From mboxrd@z Thu Jan 1 00:00:00 1970 From: Franklin S Cooper Jr Subject: [PATCH 1/5] ARM: Keystone: Enable PINCTRL for Keystone ARCH Date: Wed, 27 Apr 2016 09:11:44 -0500 Message-ID: <1461766308-27669-2-git-send-email-fcooper@ti.com> References: <1461766308-27669-1-git-send-email-fcooper@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1461766308-27669-1-git-send-email-fcooper@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: robh+dt@kernel.org, linux@arm.linux.org.uk, ssantosh@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Lokesh Vutla , Franklin S Cooper Jr , Dave Gerlach List-Id: devicetree@vger.kernel.org From: Lokesh Vutla Some Keystone 2 devices utilize pinmuxing which requires PINCTRL to be enabled. Therefore, enable PINCTRL for all Keystone 2 devices. Signed-off-by: Lokesh Vutla Signed-off-by: Franklin S Cooper Jr Signed-off-by: Dave Gerlach --- arch/arm/mach-keystone/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index ea955f6db..7a432ee 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -11,6 +11,7 @@ config ARCH_KEYSTONE select ZONE_DMA if ARM_LPAE select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI + select PINCTRL help Support for boards based on the Texas Instruments Keystone family of SoCs. -- 2.7.0