* [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm
@ 2016-05-04 6:53 Weiqing Kong
2016-05-04 6:53 ` [PATCH 1/3] dt-bindings: pwm: Add MediaTek display PWM bindings Weiqing Kong
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-04 6:53 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang
These series patches modify pwm-mtk-disp.c
and dts/dtsi config to support MT2701 disp pwm.
Weiqing Kong (3):
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: Add MediaTek MT2701 display PWM driver support
dts: Add disp bls dsti and dts config for MT2701
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +-
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++-----
4 files changed, 113 insertions(+), 19 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 1/3] dt-bindings: pwm: Add MediaTek display PWM bindings
2016-05-04 6:53 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
@ 2016-05-04 6:53 ` Weiqing Kong
2016-05-04 6:53 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
2016-05-04 6:53 ` [PATCH 3/3] dts: Add disp bls dsti and dts config for MT2701 Weiqing Kong
2 siblings, 0 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-04 6:53 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang
Add MT2701 compatible string.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
index f8f59ba..f2f2fa9 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
@@ -1,9 +1,10 @@
MediaTek display PWM controller
Required properties:
- - compatible: should be "mediatek,<name>-disp-pwm":
- - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+ - compatible: should be like these:
+ - "mediatek,mt2701-disp-bls": found on mt2701 SoC.
- "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+ - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
- reg: physical base address and length of the controller's registers.
- #pwm-cells: must be 2. See pwm.txt in this directory for a description of
the cell format.
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-04 6:53 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-04 6:53 ` [PATCH 1/3] dt-bindings: pwm: Add MediaTek display PWM bindings Weiqing Kong
@ 2016-05-04 6:53 ` Weiqing Kong
2016-05-04 6:53 ` [PATCH 3/3] dts: Add disp bls dsti and dts config for MT2701 Weiqing Kong
2 siblings, 0 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-04 6:53 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang
Use the mtk_pwm_data struction to define different registers
and add MT2701 specific register operations, such as MT2701
doesn't have commit register, needs to disable double buffer
before writing register, and needs to select manual mode
and use PWM_PERIOD/PWM_HIGH_WIDTH.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 72 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385..03b9c9e 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,33 +18,44 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
-#define PWM_ENABLE_MASK BIT(0)
#define DISP_PWM_COMMIT 0x08
#define PWM_COMMIT_MASK BIT(0)
-#define DISP_PWM_CON_0 0x10
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
-#define DISP_PWM_CON_1 0x14
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
+#define MT2701_PWM_BLS_DEBUG 0xb0
+#define MT2701_PWM_BLS_DEBUG_MASK 0x3
+
+struct mtk_pwm_data {
+ unsigned int enable_bit;
+ unsigned int con0;
+ unsigned int con0_sel;
+ unsigned int con1;
+ bool have_commit_reg;
+};
+
struct mtk_disp_pwm {
struct pwm_chip chip;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
+ const struct mtk_pwm_data *data;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
- PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+ value);
+ if (mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x0);
+ }
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit,
+ mdp->data->enable_bit);
return 0;
}
@@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit, 0x0);
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct mtk_pwm_data mt8173_pwm_data = {
+ .enable_bit = BIT(0),
+ .con0 = 0x10,
+ .con0_sel = 0x0,
+ .con1 = 0x14,
+ .have_commit_reg = true,
+};
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+ .enable_bit = BIT(16),
+ .con0 = 0xa8,
+ .con0_sel = 0x2,
+ .con1 = 0xac,
+ .have_commit_reg = false,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
+ { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+ { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
struct mtk_disp_pwm *mdp;
struct resource *r;
int ret;
+ id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
@@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.base = -1;
mdp->chip.npwm = 1;
+ mdp->data = id->data;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
@@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mdp);
+ /*
+ * For MT2701, disable double buffer before writing register
+ * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+ */
+ if (!mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
+ MT2701_PWM_BLS_DEBUG_MASK, 0x3);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ MT2701_PWM_MANUAL_SEL_MASK,
+ mdp->data->con0_sel);
+ }
+
return 0;
disable_clk_mm:
@@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id mtk_disp_pwm_of_match[] = {
- { .compatible = "mediatek,mt8173-disp-pwm" },
- { .compatible = "mediatek,mt6595-disp-pwm" },
- { }
-};
-MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
-
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH 3/3] dts: Add disp bls dsti and dts config for MT2701
2016-05-04 6:53 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-04 6:53 ` [PATCH 1/3] dt-bindings: pwm: Add MediaTek display PWM bindings Weiqing Kong
