devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Michael Turquette
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Simon Horman
	<horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
	Magnus Damm
	<damm+renesas-yzvPICuk2ACczHhG9Qg4qA@public.gmane.org>,
	Laurent Pinchart
	<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Geert Uytterhoeven
	<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v2 4/4] clk: renesas: cpg-mssr: Add support for R-Car M3-W
Date: Mon, 30 May 2016 18:28:57 +0200	[thread overview]
Message-ID: <1464625737-6646-5-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1464625737-6646-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>

Initial support for R-Car M3-W (r8a7796), including basic core clocks,
and SCIF2 (console) and INTC-AP (GIC) module clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Tested-by: Simon Horman <horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
---
v2:
  - Add Tested-by.
---
 drivers/clk/renesas/Kconfig            |   1 +
 drivers/clk/renesas/Makefile           |   1 +
 drivers/clk/renesas/r8a7796-cpg-mssr.c | 192 +++++++++++++++++++++++++++++++++
 drivers/clk/renesas/renesas-cpg-mssr.c |   6 ++
 drivers/clk/renesas/renesas-cpg-mssr.h |   1 +
 5 files changed, 201 insertions(+)
 create mode 100644 drivers/clk/renesas/r8a7796-cpg-mssr.c

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 2115ce410cfb4bc9..fcad9ff090f5fd2b 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -1,6 +1,7 @@
 config CLK_RENESAS_CPG_MSSR
 	bool
 	default y if ARCH_R8A7795
+	default y if ARCH_R8A7796
 
 config CLK_RENESAS_CPG_MSTP
 	bool
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index 88924c95808c3b2e..0b8d31b4909c9690 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o clk-div6.o
 obj-$(CONFIG_ARCH_R8A7795)		+= r8a7795-cpg-mssr.o rcar-gen3-cpg.o
+obj-$(CONFIG_ARCH_R8A7796)		+= r8a7796-cpg-mssr.o rcar-gen3-cpg.o
 obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o clk-div6.o
 
