From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: [PATCH v2 11/13] regulator: pwm: Retrieve correct voltage Date: Wed, 8 Jun 2016 18:34:46 +0200 Message-ID: <1465403688-17098-12-git-send-email-boris.brezillon@free-electrons.com> References: <1465403688-17098-1-git-send-email-boris.brezillon@free-electrons.com> Return-path: In-Reply-To: <1465403688-17098-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org To: Thierry Reding , linux-pwm@vger.kernel.org, Mark Brown , Liam Girdwood Cc: Heiko Stuebner , linux-rockchip@lists.infradead.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Milo Kim , Doug Anderson , Caesar Wang , Stephen Barber , Brian Norris , Ajit Pal Singh , Srinivas Kandagatla , Maxime Coquelin , Patrice Chotard , kernel@stlinux.com, Laxman Dewangan , Boris Brezillon List-Id: devicetree@vger.kernel.org The continuous PWM voltage regulator is caching the voltage value in the ->volt_uV field. While most of the time this value should reflect the real voltage, sometime it can be sightly different if the PWM device rounded the set_duty_cycle request. Moreover, this value is not valid until someone has modified the regulator output. Remove the ->volt_uV field and always rely on the PWM state to calculate the regulator output. Signed-off-by: Boris Brezillon Reviewed-by: Brian Norris Tested-by: Brian Norris --- Mark, I know you already added your Tested-by/Acked-by tags on this patch but this version has slightly change and is now making use of the pwm_get_relative_duty_cycle() helper instead of manually converting the absolute duty_cycle value into a relative one. --- drivers/regulator/pwm-regulator.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 8c56e16..c39ecd1 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -35,9 +35,6 @@ struct pwm_regulator_data { struct regulator_ops ops; int state; - - /* Continuous voltage */ - int volt_uV; }; struct pwm_voltages { @@ -135,8 +132,13 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev) static int pwm_regulator_get_voltage(struct regulator_dev *rdev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); + int min_uV = rdev->constraints->min_uV; + int diff = rdev->constraints->max_uV - min_uV; + struct pwm_state pstate; - return drvdata->volt_uV; + pwm_get_state(drvdata->pwm, &pstate); + + return min_uV + pwm_get_relative_duty_cycle(&pstate, diff); } static int pwm_regulator_set_voltage(struct regulator_dev *rdev, @@ -162,8 +164,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, return ret; } - drvdata->volt_uV = min_uV; - /* Delay required by PWM regulator to settle to the new voltage */ usleep_range(ramp_delay, ramp_delay + 1000); -- 2.7.4