2016-05-04 6:53 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
@ 2016-05-04 6:53 ` Weiqing Kong
2 siblings, 0 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-04 6:53 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..6d572f4 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -22,6 +22,35 @@
memory {
reg = <0 0x80000000 0 0x40000000>;
};
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&disp_bls 0 100000>;
+ brightness-levels = <
+ 0 16 32 48 64 80 96 112
+ 128 144 160 176 192 208 224 240
+ 255
+ >;
+ default-brightness-level = <9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_bls_gpio>;
+ };
+};
+
+&disp_bls {
+ status = "okay";
+};
+
+&mmsys {
+ status = "okay";
+};
+
+&pio {
+ pwm_bls_gpio: pwm_bls_gpio {
+ pins_cmd_dat {
+ pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+ };
+ };
};
&uart0 {
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 42d5a37..dae55d6 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -234,6 +234,15 @@
status = "disabled";
};
+ disp_bls: dispsys@1400a000 {
+ compatible = "mediatek,mt2701-disp-bls";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt2701-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm
@ 2016-05-16 8:14 Weiqing Kong
2016-05-16 8:14 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
0 siblings, 1 reply; 12+ messages in thread
From: Weiqing Kong @ 2016-05-16 8:14 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang, yt.shen
These series patches modify pwm-mtk-disp.c
and dts/dtsi config to support MT2701 disp pwm.
Weiqing Kong (3):
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: Add MediaTek MT2701 display PWM driver support
dts: Add disp bls dsti and dts config for MT2701
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +-
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++-----
4 files changed, 113 insertions(+), 19 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-16 8:14 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
@ 2016-05-16 8:14 ` Weiqing Kong
0 siblings, 0 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-16 8:14 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
yh.huang, yt.shen
Use the mtk_pwm_data struction to define different registers
and add MT2701 specific register operations, such as MT2701
doesn't have commit register, needs to disable double buffer
before writing register, and needs to select manual mode
and use PWM_PERIOD/PWM_HIGH_WIDTH.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 72 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385..03b9c9e 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,33 +18,44 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
-#define PWM_ENABLE_MASK BIT(0)
#define DISP_PWM_COMMIT 0x08
#define PWM_COMMIT_MASK BIT(0)
-#define DISP_PWM_CON_0 0x10
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
-#define DISP_PWM_CON_1 0x14
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
+#define MT2701_PWM_BLS_DEBUG 0xb0
+#define MT2701_PWM_BLS_DEBUG_MASK 0x3
+
+struct mtk_pwm_data {
+ unsigned int enable_bit;
+ unsigned int con0;
+ unsigned int con0_sel;
+ unsigned int con1;
+ bool have_commit_reg;
+};
+
struct mtk_disp_pwm {
struct pwm_chip chip;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
+ const struct mtk_pwm_data *data;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
- PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+ value);
+ if (mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x0);
+ }
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit,
+ mdp->data->enable_bit);
return 0;
}
@@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit, 0x0);
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct mtk_pwm_data mt8173_pwm_data = {
+ .enable_bit = BIT(0),
+ .con0 = 0x10,
+ .con0_sel = 0x0,
+ .con1 = 0x14,
+ .have_commit_reg = true,
+};
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+ .enable_bit = BIT(16),
+ .con0 = 0xa8,
+ .con0_sel = 0x2,
+ .con1 = 0xac,
+ .have_commit_reg = false,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
+ { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+ { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
struct mtk_disp_pwm *mdp;
struct resource *r;
int ret;
+ id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
@@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.base = -1;
mdp->chip.npwm = 1;
+ mdp->data = id->data;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
@@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mdp);
+ /*
+ * For MT2701, disable double buffer before writing register
+ * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+ */
+ if (!mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
+ MT2701_PWM_BLS_DEBUG_MASK, 0x3);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ MT2701_PWM_MANUAL_SEL_MASK,
+ mdp->data->con0_sel);
+ }
+
return 0;
disable_clk_mm:
@@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id mtk_disp_pwm_of_match[] = {
- { .compatible = "mediatek,mt8173-disp-pwm" },
- { .compatible = "mediatek,mt6595-disp-pwm" },
- { }
-};
-MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
-
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm
@ 2016-05-23 6:23 weiqing.kong
2016-05-23 6:23 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support weiqing.kong
0 siblings, 1 reply; 12+ messages in thread
From: weiqing.kong @ 2016-05-23 6:23 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
[-- Attachment #1: Type: text/plain, Size: 616 bytes --]
These series patches modify pwm-mtk-disp.c
and dts/dtsi config to support MT2701 disp pwm.
