From mboxrd@z Thu Jan 1 00:00:00 1970 From: Iyappan Subramanian Subject: [PATCH v2 2/3] Documentation: dtb: xgene: Add channel property Date: Fri, 29 Apr 2016 11:10:14 -0700 Message-ID: <1461953415-9741-3-git-send-email-isubramanian@apm.com> References: <1461953415-9741-1-git-send-email-isubramanian@apm.com> Return-path: In-Reply-To: <1461953415-9741-1-git-send-email-isubramanian@apm.com> Sender: netdev-owner@vger.kernel.org To: davem@davemloft.net, netdev@vger.kernel.org, devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, patches@apm.com, Iyappan Subramanian List-Id: devicetree@vger.kernel.org Signed-off-by: Iyappan Subramanian --- Documentation/devicetree/bindings/net/apm-xgene-enet.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index 078060a..05f705e3 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -18,6 +18,8 @@ Required properties for all the ethernet interfaces: - First is the Rx interrupt. This irq is mandatory. - Second is the Tx completion interrupt. This is supported only on SGMII based 1GbE and 10GbE interfaces. +- channel: Ethernet to CPU, start channel (prefetch buffer) number + - Must map to the first irq and irqs must be sequential - port-id: Port number (0 or 1) - clocks: Reference to the clock entry. - local-mac-address: MAC address assigned to this device -- 1.9.1