[v9, 0/7] Fix eSDHC host version register bug

[v9, 0/7] Fix eSDHC host version register bug

[Yangbo Lu]

This patchset is used to fix a host version register bug in the T4240-R1.0-R2.0
eSDHC controller. To get the SoC version and revision, it's needed to add the
GUTS driver to access the global utilities registers.

So, the first four patches are to add the GUTS driver.
The following patches except the updating MAINTAINERS patch are to enable
GUTS driver support to get SVR in eSDHC driver and fix host version for T4240.

Yangbo Lu (7):
  Documentation: DT: update Freescale DCFG compatible
  ARM64: dts: ls2080a: add device configuration node
  soc: fsl: add GUTS driver for QorIQ platforms
  dt: move guts devicetree doc out of powerpc directory
  powerpc/fsl: move mpc85xx.h to include/linux/fsl
  MAINTAINERS: add entry for Freescale SoC driver
  mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0

 Documentation/devicetree/bindings/arm/fsl.txt      |   6 +-
 .../bindings/{powerpc => soc}/fsl/guts.txt         |   3 +
 MAINTAINERS                                        |  11 +-
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi     |   6 +
 arch/powerpc/kernel/cpu_setup_fsl_booke.S          |   2 +-
 drivers/clk/clk-qoriq.c                            |   3 +-
 drivers/i2c/busses/i2c-mpc.c                       |   2 +-
 drivers/iommu/fsl_pamu.c                           |   3 +-
 drivers/mmc/host/Kconfig                           |   1 +
 drivers/mmc/host/sdhci-of-esdhc.c                  |  23 ++++
 drivers/net/ethernet/freescale/gianfar.c           |   2 +-
 drivers/soc/Kconfig                                |   2 +-
 drivers/soc/fsl/Kconfig                            |   8 ++
 drivers/soc/fsl/Makefile                           |   1 +
 drivers/soc/fsl/guts.c                             | 119 +++++++++++++++++++
 include/linux/fsl/guts.h                           | 126 +++++++++++++--------
 .../asm/mpc85xx.h => include/linux/fsl/svr.h       |   4 +-
 17 files changed, 262 insertions(+), 60 deletions(-)
 rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt (91%)
 create mode 100644 drivers/soc/fsl/Kconfig
 create mode 100644 drivers/soc/fsl/guts.c
 rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)

-- 
2.1.0.27.g96db324

[v9, 2/7] ARM64: dts: ls2080a: add device configuration node

[Yangbo Lu]

Add the dts node for device configuration unit that provides
general purpose configuration and status for the device.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
---
Changes for v5:
	- Added this patch
Changes for v6:
	- None
Changes for v7:
	- None
Changes for v8:
	- Added 'Acked-by: Scott Wood'
Changes for v9:
	- None
---
 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 9d746c6..8724cf1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -191,6 +191,12 @@
 			clocks = <&sysclk>;
 		};
 
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls2080a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
 		serial0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0500 0x0 0x100>;
-- 
2.1.0.27.g96db324

[v9, 3/7] soc: fsl: add GUTS driver for QorIQ platforms

[Yangbo Lu]

The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.

This patch adds GUTS driver to manage and access global utilities
block.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
---
Changes for v4:
	- Added this patch
Changes for v5:
	- Modified copyright info
	- Changed MODULE_LICENSE to GPL
	- Changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL
	- Made FSL_GUTS user-invisible
	- Added a complete compatible list for GUTS
	- Stored guts info in file-scope variable
	- Added mfspr() getting SVR
	- Redefined GUTS APIs
	- Called fsl_guts_init rather than using platform driver
	- Removed useless parentheses
	- Removed useless 'extern' key words
Changes for v6:
	- Made guts thread safe in fsl_guts_init
Changes for v7:
	- Removed 'ifdef' for function declaration in guts.h
Changes for v8:
	- Fixes lines longer than 80 characters checkpatch issue
	- Added 'Acked-by: Scott Wood'
Changes for v9:
	- None
---
 drivers/soc/Kconfig      |   2 +-
 drivers/soc/fsl/Kconfig  |   8 +++
 drivers/soc/fsl/Makefile |   1 +
 drivers/soc/fsl/guts.c   | 119 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/fsl/guts.h | 126 +++++++++++++++++++++++++++++------------------
 5 files changed, 207 insertions(+), 49 deletions(-)
 create mode 100644 drivers/soc/fsl/Kconfig
 create mode 100644 drivers/soc/fsl/guts.c