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o clk-div6.o
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
new file mode 100644
index 0000000000000000..c84b549c14d2e57d
--- /dev/null
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -0,0 +1,192 @@
+/*
+ * r8a7796 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A7796_CLK_OSC,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+	CLK_EXTALR,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL2,
+	CLK_PLL3,
+	CLK_PLL4,
+	CLK_PLL1_DIV2,
+	CLK_PLL1_DIV4,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",  CLK_EXTAL),
+	DEF_INPUT("extalr", CLK_EXTALR),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll0",       CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN),
+	DEF_BASE(".pll1",       CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN),
+	DEF_BASE(".pll2",       CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN),
+	DEF_BASE(".pll3",       CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN),
+	DEF_BASE(".pll4",       CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN),
+
+	DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2,     CLK_PLL1,       2, 1),
+	DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4,     CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s0",        CLK_S0,            CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED(".s1",        CLK_S1,            CLK_PLL1_DIV2,  3, 1),
+	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("ztr",        R8A7796_CLK_ZTR,   CLK_PLL1_DIV2,  6, 1),
+	DEF_FIXED("ztrd2",      R8A7796_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+	DEF_FIXED("zt",         R8A7796_CLK_ZT,    CLK_PLL1_DIV2,  4, 1),
+	DEF_FIXED("zx",         R8A7796_CLK_ZX,    CLK_PLL1_DIV2,  2, 1),
+	DEF_FIXED("s0d1",       R8A7796_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s0d2",       R8A7796_CLK_S0D2,  CLK_S0,         2, 1),
+	DEF_FIXED("s0d3",       R8A7796_CLK_S0D3,  CLK_S0,         3, 1),
+	DEF_FIXED("s0d4",       R8A7796_CLK_S0D4,  CLK_S0,         4, 1),
+	DEF_FIXED("s0d6",       R8A7796_CLK_S0D6,  CLK_S0,         6, 1),
+	DEF_FIXED("s0d8",       R8A7796_CLK_S0D8,  CLK_S0,         8, 1),
+	DEF_FIXED("s0d12",      R8A7796_CLK_S0D12, CLK_S0,        12, 1),
+	DEF_FIXED("s1d1",       R8A7796_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",       R8A7796_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",       R8A7796_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",       R8A7796_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",       R8A7796_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",       R8A7796_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",       R8A7796_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",       R8A7796_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",       R8A7796_CLK_S3D4,  CLK_S3,         4, 1),
+
+	DEF_FIXED("cl",         R8A7796_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cp",         R8A7796_CLK_CP,    CLK_EXTAL,      2, 1),
+};
+
+static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
+	DEF_MOD("scif2",		 310,	R8A7796_CLK_S3D4),
+	DEF_MOD("intc-ap",		 408,	R8A7796_CLK_S3D1),
+};
+
+static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL2	PLL3	PLL4
+ * 14 13 19 17	(MHz)
+ *-------------------------------------------------------------------
+ * 0  0  0  0	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  0  0  1	16.66 x 1	x180	x192	x144	x128	x144
+ * 0  0  1  0	Prohibited setting
+ * 0  0  1  1	16.66 x 1	x180	x192	x144	x192	x144
+ * 0  1  0  0	20    x 1	x150	x160	x120	x160	x120
+ * 0  1  0  1	20    x 1	x150	x160	x120	x106	x120
+ * 0  1  1  0	Prohibited setting
+ * 0  1  1  1	20    x 1	x150	x160	x120	x160	x120
+ * 1  0  0  0	25    x 1	x120	x128	x96	x128	x96
+ * 1  0  0  1	25    x 1	x120	x128	x96	x84	x96
+ * 1  0  1  0	Prohibited setting
+ * 1  0  1  1	25    x 1	x120	x128	x96	x128	x96
+ * 1  1  0  0	33.33 / 2	x180	x192	x144	x192	x144
+ * 1  1  0  1	33.33 / 2	x180	x192	x144	x128	x144
+ * 1  1  1  0	Prohibited setting
+ * 1  1  1  1	33.33 / 2	x180	x192	x144	x192	x144
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 11) | \
+					 (((md) & BIT(13)) >> 11) | \
+					 (((md) & BIT(19)) >> 18) | \
+					 (((md) & BIT(17)) >> 17))
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
+	/* EXTAL div	PLL1 mult	PLL3 mult */
+	{ 1,		192,		192,	},
+	{ 1,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		192,		192,	},
+	{ 1,		160,		160,	},
+	{ 1,		160,		106,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		160,		160,	},
+	{ 1,		128,		128,	},
+	{ 1,		128,		84,	},
+	{ 0, /* Prohibited setting */		},
+	{ 1,		128,		128,	},
+	{ 2,		192,		192,	},
+	{ 2,		192,		128,	},
+	{ 0, /* Prohibited setting */		},
+	{ 2,		192,		192,	},
+};
+
+static int __init r8a7796_cpg_mssr_init(struct device *dev)
+{
+	const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+	u32 cpg_mode = rcar_gen3_read_mode_pins();
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+	if (!cpg_pll_config->extal_div) {
+		dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode);
+		return -EINVAL;
+	}
+
+	return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR);
+}
+
+const struct cpg_mssr_info r8a7796_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a7796_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a7796_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a7796_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a7796_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a7796_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a7796_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a7796_cpg_mssr_init,
+	.cpg_clk_register = rcar_gen3_cpg_clk_register,
+};
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 210cd744a7a97bbd..e1365e7491ae02a0 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -509,6 +509,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.data = &r8a7795_cpg_mssr_info,
 	},
 #endif
+#ifdef CONFIG_ARCH_R8A7796
+	{
+		.compatible = "renesas,r8a7796-cpg-mssr",
+		.data = &r8a7796_cpg_mssr_info,
+	},
+#endif
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index 0d1e3e811e79bf43..ee7edfaf14089cef 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -131,4 +131,5 @@ struct cpg_mssr_info {
 };
 
 extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
 #endif
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2016-05-30 16:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-30 16:28 [PATCH v2 0/4] clk: renesas: cpg-mssr: Add support for R-Car M3-W Geert Uytterhoeven
2016-05-30 16:28 ` [PATCH v2 1/4] clk: renesas: cpg-mssr: Document r8a7796 support Geert Uytterhoeven
2016-05-30 16:28 ` [PATCH v2 2/4] clk: renesas: Add r8a7796 CPG Core Clock Definitions Geert Uytterhoeven
2016-05-30 16:36   ` Dirk Behme
2016-06-01  3:42     ` Magnus Damm
2016-06-06 12:03     ` Dirk Behme
2016-06-06 12:59       ` Geert Uytterhoeven
2016-06-07  7:53         ` Dirk Behme
2016-06-07  8:17           ` Geert Uytterhoeven
2016-06-09  8:31             ` Dirk Behme
2016-06-09  8:54               ` Geert Uytterhoeven
2016-06-10  6:34                 ` Dirk Behme
2016-06-29  7:58                   ` Dirk Behme
2016-05-30 16:28 ` [PATCH v2 3/4] clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code Geert Uytterhoeven
     [not found] ` <1464625737-6646-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-05-30 16:28   ` Geert Uytterhoeven [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464625737-6646-5-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
    --cc=damm+renesas-yzvPICuk2ACczHhG9Qg4qA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
    --cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).