devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] ARM: dts: sun5i: Move display blocks to sun5i.dtsi
Date: Sat,  4 Jun 2016 20:05:24 +0200	[thread overview]
Message-ID: <1465063524-4925-2-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1465063524-4925-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

All sun5i models share, the same die, so the display-engine is
identical, except for which outputs / encoders all available.

All models support parallel / lvds lcd panels, the R8 and A10s also
support tv-out and the A10s also supports HDMI out.

This commit prepares for enabling display blocks on A10s boards,
but it also is a bug-fix for A10s boards, because before this commit
the simplefb nodes for A10s where not listing the recently added
pll3 as clock, causing the display to go block when the kernel
disables unused clocks at the end of boot.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/sun5i-a10s.dtsi |  24 ++---
 arch/arm/boot/dts/sun5i-a13.dtsi  | 182 --------------------------------------
 arch/arm/boot/dts/sun5i.dtsi      | 182 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 189 insertions(+), 199 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index bddd0de..507ec42 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -57,24 +57,13 @@
 	};
 
 	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer",
-				     "simple-framebuffer";
-			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
-			status = "disabled";
-		};
-
 		framebuffer@1 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
-			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&de_be_clk>,
+				 <&tcon_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -82,8 +71,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
-			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>;
+			clocks = <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&de_be_clk>,
+				 <&tcon_ch1_clk>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index e012890..5b6d9fc 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -52,21 +52,6 @@
 / {
 	interrupt-parent = <&intc>;
 
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer",
-				     "simple-framebuffer";
-			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>,
-				 <&tcon_ch0_clk>, <&dram_gates 26>;
-			status = "disabled";
-		};
-	};
-
 	thermal-zones {
 		cpu_thermal {
 			/* milliseconds */
@@ -150,107 +135,9 @@
 					     "apb1_i2c2", "apb1_uart1",
 					     "apb1_uart3";
 		};
-
-		dram_gates: clk@01c20100 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-dram-gates-clk",
-				     "allwinner,sun4i-a10-gates-clk";
-			reg = <0x01c20100 0x4>;
-			clocks = <&pll5 0>;
-			clock-indices = <0>,
-					<1>,
-					<25>,
-					<26>,
-					<29>,
-					<31>;
-			clock-output-names = "dram_ve",
-					     "dram_csi",
-					     "dram_de_fe",
-					     "dram_de_be",
-					     "dram_ace",
-					     "dram_iep";
-		};
-
-		de_be_clk: clk@01c20104 {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c20104 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-be";
-		};
-
-		de_fe_clk: clk@01c2010c {
-			#clock-cells = <0>;
-			#reset-cells = <0>;
-			compatible = "allwinner,sun4i-a10-display-clk";
-			reg = <0x01c2010c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll5 1>;
-			clock-output-names = "de-fe";
-		};
-
-		tcon_ch0_clk: clk@01c20118 {
-			#clock-cells = <0>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
-			reg = <0x01c20118 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon-ch0-sclk";
-		};
-
-		tcon_ch1_clk: clk@01c2012c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
-			reg = <0x01c2012c 0x4>;
-			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
-			clock-output-names = "tcon-ch1-sclk";
-		};
-	};
-
-	display-engine {
-		compatible = "allwinner,sun5i-a13-display-engine";
-		allwinner,pipelines = <&fe0>;
 	};
 
 	soc@01c00000 {
-		tcon0: lcd-controller@01c0c000 {
-			compatible = "allwinner,sun5i-a13-tcon";
-			reg = <0x01c0c000 0x1000>;
-			interrupts = <44>;
-			resets = <&tcon_ch0_clk 1>;
-			reset-names = "lcd";
-			clocks = <&ahb_gates 36>,
-				 <&tcon_ch0_clk>,
-				 <&tcon_ch1_clk>;
-			clock-names = "ahb",
-				      "tcon-ch0",
-				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					tcon0_in_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_out_tcon0>;
-					};
-				};
-
-				tcon0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-			};
-		};
-
 		pwm: pwm@01c20e00 {
 			compatible = "allwinner,sun5i-a13-pwm";
 			reg = <0x01c20e00 0xc>;
@@ -258,75 +145,6 @@
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
-
-		fe0: display-frontend@01e00000 {
-			compatible = "allwinner,sun5i-a13-display-frontend";
-			reg = <0x01e00000 0x20000>;
-			interrupts = <47>;
-			clocks = <&ahb_gates 46>, <&de_fe_clk>,
-				 <&dram_gates 25>;
-			clock-names = "ahb", "mod",
-				      "ram";
-			resets = <&de_fe_clk>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&be0_in_fe0>;
-					};
-				};
-			};
-		};
-
-		be0: display-backend@01e60000 {
-			compatible = "allwinner,sun5i-a13-display-backend";
-			reg = <0x01e60000 0x10000>;
-			clocks = <&ahb_gates 44>, <&de_be_clk>,
-				 <&dram_gates 26>;
-			clock-names = "ahb", "mod",
-				      "ram";
-			resets = <&de_be_clk>;
-			status = "disabled";
-
-			assigned-clocks = <&de_be_clk>;
-			assigned-clock-rates = <300000000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&fe0_out_be0>;
-					};
-				};
-
-				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					be0_out_tcon0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&tcon0_in_be0>;
-					};
-				};
-			};
-		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 0840612..3c8bab9 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -51,6 +51,21 @@
 / {
 	interrupt-parent = <&intc>;
 
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>,
+				 <&tcon_ch0_clk>, <&dram_gates 26>;
+			status = "disabled";
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -338,6 +353,61 @@
 			clock-output-names = "usb_ohci0", "usb_phy";
 		};
 
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-dram-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>,
+					<25>,
+					<26>,
+					<29>,
+					<31>;
+			clock-output-names = "dram_ve",
+					     "dram_csi",
+					     "dram_de_fe",
+					     "dram_de_be",
+					     "dram_ace",
+					     "dram_iep";
+		};
+
+		de_be_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be";
+		};
+
+		de_fe_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe";
+		};
+
+		tcon_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch0-sclk";
+		};
+
+		tcon_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch1-sclk";
+		};
+
 		codec_clk: clk@01c20140 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-codec-clk";
@@ -355,6 +425,11 @@
 		};
 	};
 
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -427,6 +502,44 @@
 			#size-cells = <0>;
 		};
 
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -713,5 +826,74 @@
 			interrupts = <82>, <83>;
 			clocks = <&ahb_gates 28>;
 		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-06-04 18:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-04 18:05 [PATCH 0/1] ARM: dts: sunxi: Fix simplefb not working in 4.7-rc1 Hans de Goede
     [not found] ` <1465063524-4925-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-04 18:05   ` Hans de Goede [this message]
     [not found]     ` <1465063524-4925-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-08 15:28       ` [PATCH] ARM: dts: sun5i: Move display blocks to sun5i.dtsi Peter Korsgaard
2016-06-09  7:46   ` [PATCH 0/1] ARM: dts: sunxi: Fix simplefb not working in 4.7-rc1 Maxime Ripard
2016-06-09 10:47     ` Hans de Goede
     [not found]       ` <21258fc0-0250-951b-2ee7-d022fb3c09ac-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-13  8:01         ` Maxime Ripard
2016-06-13  8:30           ` Hans de Goede
     [not found]             ` <1a9a0d76-5bbf-4b79-abee-1c9dd0436567-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-06-20  7:46               ` Maxime Ripard
2016-06-20 20:56                 ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465063524-4925-2-git-send-email-hdegoede@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).