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cb58ef0..7106463 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,7 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/brcmstb/Kconfig"
-source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 0000000..b313759
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,8 @@
+#
+# Freescale SOC drivers
+#
+
+source "drivers/soc/fsl/qe/Kconfig"
+
+config FSL_GUTS
+	bool
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 203307f..02afb7f 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
+obj-$(CONFIG_FSL_GUTS)			+= guts.o
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
new file mode 100644
index 0000000..fa155e6
--- /dev/null
+++ b/drivers/soc/fsl/guts.c
@@ -0,0 +1,119 @@
+/*
+ * Freescale QorIQ Platforms GUTS Driver
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
+
+struct guts {
+	struct ccsr_guts __iomem *regs;
+	bool little_endian;
+};
+
+static struct guts *guts;
+static DEFINE_MUTEX(guts_lock);
+
+u32 fsl_guts_get_svr(void)
+{
+	u32 svr = 0;
+
+	if (!guts || !guts->regs) {
+#ifdef CONFIG_PPC
+		svr =  mfspr(SPRN_SVR);
+#endif
+		return svr;
+	}
+
+	if (guts->little_endian)
+		svr = ioread32(&guts->regs->svr);
+	else
+		svr = ioread32be(&guts->regs->svr);
+
+	return svr;
+}
+EXPORT_SYMBOL(fsl_guts_get_svr);
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for Freescale QorIQ SOCs.
+ */
+static const struct of_device_id guts_of_match[] = {
+	/* For T4 & B4 Series SOCs */
+	{ .compatible = "fsl,qoriq-device-config-1.0", },
+	/* For P Series SOCs */
+	{ .compatible = "fsl,qoriq-device-config-2.0", },
+	{ .compatible = "fsl,p1010-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	/* For BSC Series SOCs */
+	{ .compatible = "fsl,bsc9131-guts", },
+	{ .compatible = "fsl,bsc9132-guts", },
+	/* For MPC85xx Series SOCs */
+	{ .compatible = "fsl,mpc8536-guts", },
+	{ .compatible = "fsl,mpc8544-guts", },
+	{ .compatible = "fsl,mpc8548-guts", },
+	{ .compatible = "fsl,mpc8568-guts", },
+	{ .compatible = "fsl,mpc8569-guts", },
+	{ .compatible = "fsl,mpc8572-guts", },
+	/* For Layerscape Series SOCs */
+	{ .compatible = "fsl,ls1021a-dcfg", },
+	{ .compatible = "fsl,ls1043a-dcfg", },
+	{ .compatible = "fsl,ls2080a-dcfg", },
+	{}
+};
+
+int fsl_guts_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	mutex_lock(&guts_lock);
+	/* Initialize guts only once */
+	if (guts) {
+		ret = guts->regs ? 0 : -ENOMEM;
+		goto out;
+	}
+
+	np = of_find_matching_node(NULL, guts_of_match);
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	guts = kzalloc(sizeof(*guts), GFP_KERNEL);
+	if (!guts) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	guts->little_endian = of_property_read_bool(np, "little-endian");
+
+	guts->regs = of_iomap(np, 0);
+	if (!guts->regs) {
+		ret = -ENOMEM;
+		kfree(guts);
+		goto out;
+	}
+
+	of_node_put(np);
+	ret = 0;
+out:
+	mutex_unlock(&guts_lock);
+	return ret;
+}
+EXPORT_SYMBOL(fsl_guts_init);
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
index 649e917..7e1e22b 100644
--- a/include/linux/fsl/guts.h
+++ b/include/linux/fsl/guts.h
@@ -29,83 +29,113 @@
  * #ifdefs.
  */
 struct ccsr_guts {
-	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
-	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
-	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
-	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
-	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
+	u32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	u32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	u32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and
+				 *           Control Register
+				 */
+	u32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	u32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	u32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
 	u8	res018[0x20 - 0x18];
-	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u32	porcir;		/* 0x.0020 - POR Configuration Information
+				 *           Register
+				 */
 	u8	res024[0x30 - 0x24];
-	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u32	gpiocr;		/* 0x.0030 - GPIO Control Register */
 	u8	res034[0x40 - 0x34];
-	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data
+				 *           Register
+				 */
 	u8	res044[0x50 - 0x44];
-	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u32	gpindr;		/* 0x.0050 - General-Purpose Input Data
+				 *           Register
+				 */
 	u8	res054[0x60 - 0x54];
-	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
-        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
+	u32	pmuxcr;		/* 0x.0060 - Alternate Function Signal
