devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran@ksquared.org.uk>
To: Kieran Bingham <kieran@ksquared.org.uk>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-media@vger.kernel.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-renesas-soc@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/3] dt-bindings: Add Renesas R-Car FDP1 bindings
Date: Thu,  9 Jun 2016 14:41:34 +0100	[thread overview]
Message-ID: <1465479695-18644-4-git-send-email-kieran@bingham.xyz> (raw)
In-Reply-To: <1465479695-18644-1-git-send-email-kieran@bingham.xyz>

The FDP1 is a de-interlacing module which converts interlaced video to
progressive video. It is also capable of performing pixel format conversion
between YCbCr/YUV formats and RGB formats.

Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
---
 .../devicetree/bindings/media/renesas,fdp1.txt     | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,fdp1.txt

diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
new file mode 100644
index 000000000000..e2da2aec5e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
@@ -0,0 +1,34 @@
+Renesas R-Car Fine Display Processor (FDP1)
+-----------------------------------------------
+
+The FDP1 is a de-interlacing module which converts interlaced video to
+progressive video. It is capable of performing pixel format conversion between
+YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
+an input to the module.
+
+ - compatible: Must be one or more of the following
+
+   - "renesas,r8a7795-fdp1" for R8A7795 (R-Car H3)
+   - "renesas,r8a7796-fdp1" for R8A7796 (R-Car M3-W)
+   - "renesas,fdp1" for generic compatible
+
+   When compatible with the generic version, nodes must list the
+   SoC-specific version corresponding to the platform first, followed by the
+   family-specific and/or generic versions.
+
+ - reg: the register base and size for the device registers
+ - clocks: Reference to the functional clock
+ - renesas,fcp: Reference to the FCPF connected to the FDP1
+
+
+Device node example
+-------------------
+
+	fdp1ch1: fdp1@fe940000 {
+		compatible = "renesas,r8a7795-fdp1", "renesas,fdp1";
+		reg = <0 0xfe940000 0 0x2400>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 119>;
+		power-domains = <&sysc R8A7795_PD_A3VP>;
+		renesas,fcp = <&fcpf0>;
+	};
\ No newline at end of file
-- 
2.7.4

  parent reply	other threads:[~2016-06-09 13:41 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1465479695-18644-1-git-send-email-kieran@bingham.xyz>
2016-06-09 13:41 ` [PATCH 1/3] dt-bindings: Update Renesas R-Car FCP DT binding Kieran Bingham
2016-06-10 17:37   ` Rob Herring
2016-06-13 11:28     ` Kieran Bingham
     [not found]   ` <1465479695-18644-2-git-send-email-kieran-SI8QzZ7I9JUn3X9lZQuFcg@public.gmane.org>
2016-06-13 12:17     ` Laurent Pinchart
2016-06-09 13:41 ` [PATCH 2/3] dt-bindings: Document Renesas R-Car FCP power-domains usage Kieran Bingham
     [not found]   ` <1465479695-18644-3-git-send-email-kieran-SI8QzZ7I9JUn3X9lZQuFcg@public.gmane.org>
2016-06-10 17:39     ` Rob Herring
2016-06-10 19:11       ` Geert Uytterhoeven
2016-06-10 21:33         ` Rob Herring
2016-06-12  8:46           ` Geert Uytterhoeven
2016-06-09 13:41 ` Kieran Bingham [this message]
2016-06-10 17:40   ` [PATCH 3/3] dt-bindings: Add Renesas R-Car FDP1 bindings Rob Herring
2016-06-13 11:31     ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465479695-18644-4-git-send-email-kieran@bingham.xyz \
    --to=kieran@ksquared.org.uk \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).