From: Alexandre TORGUE <alexandre.torgue@gmail.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, robh@kernel.org,
manabian@gmail.com, wens@csie.org
Subject: [PATCH v6 1/6] net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
Date: Mon, 25 Apr 2016 13:53:57 +0200 [thread overview]
Message-ID: <1461585242-32401-2-git-send-email-alexandre.torgue@gmail.com> (raw)
In-Reply-To: <1461585242-32401-1-git-send-email-alexandre.torgue@gmail.com>
stm324xx family chips support Synopsys MAC 3.510 IP.
This patch adds settings for logical glue logic:
-clocks
-mode selection MII or RMII.
Reviewed-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Tested-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cec147d..235d679 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -104,6 +104,18 @@ config DWMAC_STI
device driver. This driver is used on for the STi series
SOCs GMAC ethernet controller.
+config DWMAC_STM32
+ tristate "STM32 DWMAC support"
+ default ARCH_STM32
+ depends on OF && HAS_IOMEM
+ select MFD_SYSCON
+ ---help---
+ Support for ethernet controller on STM32 SOCs.
+
+ This selects STM32 SoC glue layer support for the stmmac
+ device driver. This driver is used on for the STM32 series
+ SOCs GMAC ethernet controller.
+
config DWMAC_SUNXI
tristate "Allwinner GMAC support"
default ARCH_SUNXI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 0fb362d..8828ada 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
+obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o
obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
new file mode 100644
index 0000000..5c2afe5
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -0,0 +1,193 @@
+/*
+ * dwmac-stm32.c - DWMAC Specific Glue layer for STM32 MCU
+ *
+ * Copyright (C) Alexandre Torgue 2015
+ * Author: Alexandre Torgue <alexandre.torgue@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+#define MII_PHY_SEL_MASK BIT(23)
+
+struct stm32_dwmac {
+ struct clk *clk_tx;
+ struct clk *clk_rx;
+ u32 mode_reg; /* MAC glue-logic mode register */
+ struct regmap *regmap;
+ u32 speed;
+};
+
+static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
+{
+ struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
+ u32 reg = dwmac->mode_reg;
+ u32 val;
+ int ret;
+
+ val = (plat_dat->interface == PHY_INTERFACE_MODE_MII) ? 0 : 1;
+ ret = regmap_update_bits(dwmac->regmap, reg, MII_PHY_SEL_MASK, val);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(dwmac->clk_tx);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(dwmac->clk_rx);
+ if (ret)
+ clk_disable_unprepare(dwmac->clk_tx);
+
+ return ret;
+}
+
+static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac)
+{
+ clk_disable_unprepare(dwmac->clk_tx);
+ clk_disable_unprepare(dwmac->clk_rx);
+}
+
+static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
+ struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ int err;
+
+ /* Get TX/RX clocks */
+ dwmac->clk_tx = devm_clk_get(dev, "mac-clk-tx");
+ if (IS_ERR(dwmac->clk_tx)) {
+ dev_err(dev, "No tx clock provided...\n");
+ return PTR_ERR(dwmac->clk_tx);
+ }
+ dwmac->clk_rx = devm_clk_get(dev, "mac-clk-rx");
+ if (IS_ERR(dwmac->clk_rx)) {
+ dev_err(dev, "No rx clock provided...\n");
+ return PTR_ERR(dwmac->clk_rx);
+ }
+
+ /* Get mode register */
+ dwmac->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
+ if (IS_ERR(dwmac->regmap))
+ return PTR_ERR(dwmac->regmap);
+
+ err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
+ if (err)
+ dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
+
+ return err;
+}
+
+static int stm32_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct stm32_dwmac *dwmac;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+ if (!dwmac)
+ return -ENOMEM;
+
+ ret = stm32_dwmac_parse_data(dwmac, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to parse OF data\n");
+ return ret;
+ }
+
+ plat_dat->bsp_priv = dwmac;
+
+ ret = stm32_dwmac_init(plat_dat);
+ if (ret)
+ return ret;
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ stm32_dwmac_clk_disable(dwmac);
+
+ return ret;
+}
+
+static int stm32_dwmac_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret = stmmac_dvr_remove(ndev);
+
+ stm32_dwmac_clk_disable(priv->plat->bsp_priv);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm32_dwmac_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ ret = stmmac_suspend(ndev);
+ stm32_dwmac_clk_disable(priv->plat->bsp_priv);
+
+ return ret;
+}
+
+static int stm32_dwmac_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ ret = stm32_dwmac_init(priv->plat);
+ if (ret)
+ return ret;
+
+ ret = stmmac_resume(ndev);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops, stm32_dwmac_suspend, stm32_dwmac_resume);
+
+static const struct of_device_id stm32_dwmac_match[] = {
+ { .compatible = "st,stm32-dwmac"},
+ { }
+};
+MODULE_DEVICE_TABLE(of, stm32_dwmac_match);
+
+static struct platform_driver stm32_dwmac_driver = {
+ .probe = stm32_dwmac_probe,
+ .remove = stm32_dwmac_remove,
+ .driver = {
+ .name = "stm32-dwmac",
+ .pm = &stm32_dwmac_pm_ops,
+ .of_match_table = stm32_dwmac_match,
+ },
+};
+module_platform_driver(stm32_dwmac_driver);
+
+MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@gmail.com>");
+MODULE_DESCRIPTION("STMicroelectronics MCU DWMAC Specific Glue layer");
+MODULE_LICENSE("GPL v2");
--
1.9.1
next prev parent reply other threads:[~2016-04-25 11:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 11:53 [PATCH v6 0/6] Add Ethernet support on STM32F429 Alexandre TORGUE
2016-04-25 11:53 ` Alexandre TORGUE [this message]
2016-04-25 11:53 ` [PATCH v6 2/6] Documentation: Bindings: Add STM32 DWMAC glue Alexandre TORGUE
[not found] ` <1461585242-32401-3-git-send-email-alexandre.torgue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-28 20:59 ` Rob Herring
2016-04-29 11:22 ` Maxime Coquelin
2016-04-25 11:53 ` [PATCH v6 3/6] net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP Alexandre TORGUE
2016-04-25 11:54 ` [PATCH v6 4/6] ARM: STM32: Enable Ethernet in stm32_defconfig Alexandre TORGUE
2016-04-28 11:56 ` Maxime Coquelin
2016-04-25 11:54 ` [PATCH v6 5/6] ARM: dts: stm32f429: Align Ethernet node with new bindings properties Alexandre TORGUE
2016-04-28 12:01 ` Maxime Coquelin
2016-04-25 11:54 ` [PATCH v6 6/6] ARM: dts: stm32f429: Update Ethernet node on Eval board Alexandre TORGUE
[not found] ` <1461585242-32401-7-git-send-email-alexandre.torgue-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-04-28 12:02 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461585242-32401-2-git-send-email-alexandre.torgue@gmail.com \
--to=alexandre.torgue@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manabian@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=robh@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).