Weiqing Kong (3):
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: Add MediaTek MT2701 display PWM driver support
dts: Add disp bls dsti and dts config for MT2701
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +-
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++-----
4 files changed, 113 insertions(+), 19 deletions(-)
--
1.9.1
[-- Attachment #2: Type: text/html, Size: 1519 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-23 6:23 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm weiqing.kong
@ 2016-05-23 6:23 ` weiqing.kong
0 siblings, 0 replies; 12+ messages in thread
From: weiqing.kong @ 2016-05-23 6:23 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
[-- Attachment #1: Type: text/plain, Size: 5982 bytes --]
From: Weiqing Kong <weiqing.kong@mediatek.com>
Use the mtk_pwm_data struction to define different registers
and add MT2701 specific register operations, such as MT2701
doesn't have commit register, needs to disable double buffer
before writing register, and needs to select manual mode
and use PWM_PERIOD/PWM_HIGH_WIDTH.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++---------
1 file changed, 72 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385..03b9c9e 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,33 +18,44 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
-#define PWM_ENABLE_MASK BIT(0)
#define DISP_PWM_COMMIT 0x08
#define PWM_COMMIT_MASK BIT(0)
-#define DISP_PWM_CON_0 0x10
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
-#define DISP_PWM_CON_1 0x14
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
+#define MT2701_PWM_BLS_DEBUG 0xb0
+#define MT2701_PWM_BLS_DEBUG_MASK 0x3
+
+struct mtk_pwm_data {
+ unsigned int enable_bit;
+ unsigned int con0;
+ unsigned int con0_sel;
+ unsigned int con1;
+ bool have_commit_reg;
+};
+
struct mtk_disp_pwm {
struct pwm_chip chip;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
+ const struct mtk_pwm_data *data;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
- PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+ value);
+ if (mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x0);
+ }
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit,
+ mdp->data->enable_bit);
return 0;
}
@@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit, 0x0);
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct mtk_pwm_data mt8173_pwm_data = {
+ .enable_bit = BIT(0),
+ .con0 = 0x10,
+ .con0_sel = 0x0,
+ .con1 = 0x14,
+ .have_commit_reg = true,
+};
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+ .enable_bit = BIT(16),
+ .con0 = 0xa8,
+ .con0_sel = 0x2,
+ .con1 = 0xac,
+ .have_commit_reg = false,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
+ { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+ { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
struct mtk_disp_pwm *mdp;
struct resource *r;
int ret;
+ id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
@@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.base = -1;
mdp->chip.npwm = 1;
+ mdp->data = id->data;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
@@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mdp);
+ /*
+ * For MT2701, disable double buffer before writing register
+ * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+ */
+ if (!mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
+ MT2701_PWM_BLS_DEBUG_MASK, 0x3);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ MT2701_PWM_MANUAL_SEL_MASK,
+ mdp->data->con0_sel);
+ }
+
return 0;
disable_clk_mm:
@@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id mtk_disp_pwm_of_match[] = {
- { .compatible = "mediatek,mt8173-disp-pwm" },
- { .compatible = "mediatek,mt6595-disp-pwm" },
- { }
-};
-MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
-
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
--
1.7.9.5
[-- Attachment #2: Type: text/html, Size: 7148 bytes --]
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm
@ 2016-05-23 11:23 Weiqing Kong
2016-05-23 11:23 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
0 siblings, 1 reply; 12+ messages in thread
From: Weiqing Kong @ 2016-05-23 11:23 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
[-- Attachment #1: Type: text/plain, Size: 616 bytes --]
These series patches modify pwm-mtk-disp.c
and dts/dtsi config to support MT2701 disp pwm.