+				 *           Multiplex Control
+				 */
+	u32	pmuxcr2;	/* 0x.0064 - Alternate function signal
+				 *           multiplex control 2
+				 */
+	u32	dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
-	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+	u32	devdisr;	/* 0x.0070 - Device Disable Control */
 #define CCSR_GUTS_DEVDISR_TB1	0x00001000
 #define CCSR_GUTS_DEVDISR_TB0	0x00004000
-	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
-	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
-	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
-	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
-	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
-	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
-	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
-	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
-	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
-	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u32	pmjcr;		/* 0x.007c - 4 Power Management Jog Control
+				 *           Register
+				 */
+	u32	powmgtcsr;	/* 0x.0080 - Power Management Status and
+				 *           Control Register
+				 */
+	u32	pmrccr;		/* 0x.0084 - Power Management Reset Counter
+				 *           Configuration Register
+				 */
+	u32	pmpdccr;	/* 0x.0088 - Power Management Power Down Counter
+				 *           Configuration Register
+				 */
+	u32	pmcdr;		/* 0x.008c - 4Power management clock disable
+				 *           register
+				 */
+	u32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	u32	rstrscr;	/* 0x.0094 - Reset Request Status and
+				 *           Control Register
+				 */
+	u32	ectrstcr;	/* 0x.0098 - Exception reset control register */
+	u32	autorstsr;	/* 0x.009c - Automatic reset status register */
+	u32	pvr;		/* 0x.00a0 - Processor Version Register */
+	u32	svr;		/* 0x.00a4 - System Version Register */
 	u8	res0a8[0xb0 - 0xa8];
-	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u32	rstcr;		/* 0x.00b0 - Reset Control Register */
 	u8	res0b4[0xc0 - 0xb4];
-	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register
+	u32	iovselsr;	/* 0x.00c0 - I/O voltage select status register
 					     Called 'elbcvselcr' on 86xx SOCs */
 	u8	res0c4[0x100 - 0xc4];
-	__be32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
+	u32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
 					     There are 16 registers */
 	u8	res140[0x224 - 0x140];
-	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
-	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
+	u32	iodelay1;	/* 0x.0224 - IO delay control register 1 */
+	u32	iodelay2;	/* 0x.0228 - IO delay control register 2 */
 	u8	res22c[0x604 - 0x22c];
-	__be32	pamubypenr; 	/* 0x.604 - PAMU bypass enable register */
+	u32	pamubypenr;	/* 0x.604 - PAMU bypass enable register */
 	u8	res608[0x800 - 0x608];
-	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
 	u8	res804[0x900 - 0x804];
-	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u32	ircr;		/* 0x.0900 - Infrared Control Register */
 	u8	res904[0x908 - 0x904];
-	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u32	dmacr;		/* 0x.0908 - DMA Control Register */
 	u8	res90c[0x914 - 0x90c];
-	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u32	elbccr;		/* 0x.0914 - eLBC Control Register */
 	u8	res918[0xb20 - 0x918];
-	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
-	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
-	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	u32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	u32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
 	u8	resb2c[0xe00 - 0xb2c];
-	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
 	u8	rese04[0xe10 - 0xe04];
-	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
 	u8	rese14[0xe20 - 0xe14];
-	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
+	u32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	u32	cpfor;		/* 0x.0e24 - L2 charge pump fuse override
+				 *           register
+				 */
 	u8	rese28[0xf04 - 0xe28];
-	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
-	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	u32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
 	u8	resf0c[0xf2c - 0xf0c];
-	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
+	u32	itcr;		/* 0x.0f2c - Internal transaction control
+				 *           register
+				 */
 	u8	resf30[0xf40 - 0xf30];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
+	u32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
+	u32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
+u32 fsl_guts_get_svr(void);
+int fsl_guts_init(void);
 
