From mboxrd@z Thu Jan 1 00:00:00 1970 From: kernel@martin.sperl.org Subject: [PATCH 1/4] dt: bindings: add thermal device driver for bcm2835 Date: Thu, 12 May 2016 14:35:35 +0000 Message-ID: <1463063738-11506-2-git-send-email-kernel@martin.sperl.org> References: <1463063738-11506-1-git-send-email-kernel@martin.sperl.org> Return-path: In-Reply-To: <1463063738-11506-1-git-send-email-kernel@martin.sperl.org> Sender: linux-pm-owner@vger.kernel.org To: Zhang Rui , Eduardo Valentin , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Lee Jones , Eric Anholt , Russell King , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org Cc: Martin Sperl List-Id: devicetree@vger.kernel.org From: Martin Sperl Add documentation for bcm2835 SOC thermal sensor. Signed-off-by: Martin Sperl --- .../devicetree/bindings/thermal/bcm2835-thermal.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt diff --git a/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt new file mode 100644 index 0000000..607519a --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt @@ -0,0 +1,16 @@ +Binding for Thermal Sensor driver for BCM2835 SoCs. + +Required parameters: +------------------- + +compatible : should be: "brcm,bcm2835-thermal" +reg : Address range of the thermal registers. +clocks : Phandle of the clock used by the thermal sensor. + +Example: + +thermal: thermal@0x7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; +}; -- 2.1.4