From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms+renesas@verge.net.au>,
Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-pm@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v2 3/3] soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas
Date: Mon, 30 May 2016 19:05:11 +0200 [thread overview]
Message-ID: <1464627911-8126-4-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1464627911-8126-1-git-send-email-geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
- Add Acked-by.
---
drivers/soc/renesas/Makefile | 1 +
drivers/soc/renesas/r8a7796-sysc.c | 48 ++++++++++++++++++++++++++++++++++++++
drivers/soc/renesas/rcar-sysc.c | 3 +++
drivers/soc/renesas/rcar-sysc.h | 1 +
4 files changed, 53 insertions(+)
create mode 100644 drivers/soc/renesas/r8a7796-sysc.c
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 151fcd3f025b01f3..cd85cd5e6a01517c 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o
obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o
+obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o
diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c
new file mode 100644
index 0000000000000000..f700c842b9e1d010
--- /dev/null
+++ b/drivers/soc/renesas/r8a7796-sysc.c
@@ -0,0 +1,48 @@
+/*
+ * Renesas R-Car M3-W System Controller
+ *
+ * Copyright (C) 2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7796_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7796_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca57-scu", 0x1c0, 0, R8A7796_PD_CA57_SCU, R8A7796_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca57-cpu0", 0x80, 0, R8A7796_PD_CA57_CPU0, R8A7796_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca57-cpu1", 0x80, 1, R8A7796_PD_CA57_CPU1, R8A7796_PD_CA57_SCU,
+ PD_CPU_NOCR },
+ { "ca53-scu", 0x140, 0, R8A7796_PD_CA53_SCU, R8A7796_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca53-cpu0", 0x200, 0, R8A7796_PD_CA53_CPU0, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu1", 0x200, 1, R8A7796_PD_CA53_CPU1, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu2", 0x200, 2, R8A7796_PD_CA53_CPU2, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "ca53-cpu3", 0x200, 3, R8A7796_PD_CA53_CPU3, R8A7796_PD_CA53_SCU,
+ PD_CPU_NOCR },
+ { "cr7", 0x240, 0, R8A7796_PD_CR7, R8A7796_PD_ALWAYS_ON },
+ { "a3vc", 0x380, 0, R8A7796_PD_A3VC, R8A7796_PD_ALWAYS_ON },
+ { "a2vc0", 0x3c0, 0, R8A7796_PD_A2VC0, R8A7796_PD_A3VC },
+ { "a2vc1", 0x3c0, 1, R8A7796_PD_A2VC1, R8A7796_PD_A3VC },
+ { "3dg-a", 0x100, 0, R8A7796_PD_3DG_A, R8A7796_PD_ALWAYS_ON },
+ { "3dg-b", 0x100, 1, R8A7796_PD_3DG_B, R8A7796_PD_3DG_A },
+ { "a3ir", 0x180, 0, R8A7796_PD_A3IR, R8A7796_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7796_sysc_info __initconst = {
+ .areas = r8a7796_areas,
+ .num_areas = ARRAY_SIZE(r8a7796_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 79dbc770895f4b6d..fc997d4d2a4afb7e 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -303,6 +303,9 @@ static const struct of_device_id rcar_sysc_matches[] = {
#ifdef CONFIG_ARCH_R8A7795
{ .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info },
#endif
+#ifdef CONFIG_ARCH_R8A7796
+ { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
+#endif
{ /* sentinel */ }
};
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 5e766174c2f47eb0..4ac3d7bf7f38043c 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -55,4 +55,5 @@ extern const struct rcar_sysc_info r8a7790_sysc_info;
extern const struct rcar_sysc_info r8a7791_sysc_info;
extern const struct rcar_sysc_info r8a7794_sysc_info;
extern const struct rcar_sysc_info r8a7795_sysc_info;
+extern const struct rcar_sysc_info r8a7796_sysc_info;
#endif /* __SOC_RENESAS_RCAR_SYSC_H__ */
--
1.9.1
next prev parent reply other threads:[~2016-05-30 17:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-30 17:05 [PATCH v2 0/3] soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas Geert Uytterhoeven
2016-05-30 17:05 ` [PATCH v2 1/3] soc: renesas: rcar-sysc: Document r8a7796 support Geert Uytterhoeven
2016-05-30 17:05 ` [PATCH v2 2/3] soc: renesas: Add r8a7796 SYSC PM Domain Binding Definitions Geert Uytterhoeven
2016-05-30 17:05 ` Geert Uytterhoeven [this message]
2016-06-06 1:14 ` [PATCH v2 0/3] soc: renesas: rcar-sysc: Add support for R-Car M3-W power areas Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464627911-8126-4-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=damm+renesas@opensource.se \
--cc=devicetree@vger.kernel.org \
--cc=horms+renesas@verge.net.au \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).