 /* Alternate function signal multiplex control */
 #define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
-- 
2.1.0.27.g96db324

[v9, 1/7] Documentation: DT: update Freescale DCFG compatible

[Yangbo Lu]

Update Freescale DCFG compatible with 'fsl,<chip>-dcfg' instead
of 'fsl,ls1021a-dcfg' to include more chips such as ls1021a,
ls1043a, and ls2080a.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v8:
	- Added this patch
Changes for v9:
	- Added a list for the possible compatibles
---
 Documentation/devicetree/bindings/arm/fsl.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 752a685..465cba1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -119,7 +119,11 @@ Freescale DCFG
 configuration and status for the device. Such as setting the secondary
 core start address and release the secondary core from holdoff and startup.
   Required properties:
-  - compatible: should be "fsl,ls1021a-dcfg"
+  - compatible: should be "fsl,<chip>-dcfg"
+    Possible compatibles:
+	"fsl,ls1021a-dcfg"
+	"fsl,ls1043a-dcfg"
+	"fsl,ls2080a-dcfg"
   - reg : should contain base address and length of DCFG memory-mapped registers
 
 Example:
-- 
2.1.0.27.g96db324

[v9, 4/7] dt: move guts devicetree doc out of powerpc directory

[Yangbo Lu]

Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/
since it's used by not only PowerPC but also ARM. And add a specification
for 'little-endian' property.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
Acked-by: Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
Changes for v4:
	- Added this patch
Changes for v5:
	- Modified the description for little-endian property
Changes for v6:
	- None
Changes for v7:
	- None
Changes for v8:
	- Added 'Acked-by: Scott Wood'
	- Added 'Acked-by: Rob Herring'
Changes for v9:
	- None
---
 Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt | 3 +++
 1 file changed, 3 insertions(+)
 rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt (91%)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt
similarity index 91%
rename from Documentation/devicetree/bindings/powerpc/fsl/guts.txt
rename to Documentation/devicetree/bindings/soc/fsl/guts.txt
index b71b203..07adca9 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -25,6 +25,9 @@ Recommended properties:
  - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
    registers, for those SOCs that have a PAMU device.
 
+ - little-endian : Indicates that the global utilities block is little
+   endian. The default is big endian.
+
 Examples:
 	global-utilities@e0000 {	/* global utilities block */
 		compatible = "fsl,mpc8548-guts";
-- 
2.1.0.27.g96db324

[v9, 5/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl

[Yangbo Lu]

Move mpc85xx.h to include/linux/fsl and rename it to svr.h as
a common header file. It has been used for mpc85xx and it will
be used for ARM-based SoC as well.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
Acked-by: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
Acked-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Acked-by: Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
Acked-by: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
---
Changes for v2:
	- None
Changes for v3:
	- None
Changes for v4:
	- None
Changes for v5:
	- Changed to Move mpc85xx.h to include/linux/fsl/
	- Adjusted '#include <linux/fsl/svr.h>' position in file
Changes for v6:
	- None
Changes for v7:
	- Added 'Acked-by: Wolfram Sang' for I2C part
	- Also applied to arch/powerpc/kernel/cpu_setup_fsl_booke.S
Changes for v8:
	- Added 'Acked-by: Stephen Boyd' for clk part
	- Added 'Acked-by: Scott Wood'
	- Added 'Acked-by: Joerg Roedel' for iommu part
Changes for v9:
	- None
---
 arch/powerpc/kernel/cpu_setup_fsl_booke.S                     | 2 +-
 drivers/clk/clk-qoriq.c                                       | 3 +--
 drivers/i2c/busses/i2c-mpc.c                                  | 2 +-
 drivers/iommu/fsl_pamu.c                                      | 3 +--
 drivers/net/ethernet/freescale/gianfar.c                      | 2 +-
 arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h | 4 ++--
 6 files changed, 7 insertions(+), 9 deletions(-)
 rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)

diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 462aed9..2b0284e 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,13 +13,13 @@
  *
  */
 