Weiqing Kong (3):
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: Add MediaTek MT2701 display PWM driver support
dts: Add disp bls dsti and dts config for MT2701
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +-
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++-----
4 files changed, 113 insertions(+), 19 deletions(-)
--
1.9.1
[-- Attachment #2: Type: text/html, Size: 1519 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-23 11:23 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
@ 2016-05-23 11:23 ` Weiqing Kong
0 siblings, 0 replies; 12+ messages in thread
From: Weiqing Kong @ 2016-05-23 11:23 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
[-- Attachment #1: Type: text/plain, Size: 5938 bytes --]
Use the mtk_pwm_data struction to define different registers
and add MT2701 specific register operations, such as MT2701
doesn't have commit register, needs to disable double buffer
before writing register, and needs to select manual mode
and use PWM_PERIOD/PWM_HIGH_WIDTH.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 72 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385..03b9c9e 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,33 +18,44 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
-#define PWM_ENABLE_MASK BIT(0)
#define DISP_PWM_COMMIT 0x08
#define PWM_COMMIT_MASK BIT(0)
-#define DISP_PWM_CON_0 0x10
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
-#define DISP_PWM_CON_1 0x14
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
+#define MT2701_PWM_BLS_DEBUG 0xb0
+#define MT2701_PWM_BLS_DEBUG_MASK 0x3
+
+struct mtk_pwm_data {
+ unsigned int enable_bit;
+ unsigned int con0;
+ unsigned int con0_sel;
+ unsigned int con1;
+ bool have_commit_reg;
+};
+
struct mtk_disp_pwm {
struct pwm_chip chip;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
+ const struct mtk_pwm_data *data;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
- PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+ value);
+ if (mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x0);
+ }
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit,
+ mdp->data->enable_bit);
return 0;
}
@@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit, 0x0);
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct mtk_pwm_data mt8173_pwm_data = {
+ .enable_bit = BIT(0),
+ .con0 = 0x10,
+ .con0_sel = 0x0,
+ .con1 = 0x14,
+ .have_commit_reg = true,
+};
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+ .enable_bit = BIT(16),
+ .con0 = 0xa8,
+ .con0_sel = 0x2,
+ .con1 = 0xac,
+ .have_commit_reg = false,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
+ { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+ { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
struct mtk_disp_pwm *mdp;
struct resource *r;
int ret;
+ id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
@@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.base = -1;
mdp->chip.npwm = 1;
+ mdp->data = id->data;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
@@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mdp);
+ /*
+ * For MT2701, disable double buffer before writing register
+ * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+ */
+ if (!mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
+ MT2701_PWM_BLS_DEBUG_MASK, 0x3);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ MT2701_PWM_MANUAL_SEL_MASK,
+ mdp->data->con0_sel);
+ }
+
return 0;
disable_clk_mm:
@@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id mtk_disp_pwm_of_match[] = {
- { .compatible = "mediatek,mt8173-disp-pwm" },
- { .compatible = "mediatek,mt6595-disp-pwm" },
- { }
-};
-MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
-
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
--
1.8.1.1.dirty
[-- Attachment #2: Type: text/html, Size: 7098 bytes --]
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH RESEND 0/3] Support Mediatek Soc MT2701 disp pwm
@ 2016-05-30 8:41 Weiqing Kong
2016-05-30 8:41 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
0 siblings, 1 reply; 12+ messages in thread
From: Weiqing Kong @ 2016-05-30 8:41 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
Sorry for sending many times, because of company
permission settings, many people and groups can't
receive these patches before.
These series patches modify pwm-mtk-disp.c
and dts/dtsi config to support MT2701 disp pwm.
