type: <u32>
> > -	Defintion: indicates that the regulator should not be forced to any
> > +	Definition: indicates that the regulator should not be forced to any
> >  		   particular mode, valid values are:
> >  		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
> >  		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 11:58 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Mon, 25 Apr 2016, Rob Herring wrote:
>
>> On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
>> > Signed-off-by: Eric Engestrom <eric@engestrom.ch>
>>
>> Applied, thanks.
>
> I'd prefer to continue taking these if you don't mind Rob.  It'd limit
> on the amount of immutable branch pull requests I have to send/handle.

Why? Do you really expect to have a dependency here?

Rob

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Lee Jones]

On Mon, 25 Apr 2016, Rob Herring wrote:

> On Mon, Apr 25, 2016 at 11:58 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Mon, 25 Apr 2016, Rob Herring wrote:
> >
> >> On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
> >> > Signed-off-by: Eric Engestrom <eric@engestrom.ch>
> >>
> >> Applied, thanks.
> >
> > I'd prefer to continue taking these if you don't mind Rob.  It'd limit
> > on the amount of immutable branch pull requests I have to send/handle.
> 
> Why? Do you really expect to have a dependency here?

Because the file is in ".*/mfd/.*", which normally goes through the MFD
tree.

$ git log --committer="Rob Herring" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
6
$ git log --committer="Lee Jones" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
99

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Rob Herring]

On Tue, Apr 26, 2016 at 1:35 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Mon, 25 Apr 2016, Rob Herring wrote:
>
>> On Mon, Apr 25, 2016 at 11:58 AM, Lee Jones <lee.jones@linaro.org> wrote:
>> > On Mon, 25 Apr 2016, Rob Herring wrote:
>> >
>> >> On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
>> >> > Signed-off-by: Eric Engestrom <eric@engestrom.ch>
>> >>
>> >> Applied, thanks.
>> >
>> > I'd prefer to continue taking these if you don't mind Rob.  It'd limit
>> > on the amount of immutable branch pull requests I have to send/handle.
>>
>> Why? Do you really expect to have a dependency here?
>
> Because the file is in ".*/mfd/.*", which normally goes through the MFD
> tree.
>
> $ git log --committer="Rob Herring" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
> 6
> $ git log --committer="Lee Jones" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
> 99

That is because most changes are coupled with drivers. For changes
that are standalone without any dependency, they go thru my tree. If
we're getting any merge conflicts beyond which Linus can/wants to fix,
then there is a problem because bindings shouldn't be changing that
much.

Eventually, I think we need to merge all the bindings thru a single
tree. Otherwise, we'll never move toward moving bindings out of the
kernel (unless we just sync from the kernel tree to a standalone
repo).

Rob

Re: [PATCH 15/41] Documentation: dt: mfd: fix spelling mistakes

[Lee Jones]

On Tue, 26 Apr 2016, Rob Herring wrote:

> On Tue, Apr 26, 2016 at 1:35 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> > On Mon, 25 Apr 2016, Rob Herring wrote:
> >
> >> On Mon, Apr 25, 2016 at 11:58 AM, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> >> > On Mon, 25 Apr 2016, Rob Herring wrote:
> >> >
> >> >> On Mon, Apr 25, 2016 at 01:24:12AM +0100, Eric Engestrom wrote:
> >> >> > Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
> >> >>
> >> >> Applied, thanks.
> >> >
> >> > I'd prefer to continue taking these if you don't mind Rob.  It'd limit
> >> > on the amount of immutable branch pull requests I have to send/handle.
> >>
> >> Why? Do you really expect to have a dependency here?
> >
> > Because the file is in ".*/mfd/.*", which normally goes through the MFD
> > tree.
> >
> > $ git log --committer="Rob Herring" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
> > 6
> > $ git log --committer="Lee Jones" --oneline -- Documentation/devicetree/bindings/mfd/ | wc -l
> > 99
> 
> That is because most changes are coupled with drivers. For changes
> that are standalone without any dependency, they go thru my tree. If
> we're getting any merge conflicts beyond which Linus can/wants to fix,
> then there is a problem because bindings shouldn't be changing that
> much.

That's certainly the first I've heard about it.  It makes far less
sense for changes pertaining to a single directory to go in via 2
separate trees.  IMO that's asking for trouble.

> Eventually, I think we need to merge all the bindings thru a single
> tree. Otherwise, we'll never move toward moving bindings out of the
> kernel (unless we just sync from the kernel tree to a standalone
> repo).