+#include <linux/fsl/svr.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/mmu-book3e.h>
 #include <asm/asm-offsets.h>
-#include <asm/mpc85xx.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 7bc1c45..fc7f722 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -13,6 +13,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -1148,8 +1149,6 @@ bad_args:
 }
 
 #ifdef CONFIG_PPC
-#include <asm/mpc85xx.h>
-
 static const u32 a4510_svrs[] __initconst = {
 	(SVR_P2040 << 8) | 0x10,	/* P2040 1.0 */
 	(SVR_P2040 << 8) | 0x11,	/* P2040 1.1 */
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffe..600704c 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -27,9 +27,9 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/fsl/svr.h>
 
 #include <asm/mpc52xx.h>
-#include <asm/mpc85xx.h>
 #include <sysdev/fsl_soc.h>
 
 #define DRV_NAME "mpc-i2c"
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index a34355f..af8fb27 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -21,11 +21,10 @@
 #include "fsl_pamu.h"
 
 #include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
-#include <asm/mpc85xx.h>
-
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
 #define OMI_FMAN        0x01
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index d2f917a..2224b10 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -86,11 +86,11 @@
 #include <linux/udp.h>
 #include <linux/in.h>
 #include <linux/net_tstamp.h>
+#include <linux/fsl/svr.h>
 
 #include <asm/io.h>
 #ifdef CONFIG_PPC
 #include <asm/reg.h>
-#include <asm/mpc85xx.h>
 #endif
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/include/asm/mpc85xx.h b/include/linux/fsl/svr.h
similarity index 97%
rename from arch/powerpc/include/asm/mpc85xx.h
rename to include/linux/fsl/svr.h
index 213f3a8..8d13836 100644
--- a/arch/powerpc/include/asm/mpc85xx.h
+++ b/include/linux/fsl/svr.h
@@ -9,8 +9,8 @@
  * (at your option) any later version.
  */
 
-#ifndef __ASM_PPC_MPC85XX_H
-#define __ASM_PPC_MPC85XX_H
+#ifndef FSL_SVR_H
+#define FSL_SVR_H
 
 #define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
 #define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
-- 
2.1.0.27.g96db324

[v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver

[Yangbo Lu]

Add maintainer entry for Freescale SoC driver including
the QE library and the GUTS driver now. Also add maintainer
for QE library.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v8:
	- Added this patch
Changes for v9:
	- Added linux-arm mail list
	- Removed GUTS driver entry
---
 MAINTAINERS | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 42e65d1..ce91db7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4622,9 +4622,18 @@ F:	drivers/net/ethernet/freescale/fec_ptp.c
 F:	drivers/net/ethernet/freescale/fec.h
 F:	Documentation/devicetree/bindings/net/fsl-fec.txt
 
+FREESCALE SOC DRIVER
+M:	Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
+L:	linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
+L:	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
+S:	Maintained
+F:	drivers/soc/fsl/
+F:	include/linux/fsl/
+
 FREESCALE QUICC ENGINE LIBRARY
+M:	Qiang Zhao <qiang.zhao-3arQi8VN3Tc@public.gmane.org>
 L:	linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
-S:	Orphan
+S:	Maintained
 F:	drivers/soc/fsl/qe/
 F:	include/soc/fsl/*qe*.h
 F:	include/soc/fsl/*ucc*.h
-- 
2.1.0.27.g96db324

Re: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver

[Ulf Hansson]

On 4 May 2016 at 05:24, Yangbo Lu <yangbo.lu@nxp.com> wrote:
> Add maintainer entry for Freescale SoC driver including
> the QE library and the GUTS driver now. Also add maintainer
> for QE library.
>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

So I need an ack from Scott and Qiang for this one, then I intend to
queue up the series.

