From: Venkat Reddy Talla <vreddytalla-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: MyungJoo Ham
<myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Laxman Dewangan
<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Venkat Reddy Talla
<vreddytalla-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 1/2] extcon: gpio: add device tree support for extcon-gpio
Date: Tue, 3 May 2016 11:19:50 +0530 [thread overview]
Message-ID: <1462254591-8907-1-git-send-email-vreddytalla@nvidia.com> (raw)
Adding device tree support for extcon-gpio driver.
Signed-off-by: Venkat Reddy Talla <vreddytalla-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/extcon/extcon-gpio.c | 80 +++++++++++++++++++++++++++++++++++---
include/linux/extcon/extcon-gpio.h | 2 +
2 files changed, 76 insertions(+), 6 deletions(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index d023789..b7fae7e 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -28,6 +28,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
struct gpio_extcon_data {
struct extcon_dev *edev;
@@ -90,21 +92,79 @@ static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
return 0;
}
+static struct gpio_extcon_pdata *gpio_extcon_of_pdata(
+ struct platform_device *pdev)
+{
+ struct gpio_extcon_pdata *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ int gpio;
+ u32 pval;
+ int ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ gpio = of_get_named_gpio(np, "gpio", 0);
+ if (gpio < 0)
+ return ERR_PTR(gpio);
+
+ pdata->gpio = gpio;
+
+ ret = of_property_read_u32(np, "extcon-gpio,irq-flags", &pval);
+ if (!ret)
+ pdata->irq_flags = pval;
+ else
+ pdata->irq_flags = IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING;
+
+ ret = of_property_read_u32(np, "extcon-gpio,debounce", &pval);
+ if (!ret)
+ pdata->debounce = pval;
+
+ pdata->gpio_active_low = of_property_read_bool(np,
+ "extcon-gpio,connection-state-low");
+
+ pdata->extcon_cable_cnt = of_property_count_u32_elems(np,
+ "extcon-gpio,cable-names");
+ if (pdata->extcon_cable_cnt <= 0) {
+ dev_err(&pdev->dev, "not found out cable names\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata->extcon_cable_names = devm_kzalloc(&pdev->dev,
+ (pdata->extcon_cable_cnt) *
+ sizeof(*pdata->extcon_cable_names), GFP_KERNEL);
+ if (!pdata->extcon_cable_names)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32_array(np, "extcon-gpio,cable-names",
+ pdata->extcon_cable_names, pdata->extcon_cable_cnt);
+ if (ret)
+ return ERR_PTR(-EINVAL);
+
+ return pdata;
+}
+
static int gpio_extcon_probe(struct platform_device *pdev)
{
struct gpio_extcon_pdata *pdata = dev_get_platdata(&pdev->dev);
struct gpio_extcon_data *data;
int ret;
- if (!pdata)
- return -EBUSY;
- if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
- return -EINVAL;
-
data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
+
+ if (!pdata && pdev->dev.of_node)
+ pdata = gpio_extcon_of_pdata(pdev);
+
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ if (!pdata->irq_flags || !pdata->extcon_cable_names)
+ return -EINVAL;
+
data->pdata = pdata;
/* Initialize the gpio */
@@ -113,7 +173,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
return ret;
/* Allocate the memory of extcon devie and register extcon device */
- data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
+ data->edev = devm_extcon_dev_allocate(&pdev->dev,
+ pdata->extcon_cable_names);
if (IS_ERR(data->edev)) {
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
@@ -167,12 +228,19 @@ static int gpio_extcon_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
+static const struct of_device_id of_extcon_gpio_tbl[] = {
+ { .compatible = "extcon-gpio", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_extcon_gpio_tbl);
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.pm = &gpio_extcon_pm_ops,
+ .of_match_table = of_extcon_gpio_tbl,
},
};
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 7cacafb..c27df9b 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -36,6 +36,8 @@
*/
struct gpio_extcon_pdata {
unsigned int extcon_id;
+ unsigned int *extcon_cable_names;
+ int extcon_cable_cnt;
unsigned gpio;
bool gpio_active_low;
unsigned long debounce;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-05-03 5:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 5:49 Venkat Reddy Talla [this message]
2016-05-03 5:49 ` [PATCH 2/2] extcon: gpio: add DT binding doc for extcon-gpio Venkat Reddy Talla
[not found] ` <1462254591-8907-2-git-send-email-vreddytalla-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-05-04 13:30 ` Rob Herring
2016-05-17 11:27 ` Venkat Reddy Talla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462254591-8907-1-git-send-email-vreddytalla@nvidia.com \
--to=vreddytalla-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).