Once (if they ever) move out from the kernel tree, then I agree with
you, they should be dealt with as completely separate entities and be
merged though different trees, but until then we need to make a
decision; either you take them all or I take them all.  I thought we
were doing the latter already. 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 17/41] Documentation: dt: mtd: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
---
 Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
index c2546ce..0f6985b 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
@@ -52,7 +52,7 @@ Optional properties:
                               v7.0. Use this property to describe the rare
                               earlier versions of this core that include WP
 
- -- Additonal SoC-specific NAND controller properties --
+ -- Additional SoC-specific NAND controller properties --
 
 The NAND controller is integrated differently on the variety of SoCs on which it
 is found. Part of this integration involves providing status and enable bits
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 17/41] Documentation: dt: mtd: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:14AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> index c2546ce..0f6985b 100644
> --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt
> @@ -52,7 +52,7 @@ Optional properties:
>                                v7.0. Use this property to describe the rare
>                                earlier versions of this core that include WP
>  
> - -- Additonal SoC-specific NAND controller properties --
> + -- Additional SoC-specific NAND controller properties --
>  
>  The NAND controller is integrated differently on the variety of SoCs on which it
>  is found. Part of this integration involves providing status and enable bits
> -- 
> 2.8.0
> 

[PATCH 19/41] Documentation: dt: opp: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 601256f..ee91cbd 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -45,7 +45,7 @@ Devices supporting OPPs must set their "operating-points-v2" property with
 phandle to a OPP table in their DT node. The OPP core will use this phandle to
 find the operating points for the device.
 
-If required, this can be extended for SoC vendor specfic bindings. Such bindings
+If required, this can be extended for SoC vendor specific bindings. Such bindings
 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
 and should have a compatible description like: "operating-points-v2-<vendor>".
 
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 19/41] Documentation: dt: opp: fix spelling mistake

[Viresh Kumar]

On 25-04-16, 01:24, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>
> ---
>  Documentation/devicetree/bindings/opp/opp.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> index 601256f..ee91cbd 100644
> --- a/Documentation/devicetree/bindings/opp/opp.txt
> +++ b/Documentation/devicetree/bindings/opp/opp.txt
> @@ -45,7 +45,7 @@ Devices supporting OPPs must set their "operating-points-v2" property with
>  phandle to a OPP table in their DT node. The OPP core will use this phandle to
>  find the operating points for the device.
>  
> -If required, this can be extended for SoC vendor specfic bindings. Such bindings
> +If required, this can be extended for SoC vendor specific bindings. Such bindings
>  should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
>  and should have a compatible description like: "operating-points-v2-<vendor>".

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 19/41] Documentation: dt: opp: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:16AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/opp/opp.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> index 601256f..ee91cbd 100644
> --- a/Documentation/devicetree/bindings/opp/opp.txt
> +++ b/Documentation/devicetree/bindings/opp/opp.txt
> @@ -45,7 +45,7 @@ Devices supporting OPPs must set their "operating-points-v2" property with
>  phandle to a OPP table in their DT node. The OPP core will use this phandle to
>  find the operating points for the device.
>  
> -If required, this can be extended for SoC vendor specfic bindings. Such bindings
> +If required, this can be extended for SoC vendor specific bindings. Such bindings
>  should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
>  and should have a compatible description like: "operating-points-v2-<vendor>".
>  
> -- 
> 2.8.0
> 

[PATCH 21/41] Documentation: dt: power: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>
---
 Documentation/devicetree/bindings/power/qcom,coincell-charger.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
index 0e6d875..7478992 100644
--- a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
+++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
@@ -29,7 +29,7 @@ IC (PMIC)
 - qcom,charger-disable:
 	Usage: optional
 	Value type: <boolean>
-	Definition: definining this property disables charging
+	Definition: defining this property disables charging
 
 This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
 as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 21/41] Documentation: dt: power: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:18AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/power/qcom,coincell-charger.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
> index 0e6d875..7478992 100644
> --- a/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
> +++ b/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt
> @@ -29,7 +29,7 @@ IC (PMIC)
>  - qcom,charger-disable:
>  	Usage: optional
>  	Value type: <boolean>
> -	Definition: definining this property disables charging
> +	Definition: defining this property disables charging
>  
>  This charger is a sub-node of one of the 8941 PMIC blocks, and is specified
>  as a child node in DTS of that node.  See ../mfd/qcom,spmi-pmic.txt and
> -- 
> 2.8.0
> 