Weiqing Kong (3):
dt-bindings: pwm: Add MediaTek display PWM bindings
pwm: Add MediaTek MT2701 display PWM driver support
dts: Add disp bls dsti and dts config for MT2701
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 5 +-
arch/arm/boot/dts/mt2701-evb.dts | 29 +++++++
arch/arm/boot/dts/mt2701.dtsi | 9 +++
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++-----
4 files changed, 113 insertions(+), 19 deletions(-)
--
1.8.1.1.dirty
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-30 8:41 [PATCH RESEND 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
@ 2016-05-30 8:41 ` Weiqing Kong
2016-06-03 15:35 ` Matthias Brugger
0 siblings, 1 reply; 12+ messages in thread
From: Weiqing Kong @ 2016-05-30 8:41 UTC (permalink / raw)
To: Thierry Reding, Mark Rutland, Matthias Brugger, weiqing.kong
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
Use the mtk_pwm_data struction to define different registers
and add MT2701 specific register operations, such as MT2701
doesn't have commit register, needs to disable double buffer
before writing register, and needs to select manual mode
and use PWM_PERIOD/PWM_HIGH_WIDTH.
Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++++---------
1 file changed, 72 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385..03b9c9e 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,33 +18,44 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#define DISP_PWM_EN 0x00
-#define PWM_ENABLE_MASK BIT(0)
#define DISP_PWM_COMMIT 0x08
#define PWM_COMMIT_MASK BIT(0)
-#define DISP_PWM_CON_0 0x10
#define PWM_CLKDIV_SHIFT 16
#define PWM_CLKDIV_MAX 0x3ff
#define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
-#define DISP_PWM_CON_1 0x14
#define PWM_PERIOD_BIT_WIDTH 12
#define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
#define PWM_HIGH_WIDTH_SHIFT 16
#define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
+#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
+#define MT2701_PWM_BLS_DEBUG 0xb0
+#define MT2701_PWM_BLS_DEBUG_MASK 0x3
+
+struct mtk_pwm_data {
+ unsigned int enable_bit;
+ unsigned int con0;
+ unsigned int con0_sel;
+ unsigned int con1;
+ bool have_commit_reg;
+};
+
struct mtk_disp_pwm {
struct pwm_chip chip;
struct clk *clk_main;
struct clk *clk_mm;
void __iomem *base;
+ const struct mtk_pwm_data *data;
};
static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ PWM_CLKDIV_MASK,
clk_div << PWM_CLKDIV_SHIFT);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
- PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+ PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+ value);
+ if (mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
+ PWM_COMMIT_MASK, 0x0);
+ }
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
return err;
}
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit,
+ mdp->data->enable_bit);
return 0;
}
@@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
- mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+ mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
+ mdp->data->enable_bit, 0x0);
clk_disable(mdp->clk_mm);
clk_disable(mdp->clk_main);
@@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct mtk_pwm_data mt8173_pwm_data = {
+ .enable_bit = BIT(0),
+ .con0 = 0x10,
+ .con0_sel = 0x0,
+ .con1 = 0x14,
+ .have_commit_reg = true,
+};
+
+static const struct mtk_pwm_data mt2701_pwm_data = {
+ .enable_bit = BIT(16),
+ .con0 = 0xa8,
+ .con0_sel = 0x2,
+ .con1 = 0xac,
+ .have_commit_reg = false,
+};
+
+static const struct of_device_id mtk_disp_pwm_of_match[] = {
+ { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
+ { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+ { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
+
static int mtk_disp_pwm_probe(struct platform_device *pdev)
{
+ const struct of_device_id *id;
struct mtk_disp_pwm *mdp;
struct resource *r;
int ret;
+ id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
+ if (!id)
+ return -EINVAL;
+
mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
if (!mdp)
return -ENOMEM;
@@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
mdp->chip.ops = &mtk_disp_pwm_ops;
mdp->chip.base = -1;
mdp->chip.npwm = 1;
+ mdp->data = id->data;
ret = pwmchip_add(&mdp->chip);
if (ret < 0) {
@@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mdp);
+ /*
+ * For MT2701, disable double buffer before writing register
+ * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+ */
+ if (!mdp->data->have_commit_reg) {
+ mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
+ MT2701_PWM_BLS_DEBUG_MASK, 0x3);
+ mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+ MT2701_PWM_MANUAL_SEL_MASK,
+ mdp->data->con0_sel);
+ }
+
return 0;
disable_clk_mm:
@@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
return ret;
}
-static const struct of_device_id mtk_disp_pwm_of_match[] = {
- { .compatible = "mediatek,mt8173-disp-pwm" },
- { .compatible = "mediatek,mt6595-disp-pwm" },
- { }
-};
-MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
-
static struct platform_driver mtk_disp_pwm_driver = {
.driver = {
.name = "mediatek-disp-pwm",
--
1.8.1.1.dirty
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support
2016-05-30 8:41 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
@ 2016-06-03 15:35 ` Matthias Brugger
[not found] ` <5751A3DD.7020402-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 12+ messages in thread
From: Matthias Brugger @ 2016-06-03 15:35 UTC (permalink / raw)
To: Weiqing Kong, Thierry Reding, Mark Rutland
Cc: Rob Herring, Pawel Moll, Ian Campbell, Kumar Gala, Russell King,
linux-pwm, devicetree, linux-arm-kernel, linux-mediatek,
linux-kernel, srv_heupstream, Sascha Hauer, erin.lo, yingjoe.chen,
eddie.huang, yh.huang, yt.shen
On 30/05/16 10:41, Weiqing Kong wrote:
> Use the mtk_pwm_data struction to define different registers
> and add MT2701 specific register operations, such as MT2701
> doesn't have commit register, needs to disable double buffer
> before writing register, and needs to select manual mode
> and use PWM_PERIOD/PWM_HIGH_WIDTH.
>
> Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com>
> ---
> drivers/pwm/pwm-mtk-disp.c | 89 +++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 72 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
> index 0ad3385..03b9c9e 100644
> --- a/drivers/pwm/pwm-mtk-disp.c
> +++ b/drivers/pwm/pwm-mtk-disp.c
> @@ -18,33 +18,44 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> #include <linux/slab.h>
>
> #define DISP_PWM_EN 0x00
> -#define PWM_ENABLE_MASK BIT(0)
>
> #define DISP_PWM_COMMIT 0x08
> #define PWM_COMMIT_MASK BIT(0)
>
> -#define DISP_PWM_CON_0 0x10
> #define PWM_CLKDIV_SHIFT 16
> #define PWM_CLKDIV_MAX 0x3ff
> #define PWM_CLKDIV_MASK (PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
>
> -#define DISP_PWM_CON_1 0x14
> #define PWM_PERIOD_BIT_WIDTH 12
> #define PWM_PERIOD_MASK ((1 << PWM_PERIOD_BIT_WIDTH) - 1)
>
> #define PWM_HIGH_WIDTH_SHIFT 16
> #define PWM_HIGH_WIDTH_MASK (0x1fff << PWM_HIGH_WIDTH_SHIFT)
>
> +#define MT2701_PWM_MANUAL_SEL_MASK BIT(1)
> +#define MT2701_PWM_BLS_DEBUG 0xb0
Do we need to set magic 0x3 in the debug register? If so, this should be
part of mtk_pwm_data, just as con0_sel.
> +#define MT2701_PWM_BLS_DEBUG_MASK 0x3
> +
> +struct mtk_pwm_data {
> + unsigned int enable_bit;
> + unsigned int con0;
> + unsigned int con0_sel;
> + unsigned int con1;
> + bool have_commit_reg;
> +};
> +
> struct mtk_disp_pwm {
> struct pwm_chip chip;
> struct clk *clk_main;
> struct clk *clk_mm;
> void __iomem *base;
> + const struct mtk_pwm_data *data;
Couldn't that just be the offset for the commit register and set it to
0x0 if the commit register is not present. Right now, we suppose the
DISP_PWM_EN is at offset 0x0, so this should not be a problem.
> };
>
> static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
> @@ -106,12 +117,18 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> return err;
> }
>
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
> + mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> + PWM_CLKDIV_MASK,
> clk_div << PWM_CLKDIV_SHIFT);
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
> - PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
> + mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
> + PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
> + value);
> + if (mdp->data->have_commit_reg) {
> + mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
> + PWM_COMMIT_MASK, 0x1);
> + mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT,
> + PWM_COMMIT_MASK, 0x0);
should be renamed to MT8173_PWM_COMMIT_MASK, although I'm not really a
friend of mixing up SoC specific defines with a Soc specific
mtk_disp_pwm structure.