Kind regards
Uffe

> ---
> Changes for v8:
>         - Added this patch
> Changes for v9:
>         - Added linux-arm mail list
>         - Removed GUTS driver entry
> ---
>  MAINTAINERS | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 42e65d1..ce91db7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4622,9 +4622,18 @@ F:       drivers/net/ethernet/freescale/fec_ptp.c
>  F:     drivers/net/ethernet/freescale/fec.h
>  F:     Documentation/devicetree/bindings/net/fsl-fec.txt
>
> +FREESCALE SOC DRIVER
> +M:     Scott Wood <oss@buserror.net>
> +L:     linuxppc-dev@lists.ozlabs.org
> +L:     linux-arm-kernel@lists.infradead.org
> +S:     Maintained
> +F:     drivers/soc/fsl/
> +F:     include/linux/fsl/
> +
>  FREESCALE QUICC ENGINE LIBRARY
> +M:     Qiang Zhao <qiang.zhao@nxp.com>
>  L:     linuxppc-dev@lists.ozlabs.org
> -S:     Orphan
> +S:     Maintained
>  F:     drivers/soc/fsl/qe/
>  F:     include/soc/fsl/*qe*.h
>  F:     include/soc/fsl/*ucc*.h
> --
> 2.1.0.27.g96db324
>

Re: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver

[Scott Wood]

On Wed, 2016-05-04 at 11:24 +0800, Yangbo Lu wrote:
> Add maintainer entry for Freescale SoC driver including
> the QE library and the GUTS driver now. Also add maintainer
> for QE library.
> 
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> ---
> Changes for v8:
> 	- Added this patch
> Changes for v9:
> 	- Added linux-arm mail list
> 	- Removed GUTS driver entry
> ---
>  MAINTAINERS | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 42e65d1..ce91db7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4622,9 +4622,18 @@ F:	drivers/net/ethernet/freescale/fec_ptp.c
>  F:	drivers/net/ethernet/freescale/fec.h
>  F:	Documentation/devicetree/bindings/net/fsl-fec.txt
>  
> +FREESCALE SOC DRIVER
> +M:	Scott Wood <oss@buserror.net>
> +L:	linuxppc-dev@lists.ozlabs.org
> +L:	linux-arm-kernel@lists.infradead.org
> +S:	Maintained
> +F:	drivers/soc/fsl/
> +F:	include/linux/fsl/
> +
>  FREESCALE QUICC ENGINE LIBRARY
> +M:	Qiang Zhao <qiang.zhao@nxp.com>
>  L:	linuxppc-dev@lists.ozlabs.org
> -S:	Orphan
> +S:	Maintained
>  F:	drivers/soc/fsl/qe/
>  F:	include/soc/fsl/*qe*.h
>  F:	include/soc/fsl/*ucc*.h

s/DRIVER/DRIVERS/

There's more than one.

Otherwise:
Acked-by: Scott Wood <oss@buserror.net>

-Scott

> 

RE: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver

[Yangbo Lu]

Thanks a lot, Scott and Qiang.
Will change 'DRIVER' to 'DRIVERS' and update the patchset with your acts.