[PATCH 16/41] Documentation: dt: mmc: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
index 0cb827b..3d965d5 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
@@ -1,7 +1,7 @@
 * The simple eMMC hardware reset provider
 
 The purpose of this driver is to perform standard eMMC hw reset
-procedure, as descibed by Jedec 4.4 specification. This procedure is
+procedure, as described by Jedec 4.4 specification. This procedure is
 performed just after MMC core enabled power to the given mmc host (to
 fix possible issues if bootloader has left eMMC card in initialized or
 unknown state), and before performing complete system reboot (also in
-- 
2.8.0

Re: [PATCH 16/41] Documentation: dt: mmc: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:13AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> index 0cb827b..3d965d5 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
> @@ -1,7 +1,7 @@
>  * The simple eMMC hardware reset provider
>  
>  The purpose of this driver is to perform standard eMMC hw reset
> -procedure, as descibed by Jedec 4.4 specification. This procedure is
> +procedure, as described by Jedec 4.4 specification. This procedure is
>  performed just after MMC core enabled power to the given mmc host (to
>  fix possible issues if bootloader has left eMMC card in initialized or
>  unknown state), and before performing complete system reboot (also in
> -- 
> 2.8.0
> 

[PATCH 18/41] Documentation: dt: net: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt | 2 +-
 Documentation/devicetree/bindings/net/stmmac.txt            | 4 ++--
 Documentation/devicetree/bindings/net/ti,dp83867.txt        | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
index e6a9d1c..e911a63 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -8,7 +8,7 @@ Required properties:
   specifies a reference to the associating hardware driver node.
   see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
-  connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
+  connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
   are called debug ports.
 
   The remaining 6 PHYs are taken according to the mode of DSAF.
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 6605d19..9651dfd 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -51,8 +51,8 @@ Optional properties:
 			   AXI register inside the DMA module:
 	- snps,lpi_en: enable Low Power Interface
 	- snps,xit_frm: unlock on WoL
-	- snps,wr_osr_lmt: max write oustanding req. limit
-	- snps,rd_osr_lmt: max read oustanding req. limit
+	- snps,wr_osr_lmt: max write outstanding req. limit
+	- snps,rd_osr_lmt: max read outstanding req. limit
 	- snps,kbbe: do not cross 1KiB boundary.
 	- snps,axi_all: align address
 	- snps,blen: this is a vector of supported burst length.
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 58d935b..5d21141 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
-	- ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
+	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
 		for applicable values
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
 		for applicable values
-- 
2.8.0

Re: [PATCH 18/41] Documentation: dt: net: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:15AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt | 2 +-
>  Documentation/devicetree/bindings/net/stmmac.txt            | 4 ++--
>  Documentation/devicetree/bindings/net/ti,dp83867.txt        | 2 +-
>  3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
> index e6a9d1c..e911a63 100644
> --- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
> @@ -8,7 +8,7 @@ Required properties:
>    specifies a reference to the associating hardware driver node.
>    see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
>  - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
> -  connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
> +  connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
>    are called debug ports.
>  
>    The remaining 6 PHYs are taken according to the mode of DSAF.
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> index 6605d19..9651dfd 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -51,8 +51,8 @@ Optional properties:
>  			   AXI register inside the DMA module:
>  	- snps,lpi_en: enable Low Power Interface
>  	- snps,xit_frm: unlock on WoL
> -	- snps,wr_osr_lmt: max write oustanding req. limit
> -	- snps,rd_osr_lmt: max read oustanding req. limit
> +	- snps,wr_osr_lmt: max write outstanding req. limit
> +	- snps,rd_osr_lmt: max read outstanding req. limit
>  	- snps,kbbe: do not cross 1KiB boundary.
>  	- snps,axi_all: align address
>  	- snps,blen: this is a vector of supported burst length.
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> index 58d935b..5d21141 100644
> --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
> +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> @@ -2,7 +2,7 @@
>  
>  Required properties:
>  	- reg - The ID number for the phy, usually a small integer
> -	- ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
> +	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
>  		for applicable values
>  	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
>  		for applicable values
> -- 
> 2.8.0
> 

[PATCH 20/41] Documentation: dt: pinctrl: fix spelling mistake

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index a90c812..a54c39e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -122,7 +122,7 @@ to specify in a pin configuration subnode:
 		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
 		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
 		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
-		    If this property is ommited 30uA strength will be used if
+		    If this property is omitted 30uA strength will be used if
 		    pull up is selected
 
 - bias-high-impedance:
-- 
2.8.0

Re: [PATCH 20/41] Documentation: dt: pinctrl: fix spelling mistake

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:17AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@engestrom.ch>

Applied, thanks.

