[PATCH v5 resend 0/2] ?hci-platform: Add support for controllers with more then one reset line

[PATCH v5 resend 0/2] ?hci-platform: Add support for controllers with more then one reset line

[Hans de Goede]

Here is a resend of my last version of the patch set to support usb
controllers which have multiple resets.

The shared reset controller support this depends on has landed in 4.7-rc1,
so this patch-set should be ready for merging now.

Changes in v2:
-Switch to now shared reset_[de]assert functions

Changes in v3:
-Adjust for changes to shared-reset reset-controller functions

Changes in v4:
-Fix Ugly continuation line
-Add Acked-by: Alan Stern <stern <at> xxxxxxxxxxxxxxxxxxx>

Changes in v5:
-No changes, resend for merging into 4.7

Thanks & Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Hans de Goede]

From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>

At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
reset lines, the controller will not initialize while the reset for
its companion is still asserted, which means we need to de-assert
2 resets for the controller to work.

Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-Use the new reset_control_[de]assert_shared reset-controller functions
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
 drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
 2 files changed, 24 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index a12d601..0701812 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -18,7 +18,7 @@ Optional properties:
  - clocks : a list of phandle + clock specifier pairs
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
- - resets : phandle + reset specifier pair
+ - resets : a list of phandle + reset specifier pairs
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 1757ebb..f4c708f 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -39,11 +39,12 @@
 
 #define DRIVER_DESC "EHCI generic platform driver"
 #define EHCI_MAX_CLKS 3
+#define EHCI_MAX_RESETS 2
 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
 
 struct ehci_platform_priv {
 	struct clk *clks[EHCI_MAX_CLKS];
-	struct reset_control *rst;
+	struct reset_control *resets[EHCI_MAX_RESETS];
 	struct phy **phys;
 	int num_phys;
 	bool reset_on_resume;
@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct platform_device *dev)
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
 	struct ehci_hcd *ehci;
-	int err, irq, phy_num, clk = 0;
+	int err, irq, phy_num, clk = 0, rst = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -232,18 +233,22 @@ static int ehci_platform_probe(struct platform_device *dev)
 				break;
 			}
 		}
-	}
 
-	priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-	if (IS_ERR(priv->rst)) {
-		err = PTR_ERR(priv->rst);
-		if (err == -EPROBE_DEFER)
-			goto err_put_clks;
-		priv->rst = NULL;
-	} else {
-		err = reset_control_deassert(priv->rst);
-		if (err)
-			goto err_put_clks;
+		for (rst = 0; rst < EHCI_MAX_RESETS; rst++) {
+			priv->resets[rst] =
+				devm_reset_control_get_shared_by_index(
+								&dev->dev, rst);
+			if (IS_ERR(priv->resets[rst])) {
+				err = PTR_ERR(priv->resets[rst]);
+				if (err == -EPROBE_DEFER)
+					goto err_reset;
+				priv->resets[rst] = NULL;
+				break;
+			}
+			err = reset_control_deassert(priv->resets[rst]);
+			if (err)
+				goto err_reset;
+		}
 	}
 
 	if (pdata->big_endian_desc)
@@ -300,8 +305,8 @@ err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	while (--rst >= 0)
+		reset_control_assert(priv->resets[rst]);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -319,15 +324,15 @@ static int ehci_platform_remove(struct platform_device *dev)
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-	int clk;
+	int clk, rst;
 
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++)
+		reset_control_assert(priv->resets[rst]);
 
 	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Rob Herring]

On Thu, Jun 02, 2016 at 05:14:05PM +0200, Hans de Goede wrote:
> From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
> 
> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> reset lines, the controller will not initialize while the reset for
> its companion is still asserted, which means we need to de-assert
> 2 resets for the controller to work.
> 
> Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> Changes in v2:
> -Use the new reset_control_[de]assert_shared reset-controller functions
> ---
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-

I acked v4. Please add acks when posting new versions.

Rob

>  drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
>  2 files changed, 24 insertions(+), 19 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Greg Kroah-Hartman]

On Thu, Jun 02, 2016 at 05:14:05PM +0200, Hans de Goede wrote:
> From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
> 
> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> reset lines, the controller will not initialize while the reset for
> its companion is still asserted, which means we need to de-assert
> 2 resets for the controller to work.
> 
> Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> ---
> Changes in v2:
> -Use the new reset_control_[de]assert_shared reset-controller functions
> ---
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
>  drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
>  2 files changed, 24 insertions(+), 19 deletions(-)

This patch doesn't apply to my usb-testing branch at all, what went
wrong?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Hans de Goede]

Hi,

On 08-06-16 07:22, Greg Kroah-Hartman wrote:
> On Thu, Jun 02, 2016 at 05:14:05PM +0200, Hans de Goede wrote:
>> From: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
>>
>> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
>> reset lines, the controller will not initialize while the reset for
>> its companion is still asserted, which means we need to de-assert
>> 2 resets for the controller to work.
>>
>> Signed-off-by: Reinder de Haan <patchesrdh-I1/eAgTnXDYAvxtiuMwx3w@public.gmane.org>
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>> Changes in v2:
>> -Use the new reset_control_[de]assert_shared reset-controller functions
>> ---
>>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
>>  drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
>>  2 files changed, 24 insertions(+), 19 deletions(-)
>
> This patch doesn't apply to my usb-testing branch at all, what went
> wrong?