Best regards,
Yangbo Lu

> -----Original Message-----
> From: linux-mmc-owner@vger.kernel.org [mailto:linux-mmc-
> owner@vger.kernel.org] On Behalf Of Scott Wood
> Sent: Thursday, May 05, 2016 1:35 AM
> To: Yangbo Lu; linux-mmc@vger.kernel.org; linuxppc-dev@lists.ozlabs.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-clk@vger.kernel.org; linux-
> i2c@vger.kernel.org; iommu@lists.linux-foundation.org;
> netdev@vger.kernel.org
> Cc: ulf.hansson@linaro.org; Mark Rutland; Rob Herring; Russell King;
> Jochen Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh Sharma; Qiang
> Zhao; Kumar Gala; Santosh Shilimkar; Yang-Leo Li; Xiaobo Xie
> Subject: Re: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
> 
> On Wed, 2016-05-04 at 11:24 +0800, Yangbo Lu wrote:
> > Add maintainer entry for Freescale SoC driver including the QE library
> > and the GUTS driver now. Also add maintainer for QE library.
> >
> > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> > ---
> > Changes for v8:
> > 	- Added this patch
> > Changes for v9:
> > 	- Added linux-arm mail list
> > 	- Removed GUTS driver entry
> > ---
> >  MAINTAINERS | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index 42e65d1..ce91db7 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -4622,9 +4622,18 @@ F:	drivers/net/ethernet/freescale/fec_ptp.c
> >  F:	drivers/net/ethernet/freescale/fec.h
> >  F:	Documentation/devicetree/bindings/net/fsl-fec.txt
> >
> > +FREESCALE SOC DRIVER
> > +M:	Scott Wood <oss@buserror.net>
> > +L:	linuxppc-dev@lists.ozlabs.org
> > +L:	linux-arm-kernel@lists.infradead.org
> > +S:	Maintained
> > +F:	drivers/soc/fsl/
> > +F:	include/linux/fsl/
> > +
> >  FREESCALE QUICC ENGINE LIBRARY
> > +M:	Qiang Zhao <qiang.zhao@nxp.com>
> >  L:	linuxppc-dev@lists.ozlabs.org
> > -S:	Orphan
> > +S:	Maintained
> >  F:	drivers/soc/fsl/qe/
> >  F:	include/soc/fsl/*qe*.h
> >  F:	include/soc/fsl/*ucc*.h
> 
> s/DRIVER/DRIVERS/
> 
> There's more than one.
> 
> Otherwise:
> Acked-by: Scott Wood <oss@buserror.net>
> 
> -Scott
> 
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html

RE: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver

[Qiang Zhao]

On Wed, 2016-05-04 at 11:24 +0800, Yangbo Lu wrote:
> -----Original Message-----
> From: Yangbo Lu [mailto:yangbo.lu@nxp.com]
> Sent: Wednesday, May 04, 2016 11:25 AM
> To: linux-mmc@vger.kernel.org; linuxppc-dev@lists.ozlabs.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-clk@vger.kernel.org; linux-i2c@vger.kernel.org;
> iommu@lists.linux-foundation.org; netdev@vger.kernel.org
> Cc: ulf.hansson@linaro.org; Scott Wood <oss@buserror.net>; Mark Rutland
> <mark.rutland@arm.com>; Rob Herring <robh+dt@kernel.org>; Russell King
> <linux@arm.linux.org.uk>; Jochen Friedrich <jochen@scram.de>; Joerg Roedel
> <joro@8bytes.org>; Claudiu Manoil <claudiu.manoil@freescale.com>; Bhupesh
> Sharma <bhupesh.sharma@freescale.com>; Qiang Zhao
> <qiang.zhao@nxp.com>; Kumar Gala <galak@codeaurora.org>; Santosh
> Shilimkar <ssantosh@kernel.org>; Yang-Leo Li <leoyang.li@nxp.com>; Xiaobo
> Xie <xiaobo.xie@nxp.com>; Yangbo Lu <yangbo.lu@nxp.com>
> Subject: [v9, 6/7] MAINTAINERS: add entry for Freescale SoC driver
> 
> Add maintainer entry for Freescale SoC driver including the QE library and the
> GUTS driver now. Also add maintainer for QE library.
> 
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> ---
> Changes for v8:
> 	- Added this patch
> Changes for v9:
> 	- Added linux-arm mail list
> 	- Removed GUTS driver entry
> ---
>  MAINTAINERS | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 42e65d1..ce91db7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4622,9 +4622,18 @@ F:	drivers/net/ethernet/freescale/fec_ptp.c
>  F:	drivers/net/ethernet/freescale/fec.h
>  F:	Documentation/devicetree/bindings/net/fsl-fec.txt
> 
> +FREESCALE SOC DRIVER
> +M:	Scott Wood <oss@buserror.net>
> +L:	linuxppc-dev@lists.ozlabs.org
> +L:	linux-arm-kernel@lists.infradead.org
> +S:	Maintained
> +F:	drivers/soc/fsl/
> +F:	include/linux/fsl/
> +
>  FREESCALE QUICC ENGINE LIBRARY
> +M:	Qiang Zhao <qiang.zhao@nxp.com>
>  L:	linuxppc-dev@lists.ozlabs.org
> -S:	Orphan
> +S:	Maintained
>  F:	drivers/soc/fsl/qe/
>  F:	include/soc/fsl/*qe*.h
>  F:	include/soc/fsl/*ucc*.h
> --
> 2.1.0.27.g96db324

