devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi
Date: Sun,  8 May 2016 21:05:58 +0200	[thread overview]
Message-ID: <1462734367-5619-14-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1462734367-5619-1-git-send-email-krzk@kernel.org>

Exynos5420 and Exynos5250 share some nodes: the PWM and syscon
(sysreg_system_controller). Move them to parent DTSI to avoid
duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/exynos5.dtsi    | 12 ++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi | 19 +++++--------------
 arch/arm/boot/dts/exynos5420.dtsi | 19 +++++--------------
 3 files changed, 22 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d5c0f18a4223..fe901152f3ea 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -63,6 +63,11 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
 	serial_0: serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -87,6 +92,13 @@
 		interrupts = <0 54 0>;
 	};
 
+	pwm: pwm@12DD0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12DD0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+	};
+
 	rtc: rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index c7158b2fb213..6762faaf12a8 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -235,11 +235,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	watchdog@101D0000 {
 		compatible = "samsung,exynos5250-wdt";
 		reg = <0x101D0000 0x100>;
@@ -662,15 +657,6 @@
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1070,6 +1056,11 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 4c8523471c65..f7322d87095f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -542,15 +542,6 @@
 		status = "disabled";
 	};
 
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	dp_phy: dp-video-phy {
 		compatible = "samsung,exynos5420-dp-video-phy";
 		samsung,pmu-syscon = <&pmu_system_controller>;
@@ -823,11 +814,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	tmu_cpu0: tmu@10060000 {
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10060000 0x100>;
@@ -1207,6 +1193,11 @@
 	iommu-names = "m0", "m1";
 };
 
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
-- 
2.5.0

  parent reply	other threads:[~2016-05-08 19:05 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-08 19:05 [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-08 19:05 ` [PATCH v2 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-09 19:37   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-09 19:41   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 03/22] ARM: dts: exynos: Add fin_pll node for clock driver Krzysztof Kozlowski
2016-05-09 19:53   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 04/22] clk: samsung: exynos5410: Provide fin_pll external fixed clock Krzysztof Kozlowski
2016-05-09 20:19   ` Javier Martinez Canillas
2016-05-10  5:26     ` Krzysztof Kozlowski
2016-05-08 19:05 ` [PATCH v2 05/22] ARM: dts: exynos: Switch MCT node to a new fin_pll clock Krzysztof Kozlowski
2016-05-09 20:22   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 06/22] ARM: dts: exynos: Remove old fixed-clock provider on SMDK5410 Krzysztof Kozlowski
2016-05-09 20:24   ` Javier Martinez Canillas
2016-05-10  5:27     ` Krzysztof Kozlowski
2016-05-08 19:05 ` [PATCH v2 07/22] clk: samsung: exynos5410: Rename fin_pll from temporary to regular name Krzysztof Kozlowski
     [not found]   ` <1462734367-5619-8-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-05-09 20:25     ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 08/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-09 20:50   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 09/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
     [not found]   ` <1462734367-5619-10-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-05-09 20:52     ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 10/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-09 20:54   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 11/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-09 20:58   ` Javier Martinez Canillas
2016-05-08 19:05 ` [PATCH v2 12/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-09 20:59   ` Javier Martinez Canillas
2016-05-08 19:05 ` Krzysztof Kozlowski [this message]
2016-05-09 21:25   ` [PATCH v2 13/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi Javier Martinez Canillas
2016-05-10  5:30     ` Krzysztof Kozlowski
2016-05-08 19:05 ` [PATCH v2 14/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-09 21:27   ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 15/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
     [not found]   ` <1462734367-5619-16-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-05-09 21:29     ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 16/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-09 21:35   ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 17/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-09 21:39   ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 18/22] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-05-09 21:40   ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 19/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
     [not found]   ` <1462734367-5619-20-git-send-email-krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-05-09 21:44     ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 20/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-09 21:53   ` Javier Martinez Canillas
2016-05-10  5:33     ` Krzysztof Kozlowski
2016-05-10 12:51       ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 21/22] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-09 21:55   ` Javier Martinez Canillas
2016-05-08 19:06 ` [PATCH v2 22/22] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-09 20:09   ` Rob Herring
2016-05-09 22:02   ` Javier Martinez Canillas
     [not found]     ` <cbcb5657-8825-83cf-688f-d565ac7ecbab-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>
2016-05-10  5:35       ` Krzysztof Kozlowski
2016-05-09 22:00 ` [PATCH v2 00/22] ARM: dts: exynos: Add initial support for Odroid XU Stephen Boyd
2016-05-09 22:05 ` Javier Martinez Canillas
2016-05-10  5:13   ` Krzysztof Kozlowski
2016-05-10 14:00     ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462734367-5619-14-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=javier@osg.samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).