Rob

> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index a90c812..a54c39e 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -122,7 +122,7 @@ to specify in a pin configuration subnode:
>  		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
>  		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
>  		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
> -		    If this property is ommited 30uA strength will be used if
> +		    If this property is omitted 30uA strength will be used if
>  		    pull up is selected
>  
>  - bias-high-impedance:
> -- 
> 2.8.0
> 

[PATCH 22/41] Documentation: dt: soc: fix spelling mistakes

[Eric Engestrom]

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
---
 .../devicetree/bindings/soc/ti/keystone-navigator-qmss.txt          | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
index d1ce21a..64c66a5 100644
--- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
@@ -42,7 +42,7 @@ Required properties:
 - queue-pools	: child node classifying the queue ranges into pools.
 		  Queue ranges are grouped into 3 type of pools:
 		  - qpend	    : pool of qpend(interruptible) queues
-		  - general-purpose : pool of general queues, primarly used
+		  - general-purpose : pool of general queues, primarily used
 				      as free descriptor queues or the
 				      transmit DMA queues.
 		  - accumulator	    : pool of queues on PDSP accumulator channel
@@ -50,7 +50,7 @@ Required properties:
   -- qrange		: number of queues to use per queue range, specified as
 			  <"base queue #" "# of queues">.
   -- interrupts		: Optional property to specify the interrupt mapping
-			  for interruptible queues. The driver additionaly sets
+			  for interruptible queues. The driver additionally sets
 			  the interrupt affinity hint based on the cpu mask.
   -- qalloc-by-id	: Optional property to specify that the queues in this
 			  range can only be allocated by queue id.
@@ -80,7 +80,7 @@ Required properties:
 			  latency     : time to delay the interrupt, specified
 					in microseconds.
   -- multi-queue	: Optional property to specify that the channel has to
-			  monitor upto 32 queues starting at the base queue #.
+			  monitor up to 32 queues starting at the base queue #.
 - descriptor-regions	: child node describing the memory regions for keystone
 			  navigator packet DMA descriptors. The memory for
 			  descriptors will be allocated by the driver.
-- 
2.8.0

Re: [PATCH 22/41] Documentation: dt: soc: fix spelling mistakes

[Rob Herring]

On Mon, Apr 25, 2016 at 01:24:19AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric-op+oiCINJLTt9jDmeYuA0g@public.gmane.org>

Applied, thanks.

Rob

> ---
>  .../devicetree/bindings/soc/ti/keystone-navigator-qmss.txt          | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
> index d1ce21a..64c66a5 100644
> --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
> +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
> @@ -42,7 +42,7 @@ Required properties:
>  - queue-pools	: child node classifying the queue ranges into pools.
>  		  Queue ranges are grouped into 3 type of pools:
>  		  - qpend	    : pool of qpend(interruptible) queues
> -		  - general-purpose : pool of general queues, primarly used
> +		  - general-purpose : pool of general queues, primarily used
>  				      as free descriptor queues or the
>  				      transmit DMA queues.
>  		  - accumulator	    : pool of queues on PDSP accumulator channel
> @@ -50,7 +50,7 @@ Required properties:
>    -- qrange		: number of queues to use per queue range, specified as
>  			  <"base queue #" "# of queues">.
>    -- interrupts		: Optional property to specify the interrupt mapping
> -			  for interruptible queues. The driver additionaly sets
> +			  for interruptible queues. The driver additionally sets
>  			  the interrupt affinity hint based on the cpu mask.
>    -- qalloc-by-id	: Optional property to specify that the queues in this
>  			  range can only be allocated by queue id.
> @@ -80,7 +80,7 @@ Required properties:
>  			  latency     : time to delay the interrupt, specified
>  					in microseconds.
>    -- multi-queue	: Optional property to specify that the channel has to
> -			  monitor upto 32 queues starting at the base queue #.
> +			  monitor up to 32 queues starting at the base queue #.
>  - descriptor-regions	: child node describing the memory regions for keystone
>  			  navigator packet DMA descriptors. The memory for
>  			  descriptors will be allocated by the driver.
> -- 
> 2.8.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html