From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajesh Bhagat Subject: [PATCH 3/3] arm: dts: ls1043a: Add dis_rxdet_inp3_quirk property to USB3 node Date: Fri, 10 Jun 2016 11:53:46 +0530 Message-ID: <1465539826-5519-4-git-send-email-rajesh.bhagat@nxp.com> References: <1465539826-5519-1-git-send-email-rajesh.bhagat@nxp.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1465539826-5519-1-git-send-email-rajesh.bhagat@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: shawnguo@kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, sriram.dash@nxp.com, Rajesh Bhagat List-Id: devicetree@vger.kernel.org Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property is used to disable rx detection in P3 PHY mode. Signed-off-by: Rajesh Bhagat --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index de0323b..ba30f02 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -422,6 +422,7 @@ interrupts = <0 60 0x4>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb1: usb3@3000000 { @@ -430,6 +431,7 @@ interrupts = <0 61 0x4>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb2: usb3@3100000 { @@ -438,6 +440,7 @@ interrupts = <0 63 0x4>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; sata: sata@3200000 { -- 2.6.2.198.g614a2ac