From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: [PATCH v2 10/13] regulator: pwm: Properly initialize the ->state field Date: Wed, 8 Jun 2016 18:34:45 +0200 Message-ID: <1465403688-17098-11-git-send-email-boris.brezillon@free-electrons.com> References: <1465403688-17098-1-git-send-email-boris.brezillon@free-electrons.com> Return-path: In-Reply-To: <1465403688-17098-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org To: Thierry Reding , linux-pwm@vger.kernel.org, Mark Brown , Liam Girdwood Cc: Heiko Stuebner , linux-rockchip@lists.infradead.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Milo Kim , Doug Anderson , Caesar Wang , Stephen Barber , Brian Norris , Ajit Pal Singh , Srinivas Kandagatla , Maxime Coquelin , Patrice Chotard , kernel@stlinux.com, Laxman Dewangan , Boris Brezillon List-Id: devicetree@vger.kernel.org The ->state field is currently initialized to 0, thus referencing the voltage selector at index 0, which might not reflect the current voltage value. If possible, retrieve the current voltage selector from the PWM state, else return -EINVAL. Signed-off-by: Boris Brezillon Tested-by: Brian Norris --- Heiko, Mark, I know you already added your Tested-by/Acked-by tags on this patch but this version has slightly change and is now making use of the pwm_get_relative_duty_cycle() helper instead of manually converting the absolute duty_cycle value into a relative one. --- drivers/regulator/pwm-regulator.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index bf033fd..8c56e16 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -48,10 +48,31 @@ struct pwm_voltages { /** * Voltage table call-backs */ +static void pwm_regulator_init_state(struct regulator_dev *rdev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); + struct pwm_state pwm_state; + unsigned int dutycycle; + int i; + + pwm_get_state(drvdata->pwm, &pwm_state); + dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100); + + for (i = 0; i < rdev->desc->n_voltages; i++) { + if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) { + drvdata->state = i; + return; + } + } +} + static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); + if (drvdata->state < 0) + pwm_regulator_init_state(rdev); + return drvdata->state; } @@ -203,6 +224,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev, return ret; } + drvdata->state = -EINVAL; drvdata->duty_cycle_table = duty_cycle_table; memcpy(&drvdata->ops, &pwm_regulator_voltage_table_ops, sizeof(drvdata->ops)); -- 2.7.4