From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlo Caione Subject: [PATCH v4 0/3] Add Amlogic secure monitor driver Date: Wed, 25 May 2016 22:18:28 +0200 Message-ID: <1464207511-11786-1-git-send-email-carlo@caione.org> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-6IF/jdPJHihWk0Htik3J/w@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Cc: Carlo Caione List-Id: devicetree@vger.kernel.org From: Carlo Caione In the Amlogic SoCs the secure monitor calls are used for a lot of reasons: interact with the NVMEM (efuses), check the reboot reason, set USB boot, ... This driver defines a generic interface towards the secure monitor that can be used by more specialized drivers to interact with the secure monitor itself without worrying about bounce buffers managing. Changelog: v4: * Changed patches order * Removed now useless PATCH 2/4 * Changed compatible to be SoC-specific * In the DT now we use SoC-agnostic IDs for the SMC functions. These IDs are traslated into SoC specific function IDs inside the driver * Added error checking on meson_sm_call() to retrieve the base address * Improved printing on errors v3: * Moved driver to drivers/firmware * Added EXPORT_SYMBOL macros * Changed '_' in '-' * Introduced 'struct meson_sm_firmware' and 'meson_sm_get_fw()' to be used by drivers using the secure-monitor to enforce probe ordering v2: * All the SMC function identifiers are now in a SoC-specific header file to be included by the DTS files so the SMC commands are now defined in the DT instead to be hardcoded into the driver * Patchset is no longer an RFC * Better error management and boundary checking * s/unsigned int/u32/ * SMC call not only on CPU 0 * Fix memory leaking * s/amlogic/meson/ in the directory names Carlo Caione (3): firmware: Amlogic: Add secure monitor driver documentation: Add secure monitor binding documentation ARM64: dts: amlogic: gxbb: Enable secure monitor .../bindings/firmware/meson/meson_sm.txt | 42 +++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 9 + drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/meson/Kconfig | 8 + drivers/firmware/meson/Makefile | 1 + drivers/firmware/meson/meson_sm.c | 193 +++++++++++++++++++++ include/dt-bindings/firmware/meson-sm.h | 20 +++ include/linux/firmware/meson/meson-sm.h | 49 ++++++ 9 files changed, 324 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt create mode 100644 drivers/firmware/meson/Kconfig create mode 100644 drivers/firmware/meson/Makefile create mode 100644 drivers/firmware/meson/meson_sm.c create mode 100644 include/dt-bindings/firmware/meson-sm.h create mode 100644 include/linux/firmware/meson/meson-sm.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html