From: Franklin S Cooper Jr <fcooper@ti.com>
To: thierry.reding@gmail.com, robh+dt@kernel.org, tony@atomide.com,
linux@arm.linux.org.uk, paul@pwsan.com, t-kristo@ti.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
vigneshr@ti.com, nsekhar@ti.com
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Subject: [PATCH v8 9/9] ARM: dts: DRA7: Add dt nodes for PWMSS
Date: Tue, 3 May 2016 10:56:55 -0500 [thread overview]
Message-ID: <1462291015-1919-10-git-send-email-fcooper@ti.com> (raw)
In-Reply-To: <1462291015-1919-1-git-send-email-fcooper@ti.com>
From: Vignesh R <vigneshr@ti.com>
Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.
Signed-off-by: Vignesh R <vigneshr@ti.com>
[fcooper@ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 9 +++
.../devicetree/bindings/pwm/pwm-tipwmss.txt | 12 +++
arch/arm/boot/dts/dra7.dtsi | 90 ++++++++++++++++++++++
4 files changed, 120 insertions(+)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index f2a9a7c..8007e83 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -5,6 +5,7 @@ Required properties:
for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -38,3 +39,11 @@ ecap0: ecap@1f06000 { /* ECAP on da850 */
#pwm-cells = <3>;
reg = <0x1f06000 0x80>;
};
+
+ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap", "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 41a2bd4..944fe35 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -5,6 +5,7 @@ Required properties:
for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
for am4372 - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -38,3 +39,11 @@ ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
#pwm-cells = <3>;
reg = <0x1f00000 0x2000>;
};
+
+ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
+ compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index fd8e87c..1a5d7b7 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must be "ti,<soc>-pwmss".
for am33xx - compatible = "ti,am33xx-pwmss";
for am4372 - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
- reg: physical base address and size of the registers map.
- address-cells: Specify the number of u32 entries needed in child nodes.
@@ -46,3 +47,14 @@ epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
/* child nodes go here */
};
+
+epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* child nodes go here */
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e007401..5a21e46 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1743,6 +1743,96 @@
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss@4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm@4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm@48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap@48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm@48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap@48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
};
thermal_zones: thermal-zones {
--
2.7.0
next prev parent reply other threads:[~2016-05-03 15:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 15:56 [PATCH v8 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 1/9] clk: ti: am335x/am4372: Add tbclk to pwm node Franklin S Cooper Jr
2016-07-11 22:20 ` Michael Turquette
2016-07-12 13:45 ` Franklin S Cooper Jr.
2016-05-03 15:56 ` [PATCH v8 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name Franklin S Cooper Jr
2016-07-11 9:55 ` Thierry Reding
2016-05-03 15:56 ` [PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address Franklin S Cooper Jr
2016-05-04 13:47 ` Rob Herring
2016-07-11 9:56 ` Thierry Reding
2016-07-11 10:06 ` Thierry Reding
2016-07-11 10:33 ` Thierry Reding
2016-05-03 15:56 ` [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings Franklin S Cooper Jr
2016-06-10 10:34 ` Tony Lindgren
2016-06-10 12:01 ` Tony Lindgren
2016-06-10 12:40 ` Thierry Reding
2016-06-10 13:01 ` Tony Lindgren
2016-05-03 15:56 ` [PATCH v8 6/9] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings Franklin S Cooper Jr
2016-06-10 12:48 ` Thierry Reding
2016-05-03 15:56 ` [PATCH v8 7/9] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 8/9] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries Franklin S Cooper Jr
2016-06-10 12:03 ` Tony Lindgren
2016-05-03 15:56 ` Franklin S Cooper Jr [this message]
2016-06-03 19:00 ` [PATCH v8 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin Cooper Jr.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462291015-1919-10-git-send-email-fcooper@ti.com \
--to=fcooper@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).