I am ok!

-Zhao Qiang

[v9, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0

[Yangbo Lu]

The eSDHC of T4240-R1.0-R2.0 has incorrect vender version and spec version.
Acturally the right version numbers should be VVN=0x13 and SVN = 0x1.
This patch adds the GUTS driver support for eSDHC driver to get SVR(System
version register). And fix host version to avoid that incorrect version
numbers break down the ADMA data transfer.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
Acked-by: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Scott Wood <oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org>
---
Changes for v2:
	- Got SVR through iomap instead of dts
Changes for v3:
	- Managed GUTS through syscon instead of iomap in eSDHC driver
Changes for v4:
	- Got SVR by GUTS driver instead of SYSCON
Changes for v5:
	- Changed to get SVR through API fsl_guts_get_svr()
	- Combined patch 4, patch 5 and patch 6 into one
Changes for v6:
	- Added 'Acked-by: Ulf Hansson'
Changes for v7:
	- None
Changes for v8:
	- Added 'Acked-by: Scott Wood'
Changes for v9:
	- None
---
 drivers/mmc/host/Kconfig          |  1 +
 drivers/mmc/host/sdhci-of-esdhc.c | 23 +++++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0aa484c..e15e836 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -143,6 +143,7 @@ config MMC_SDHCI_OF_ESDHC
 	depends on MMC_SDHCI_PLTFM
 	depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
 	select MMC_SDHCI_IO_ACCESSORS
+	select FSL_GUTS
 	help
 	  This selects the Freescale eSDHC controller support.
 
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 3f34d35..68cc020 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -18,6 +18,8 @@
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/fsl/svr.h>
+#include <linux/fsl/guts.h>
 #include <linux/mmc/host.h>
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -28,6 +30,8 @@
 struct sdhci_esdhc {
 	u8 vendor_ver;
 	u8 spec_ver;
+	u32 soc_ver;
+	u8 soc_rev;
 };
 
 /**
@@ -73,6 +77,8 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
 static u16 esdhc_readw_fixup(struct sdhci_host *host,
 				     int spec_reg, u32 value)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
 	u16 ret;
 	int shift = (spec_reg & 0x2) * 8;
 
@@ -80,6 +86,13 @@ static u16 esdhc_readw_fixup(struct sdhci_host *host,
 		ret = value & 0xffff;
 	else
 		ret = (value >> shift) & 0xffff;
+
+	/* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
+	 * vendor version and spec version information.
+	 */
+	if ((spec_reg == SDHCI_HOST_VERSION) &&
+	    (esdhc->soc_ver == SVR_T4240) && (esdhc->soc_rev <= 0x20))
+		ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
 	return ret;
 }
 
@@ -567,10 +580,20 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_esdhc *esdhc;
 	u16 host_ver;
+	u32 svr;
 
 	pltfm_host = sdhci_priv(host);
 	esdhc = sdhci_pltfm_priv(pltfm_host);
 
+	fsl_guts_init();
+	svr = fsl_guts_get_svr();
+	if (svr) {
+		esdhc->soc_ver = SVR_SOC_VER(svr);
+		esdhc->soc_rev = SVR_REV(svr);
+	} else {
+		dev_err(&pdev->dev, "Failed to get SVR value!\n");
+	}
+
 	host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
 	esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
 			     SDHCI_VENDOR_VER_SHIFT;
-- 
2.1.0.27.g96db324