From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Cc: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Alan Stern
<stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>,
Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Reinder de Haan
<patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>,
Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines
Date: Thu, 2 Jun 2016 17:14:05 +0200 [thread overview]
Message-ID: <1464880446-5919-2-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1464880446-5919-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
reset lines, the controller will not initialize while the reset for
its companion is still asserted, which means we need to de-assert
2 resets for the controller to work.
Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Use the new reset_control_[de]assert_shared reset-controller functions
---
Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +-
drivers/usb/host/ehci-platform.c | 41 ++++++++++++----------
2 files changed, 24 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index a12d601..0701812 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -18,7 +18,7 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
- - resets : phandle + reset specifier pair
+ - resets : a list of phandle + reset specifier pairs
Example (Sequoia 440EPx):
ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 1757ebb..f4c708f 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -39,11 +39,12 @@
#define DRIVER_DESC "EHCI generic platform driver"
#define EHCI_MAX_CLKS 3
+#define EHCI_MAX_RESETS 2
#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
- struct reset_control *rst;
+ struct reset_control *resets[EHCI_MAX_RESETS];
struct phy **phys;
int num_phys;
bool reset_on_resume;
@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct platform_device *dev)
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ehci_platform_priv *priv;
struct ehci_hcd *ehci;
- int err, irq, phy_num, clk = 0;
+ int err, irq, phy_num, clk = 0, rst = 0;
if (usb_disabled())
return -ENODEV;
@@ -232,18 +233,22 @@ static int ehci_platform_probe(struct platform_device *dev)
break;
}
}
- }
- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
- if (IS_ERR(priv->rst)) {
- err = PTR_ERR(priv->rst);
- if (err == -EPROBE_DEFER)
- goto err_put_clks;
- priv->rst = NULL;
- } else {
- err = reset_control_deassert(priv->rst);
- if (err)
- goto err_put_clks;
+ for (rst = 0; rst < EHCI_MAX_RESETS; rst++) {
+ priv->resets[rst] =
+ devm_reset_control_get_shared_by_index(
+ &dev->dev, rst);
+ if (IS_ERR(priv->resets[rst])) {
+ err = PTR_ERR(priv->resets[rst]);
+ if (err == -EPROBE_DEFER)
+ goto err_reset;
+ priv->resets[rst] = NULL;
+ break;
+ }
+ err = reset_control_deassert(priv->resets[rst]);
+ if (err)
+ goto err_reset;
+ }
}
if (pdata->big_endian_desc)
@@ -300,8 +305,8 @@ err_power:
if (pdata->power_off)
pdata->power_off(dev);
err_reset:
- if (priv->rst)
- reset_control_assert(priv->rst);
+ while (--rst >= 0)
+ reset_control_assert(priv->resets[rst]);
err_put_clks:
while (--clk >= 0)
clk_put(priv->clks[clk]);
@@ -319,15 +324,15 @@ static int ehci_platform_remove(struct platform_device *dev)
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
- int clk;
+ int clk, rst;
usb_remove_hcd(hcd);
if (pdata->power_off)
pdata->power_off(dev);
- if (priv->rst)
- reset_control_assert(priv->rst);
+ for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++)
+ reset_control_assert(priv->resets[rst]);
for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
clk_put(priv->clks[clk]);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-06-02 15:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 15:14 [PATCH v5 resend 0/2] ?hci-platform: Add support for controllers with more then one reset line Hans de Goede
[not found] ` <1464880446-5919-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-02 15:14 ` Hans de Goede [this message]
[not found] ` <1464880446-5919-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-06 13:25 ` [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines Rob Herring
2016-06-08 5:22 ` Greg Kroah-Hartman
[not found] ` <20160608052216.GA7766-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2016-06-08 16:52 ` Hans de Goede
2016-06-08 17:34 ` Greg Kroah-Hartman
2016-06-02 15:14 ` [PATCH v5 resend 2/2] ohci-platform: " Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464880446-5919-2-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).