Regards,
Matthias
> + }
>
> clk_disable(mdp->clk_mm);
> clk_disable(mdp->clk_main);
> @@ -134,7 +151,9 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> return err;
> }
>
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
> + mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
> + mdp->data->enable_bit,
> + mdp->data->enable_bit);
>
> return 0;
> }
> @@ -143,7 +162,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> {
> struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
>
> - mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
> + mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN,
> + mdp->data->enable_bit, 0x0);
>
> clk_disable(mdp->clk_mm);
> clk_disable(mdp->clk_main);
> @@ -156,12 +176,41 @@ static const struct pwm_ops mtk_disp_pwm_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct mtk_pwm_data mt8173_pwm_data = {
> + .enable_bit = BIT(0),
> + .con0 = 0x10,
> + .con0_sel = 0x0,
> + .con1 = 0x14,
> + .have_commit_reg = true,
> +};
> +
> +static const struct mtk_pwm_data mt2701_pwm_data = {
> + .enable_bit = BIT(16),
> + .con0 = 0xa8,
> + .con0_sel = 0x2,
> + .con1 = 0xac,
> + .have_commit_reg = false,
> +};
> +
> +static const struct of_device_id mtk_disp_pwm_of_match[] = {
> + { .compatible = "mediatek,mt2701-disp-bls", .data = &mt2701_pwm_data},
> + { .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
> + { .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
> +
> static int mtk_disp_pwm_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *id;
> struct mtk_disp_pwm *mdp;
> struct resource *r;
> int ret;
>
> + id = of_match_device(mtk_disp_pwm_of_match, &pdev->dev);
> + if (!id)
> + return -EINVAL;
> +
> mdp = devm_kzalloc(&pdev->dev, sizeof(*mdp), GFP_KERNEL);
> if (!mdp)
> return -ENOMEM;
> @@ -191,6 +240,7 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
> mdp->chip.ops = &mtk_disp_pwm_ops;
> mdp->chip.base = -1;
> mdp->chip.npwm = 1;
> + mdp->data = id->data;
>
> ret = pwmchip_add(&mdp->chip);
> if (ret < 0) {
> @@ -200,6 +250,18 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, mdp);
>
> + /*
> + * For MT2701, disable double buffer before writing register
> + * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
> + */
> + if (!mdp->data->have_commit_reg) {
> + mtk_disp_pwm_update_bits(mdp, MT2701_PWM_BLS_DEBUG,
> + MT2701_PWM_BLS_DEBUG_MASK, 0x3);
> + mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> + MT2701_PWM_MANUAL_SEL_MASK,
> + mdp->data->con0_sel);
> + }
> +
> return 0;
>
> disable_clk_mm:
> @@ -221,13 +283,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
> return ret;
> }
>
> -static const struct of_device_id mtk_disp_pwm_of_match[] = {
> - { .compatible = "mediatek,mt8173-disp-pwm" },
> - { .compatible = "mediatek,mt6595-disp-pwm" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
> -
> static struct platform_driver mtk_disp_pwm_driver = {
> .driver = {
> .name = "mediatek-disp-pwm",
>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2016-06-08 12:05 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-04 6:53 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-04 6:53 ` [PATCH 1/3] dt-bindings: pwm: Add MediaTek display PWM bindings Weiqing Kong
2016-05-04 6:53 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
2016-05-04 6:53 ` [PATCH 3/3] dts: Add disp bls dsti and dts config for MT2701 Weiqing Kong
-- strict thread matches above, loose matches on Subject: below --
2016-05-16 8:14 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-16 8:14 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
2016-05-23 6:23 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm weiqing.kong
2016-05-23 6:23 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support weiqing.kong
2016-05-23 11:23 [PATCH 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-23 11:23 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
2016-05-30 8:41 [PATCH RESEND 0/3] Support Mediatek Soc MT2701 disp pwm Weiqing Kong
2016-05-30 8:41 ` [PATCH 2/3] pwm: Add MediaTek MT2701 display PWM driver support Weiqing Kong
2016-06-03 15:35 ` Matthias Brugger
[not found] ` <5751A3DD.7020402-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-06-08 7:21 ` weiqing kong
2016-06-08 11:22 ` Matthias Brugger
2016-06-08 12:05 ` weiqing kong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).