From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lubomir Rintel Subject: Re: [PATCH v2 1/2] ARM: bcm2835: dt: Add the ethernet to the device trees Date: Thu, 28 Apr 2016 18:29:47 +0200 Message-ID: <1461860987.3780.24.camel@v3.sk> References: <1454571364-24708-1-git-send-email-lkundrak@v3.sk> <1454571364-24708-2-git-send-email-lkundrak@v3.sk> <56B572D8.9030701@wwwdotorg.org> <572239A4.3030100@i2se.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <572239A4.3030100@i2se.com> Sender: linux-kernel-owner@vger.kernel.org To: Stefan Wahren , Olivier Blin , eric@anholt.net Cc: devicetree@vger.kernel.org, Arnd Bergmann , linux-kernel@vger.kernel.org, Peter Chen , linux-rpi-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Thu, 2016-04-28 at 18:26 +0200, Stefan Wahren wrote: > Hi Olivier > > Am 28.04.2016 um 14:52 schrieb Olivier Blin: > > > > Stephen Warren writes: > > > > > > > > On 02/04/2016 12:36 AM, Lubomir Rintel wrote: > > > > > > > > The hub and the ethernet in its port 1 are hardwired on the > > > > board. > > > > > > > > Compared to the adapters that can be plugged into the USB > > > > ports, this > > > > one has no serial EEPROM to store its MAC. Nevertheless, the > > > > Raspberry Pi > > > > has the MAC address for this adapter in its ROM, accessible > > > > from its > > > > firmware. > > > > > > > > U-Boot can read out the address and set the local-mac-address > > > > property of the > > > > node with "ethernet" alias. Let's add the node so that U-Boot > > > > can do its > > > > business. > > > > > > > > Model B rev2 and Model B+ entries were verified by me, the > > > > hierarchy and > > > > pid/vid pair for the Version 2 was provided by Olivier Blin. > > > > Original > > > > Model B is a blind short, though very likely correct. > > > The series, > > > Tested-by: Stephen Warren > > > > > > A few nits though... > > [...] > > > > Is this still being queued in some tree? > > Or does it need more fixes and a resubmit? > Yes, a V3 should address the comments from Peter and Stephen. I'll follow up with an updated patch set. Sorry for the delay. > > Regards > Stefan > > > > > > > Without this, Raspberry Pi devices boot with a random MAC address. > > >