You merged this patch:

https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?id=d0e08b0077f49e209bc90305ddf1ca434ac6cc0e

Which does almost the same, except that it only supports dedicated reset
controllers and not shared reset controllers.

I'll send a new patch which changes things to add support for shared
reset controllers.

This will also bring the ehci-platform reset handling code inline
with ohci-platform again.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 resend 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Greg Kroah-Hartman]

On Wed, Jun 08, 2016 at 06:52:30PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 08-06-16 07:22, Greg Kroah-Hartman wrote:
> > On Thu, Jun 02, 2016 at 05:14:05PM +0200, Hans de Goede wrote:
> > > From: Reinder de Haan <patchesrdh@mveas.com>
> > > 
> > > At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> > > reset lines, the controller will not initialize while the reset for
> > > its companion is still asserted, which means we need to de-assert
> > > 2 resets for the controller to work.
> > > 
> > > Signed-off-by: Reinder de Haan <patchesrdh@mveas.com>
> > > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > > ---
> > > Changes in v2:
> > > -Use the new reset_control_[de]assert_shared reset-controller functions
> > > ---
> > >  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
> > >  drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
> > >  2 files changed, 24 insertions(+), 19 deletions(-)
> > 
> > This patch doesn't apply to my usb-testing branch at all, what went
> > wrong?
> 
> You merged this patch:
> 
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?id=d0e08b0077f49e209bc90305ddf1ca434ac6cc0e
> 
> Which does almost the same, except that it only supports dedicated reset
> controllers and not shared reset controllers.
> 
> I'll send a new patch which changes things to add support for shared
> reset controllers.
> 
> This will also bring the ehci-platform reset handling code inline
> with ohci-platform again.

Thanks, I've merged your new patch now.

greg k-h

[PATCH v5 resend 2/2] ohci-platform: Add support for controllers with multiple reset lines

[Hans de Goede]

At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
reset lines, the controller will not initialize while the reset for
its companion is still asserted, which means we need to de-assert
2 resets for the controller to work.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
Changes in v2:
-New patch in v2 of this patch-set, to complement the identical patch for
 the ehci-platform code
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt |  2 +-
 drivers/usb/host/ohci-platform.c                   | 43 ++++++++++++----------
 2 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 19233b7..9df4569 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -14,7 +14,7 @@ Optional properties:
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
 - phy-names : "usb"
-- resets : phandle + reset specifier pair
+- resets : a list of phandle + reset specifier pairs
 
 Example:
 
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index ae1c988..898b740 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -33,11 +33,12 @@
 
 #define DRIVER_DESC "OHCI generic platform driver"
 #define OHCI_MAX_CLKS 3
+#define OHCI_MAX_RESETS 2
 #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
 
 struct ohci_platform_priv {
 	struct clk *clks[OHCI_MAX_CLKS];
-	struct reset_control *rst;
+	struct reset_control *resets[OHCI_MAX_RESETS];
 	struct phy **phys;
 	int num_phys;
 };
@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv;
 	struct ohci_hcd *ohci;
-	int err, irq, phy_num, clk = 0;
+	int err, irq, phy_num, clk = 0, rst = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -195,19 +196,21 @@ static int ohci_platform_probe(struct platform_device *dev)
 				break;
 			}
 		}
-
-	}
-
-	priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
-	if (IS_ERR(priv->rst)) {
-		err = PTR_ERR(priv->rst);
-		if (err == -EPROBE_DEFER)
-			goto err_put_clks;
-		priv->rst = NULL;
-	} else {
-		err = reset_control_deassert(priv->rst);
-		if (err)
-			goto err_put_clks;
+		for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
+			priv->resets[rst] =
+				devm_reset_control_get_shared_by_index(
+								&dev->dev, rst);
+			if (IS_ERR(priv->resets[rst])) {
+				err = PTR_ERR(priv->resets[rst]);
+				if (err == -EPROBE_DEFER)
+					goto err_reset;
+				priv->resets[rst] = NULL;
+				break;
+			}
+			err = reset_control_deassert(priv->resets[rst]);
+			if (err)
+				goto err_reset;
+		}
 	}
 
 	if (pdata->big_endian_desc)
@@ -265,8 +268,8 @@ err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	while (--rst >= 0)
+		reset_control_assert(priv->resets[rst]);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -284,15 +287,15 @@ static int ohci_platform_remove(struct platform_device *dev)
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-	int clk;
+	int clk, rst;
 
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	if (priv->rst)
-		reset_control_assert(priv->rst);
+	for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++)
+		reset_control_assert(priv->resets[rst]);
 
 	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html