[PATCH] MIPS: devicetree: fix cpu interrupt controller node-names

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Antony Pavlov <antonynpavlov@gmail.com>
To: linux-mips@linux-mips.org
Cc: Ralf Baechle <ralf@linux-mips.org>,
	Paul Burton <paul.burton@imgtec.com>,
	Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] MIPS: devicetree: fix cpu interrupt controller node-names
Date: Mon, 23 May 2016 14:39:00 +0300	[thread overview]
Message-ID: <1464003540-13009-1-git-send-email-antonynpavlov@gmail.com> (raw)

Here is the quote from [1]:

    The unit-address must match the first address specified
    in the reg property of the node. If the node has no reg property,
    the @ and unit-address must be omitted and the node-name alone
    differentiates the node from other nodes at the same level

This patch adjusts MIPS dts-files and devicetree binding
documentation in accordance with [1].

    [1] Power.org(tm) Standard for Embedded Power Architecture(tm)
        Platform Requirements (ePAPR). Version 1.1 – 08 April 2011.
        Chapter 2.2.1.1 Node Name Requirements

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 Documentation/devicetree/bindings/mips/cpu_irq.txt | 2 +-
 arch/mips/boot/dts/ingenic/jz4740.dtsi             | 2 +-
 arch/mips/boot/dts/ralink/mt7620a.dtsi             | 2 +-
 arch/mips/boot/dts/ralink/rt2880.dtsi              | 2 +-
 arch/mips/boot/dts/ralink/rt3050.dtsi              | 2 +-
 arch/mips/boot/dts/ralink/rt3883.dtsi              | 2 +-
 arch/mips/boot/dts/xilfpga/nexys4ddr.dts           | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
index fc149f3..f080f06 100644
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -13,7 +13,7 @@ Required properties:
 - compatible : Should be "mti,cpu-interrupt-controller"
 
 Example devicetree:
-	cpu-irq: cpu-irq@0 {
+	cpu-irq: cpu-irq {
 		#address-cells = <0>;
 
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 4a9c8f2..f6ae6ed 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -5,7 +5,7 @@
 	#size-cells = <1>;
 	compatible = "ingenic,jz4740";
 
-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
index 08bf24f..793c0c7 100644
--- a/arch/mips/boot/dts/ralink/mt7620a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
index 182afde..fb2faef 100644
--- a/arch/mips/boot/dts/ralink/rt2880.dtsi
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
index e3203d4..d3cb57f 100644
--- a/arch/mips/boot/dts/ralink/rt3050.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
index 3b131dd..3d6fc9a 100644
--- a/arch/mips/boot/dts/ralink/rt3883.dtsi
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@@ -9,7 +9,7 @@
 		};
 	};
 
-	cpuintc: cpuintc@0 {
+	cpuintc: cpuintc {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
index 686ebd1..48d2112 100644
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -10,7 +10,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	cpuintc: interrupt-controller@0 {
+	cpuintc: interrupt-controller {
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
-- 
2.7.0

next             reply	other threads:[~2016-05-23 11:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-23 11:39 Antony Pavlov [this message]
2016-05-23 15:47 ` [PATCH] MIPS: devicetree: fix cpu interrupt controller node-names Rob Herring
2016-05-24 11:43   ` Antony Pavlov

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:fc149f3 dfblob:f080f06 dfblob:4a9c8f2 dfblob:f6ae6ed
dfblob:08bf24f dfblob:793c0c7 dfblob:182afde dfblob:fb2faef
dfblob:e3203d4 dfblob:d3cb57f dfblob:3b131dd dfblob:3d6fc9a
dfblob:686ebd1 dfblob:48d2112 )
 OR (
bs:"[PATCH] MIPS: devicetree: fix cpu interrupt controller node-names" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464003540-13009-1-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=Zubair.Kakakhel@imgtec.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=mark.rutland@arm.com \
    --cc=paul.burton@imgtec.com \
    --cc=pawel.moll@arm.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).