From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Gross Subject: [Patch v2 0/8] Qualcomm SCM Rework Date: Mon, 25 Apr 2016 18:08:37 -0500 Message-ID: <1461625725-32425-1-git-send-email-andy.gross@linaro.org> Return-path: Sender: linux-arm-msm-owner@vger.kernel.org To: linux-arm-msm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, jilai wang , Stephen Boyd , Andy Gross List-Id: devicetree@vger.kernel.org The following set of patches does a bit of rework on the existing Qualcomm SCM firmware. The first couple of patches deals with turning the current SCM into a platform driver. The next couple are cleanups that make adding the 64 support a little easier. I took Kumar's 64 bit support patch and modified it to use the arm_smccc calls. This simplified things quite a bit. Lastly, there are a few DT patches to add the firmware node for a couple of the supported platforms. Change from v1: * Changed binding to reflect proper firmware node usage * Added arch_initcall to populate the firmware device, if present * Fixed various review comments * Removed extraneous includes from SCM 64 file. Andy Gross (7): dt/bindings: firmware: Add Qualcomm SCM binding firmware: qcom: scm: Convert SCM to platform driver firmware: qcom: scm: Generalize shared error map firmware: qcom: scm: Add memory allocation API firmware: qcom: scm: Use atomic SCM for cold boot dts: qcom: apq8084: Add SCM firmware node arm64: dts: msm8916: Add SCM firmware node Kumar Gala (1): firmware: qcom: scm: Add support for ARM64 SoCs .../devicetree/bindings/firmware/qcom,scm.txt | 28 +++ arch/arm/boot/dts/qcom-apq8084.dtsi | 8 + arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 + drivers/firmware/qcom_scm-32.c | 68 +++----- drivers/firmware/qcom_scm-64.c | 187 ++++++++++++++++++++- drivers/firmware/qcom_scm.c | 181 +++++++++++++++++++- drivers/firmware/qcom_scm.h | 25 +++ 8 files changed, 448 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt -- 1.9.1