From: Franklin S Cooper Jr <fcooper@ti.com>
To: thierry.reding@gmail.com, robh+dt@kernel.org, tony@atomide.com,
linux@arm.linux.org.uk, paul@pwsan.com, t-kristo@ti.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
vigneshr@ti.com, nsekhar@ti.com
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Subject: [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
Date: Tue, 3 May 2016 10:56:51 -0500 [thread overview]
Message-ID: <1462291015-1919-6-git-send-email-fcooper@ti.com> (raw)
In-Reply-To: <1462291015-1919-1-git-send-email-fcooper@ti.com>
Switch to a new ECAP and EPWM bindings that doesn't depend on hwmod to
provide the various required clocks.
For AM437 and AM335x, add the required clocks explicitly to DT. The
hwmod entries for ECAP and EPWM will be removed and this will prevent
anything from breaking.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/pwm/pwm-tiecap.txt | 18 +++++---
.../devicetree/bindings/pwm/pwm-tiehrpwm.txt | 18 +++++---
arch/arm/boot/dts/am33xx.dtsi | 30 +++++++++---
arch/arm/boot/dts/am4372.dtsi | 54 ++++++++++++++++++----
arch/arm/boot/dts/da850.dtsi | 15 ++++--
5 files changed, 103 insertions(+), 32 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 0d47354..ee0a8bd 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,9 +2,9 @@ TI SOC ECAP based APWM controller
Required properties:
- compatible: Must be "ti,<soc>-ecap".
- for am33xx - compatible = "ti,am33xx-ecap";
- for am4372 - compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
- for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -13,25 +13,31 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the ECAP:
"ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
Example:
ecap0: ecap@48300100 { /* ECAP on am33xx */
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
};
ecap0: ecap@48300100 { /* ECAP on am4372 */
- compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
};
ecap0: ecap@1f06000 { /* ECAP on da850 */
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x1f06000 0x80>;
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index f3bc09e..e9a156b 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,9 +2,9 @@ TI SOC EHRPWM based PWM controller
Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
- for am33xx - compatible = "ti,am33xx-ehrpwm";
- for am4372 - compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
- for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for am4372 - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
@@ -13,25 +13,31 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmod associated to the EHRPWM:
"ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
Example:
ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
- compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x1f00000 0x2000>;
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 52be48b..999ba2f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -679,9 +679,12 @@
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
ti,hwmods = "ecap0";
@@ -689,10 +692,13 @@
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -709,9 +715,12 @@
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
ti,hwmods = "ecap1";
@@ -719,10 +728,13 @@
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -739,9 +751,12 @@
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
ti,hwmods = "ecap2";
@@ -749,10 +764,13 @@
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4..e858460 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -672,18 +672,26 @@
status = "disabled";
ecap0: ecap@48300100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -698,18 +706,26 @@
status = "disabled";
ecap1: ecap@48302100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -724,18 +740,26 @@
status = "disabled";
ecap2: ecap@48304100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -750,10 +774,14 @@
status = "disabled";
ehrpwm3: pwm@48306200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -768,10 +796,14 @@
status = "disabled";
ehrpwm4: pwm@48308200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -786,9 +818,13 @@
status = "disabled";
ehrpwm5: pwm@4830a200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm5";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3910e2..28a1064 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -248,31 +248,36 @@
status = "disabled";
};
ehrpwm0: pwm@01f00000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: pwm@01f02000 {
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@01f06000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@01f07000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@01f08000 {
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ compatible = "ti,da850-ecap", "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
--
2.7.0
next prev parent reply other threads:[~2016-05-03 15:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 15:56 [PATCH v8 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 1/9] clk: ti: am335x/am4372: Add tbclk to pwm node Franklin S Cooper Jr
2016-07-11 22:20 ` Michael Turquette
2016-07-12 13:45 ` Franklin S Cooper Jr.
2016-05-03 15:56 ` [PATCH v8 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name Franklin S Cooper Jr
2016-07-11 9:55 ` Thierry Reding
2016-05-03 15:56 ` [PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address Franklin S Cooper Jr
2016-05-04 13:47 ` Rob Herring
2016-07-11 9:56 ` Thierry Reding
2016-07-11 10:06 ` Thierry Reding
2016-07-11 10:33 ` Thierry Reding
2016-05-03 15:56 ` Franklin S Cooper Jr [this message]
2016-06-10 10:34 ` [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings Tony Lindgren
2016-06-10 12:01 ` Tony Lindgren
2016-06-10 12:40 ` Thierry Reding
2016-06-10 13:01 ` Tony Lindgren
2016-05-03 15:56 ` [PATCH v8 6/9] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings Franklin S Cooper Jr
2016-06-10 12:48 ` Thierry Reding
2016-05-03 15:56 ` [PATCH v8 7/9] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes Franklin S Cooper Jr
2016-05-03 15:56 ` [PATCH v8 8/9] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries Franklin S Cooper Jr
2016-06-10 12:03 ` Tony Lindgren
2016-05-03 15:56 ` [PATCH v8 9/9] ARM: dts: DRA7: Add dt nodes for PWMSS Franklin S Cooper Jr
2016-06-03 19:00 ` [PATCH v8 0/9] " Franklin Cooper Jr.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462291015-1919-6-git-send-email-fcooper@ti.com \
--to=fcooper@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=paul@pwsan.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).