From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 00/19] ARM: dts: renesas: Name pfc subnodes after device names
Date: Fri, 10 Jun 2016 15:00:46 +0200 [thread overview]
Message-ID: <1465563665-2231-1-git-send-email-geert+renesas@glider.be> (raw)
Hi Simon, Magnus,
Currently board DTS files use various naming conventions for the Pin
Function Controller subnodes. This may cause conflicts when enabling
support for more instances later, either directly in board DT files, or
in DT overlays. These conflicts are most likely to happen for devices
that use/require aliases (e.g. "serial1"), or when using generic and
indexless names (e.g. "mmc"). Hence this series changes the names of
(most of) the submodes, to match the corresponding device names, which
are unique on a specific SoC.
I did not change the following node names:
- "sdX", as they always matched the corresponding "sdhiX" name,
- "touchscreen", as there's not much opportunity for conflicts,
- "mmc", for "mmcif_pins" on sh73a0/kzm9g (which has a single mmc
instance),
- "sounda" for fsia_pins on SH-Mobile,
If you think these should be changed too, please let me know.
This series is against renesas-devel-20160606-v4.7-rc2.
Thanks!
Geert Uytterhoeven (19):
ARM: dts: ape6evm: Name serial port pfc subnode after device name
ARM: dts: ape6evm: Name mmc pfc subnode after device name
ARM: dts: armadillo800eva: Name serial port pfc subnode after device
name
ARM: dts: bockw: Name serial port pfc subnode after device name
ARM: dts: marzen: Name serial port pfc subnodes after device names
ARM: dts: lager: Name serial port pfc subnodes after device names
ARM: dts: lager: Name spi pfc subnodes after device names
ARM: dts: lager: Name vin pfc subnode after device name
ARM: dts: koelsch: Name serial port pfc subnodes after device names
ARM: dts: koelsch: Name spi pfc subnodes after device names
ARM: dts: porter: Name serial port pfc subnode after device name
ARM: dts: porter: Name spi pfc subnode after device name
ARM: dts: gose: Name serial port pfc subnodes after device names
ARM: dts: gose: Name spi pfc subnode after device name
ARM: dts: alt: Name serial port pfc subnode after device name
ARM: dts: alt: Name spi pfc subnode after device name
ARM: dts: silk: Name serial port pfc subnode after device name
ARM: dts: silk: Name spi pfc subnode after device name
ARM: dts: kzm9g: Name serial port pfc subnode after device name
arch/arm/boot/dts/r8a73a4-ape6evm.dts | 4 ++--
arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +-
arch/arm/boot/dts/r8a7778-bockw.dts | 2 +-
arch/arm/boot/dts/r8a7779-marzen.dts | 4 ++--
arch/arm/boot/dts/r8a7790-lager.dts | 10 +++++-----
arch/arm/boot/dts/r8a7791-koelsch.dts | 8 ++++----
arch/arm/boot/dts/r8a7791-porter.dts | 4 ++--
arch/arm/boot/dts/r8a7793-gose.dts | 6 +++---
arch/arm/boot/dts/r8a7794-alt.dts | 4 ++--
arch/arm/boot/dts/r8a7794-silk.dts | 4 ++--
arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +-
11 files changed, 25 insertions(+), 25 deletions(-)
--
1.9.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next reply other threads:[~2016-06-10 13:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 13:00 Geert Uytterhoeven [this message]
2016-06-10 13:00 ` [PATCH 01/19] ARM: dts: ape6evm: Name serial port pfc subnode after device name Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 04/19] ARM: dts: bockw: " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 08/19] ARM: dts: lager: Name vin " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 09/19] ARM: dts: koelsch: Name serial port pfc subnodes after device names Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 11/19] ARM: dts: porter: Name serial port pfc subnode after device name Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 12/19] ARM: dts: porter: Name spi " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 13/19] ARM: dts: gose: Name serial port pfc subnodes after device names Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 16/19] ARM: dts: alt: Name spi pfc subnode after device name Geert Uytterhoeven
[not found] ` <1465563665-2231-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2016-06-10 13:00 ` [PATCH 02/19] ARM: dts: ape6evm: Name mmc " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 03/19] ARM: dts: armadillo800eva: Name serial port " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 05/19] ARM: dts: marzen: Name serial port pfc subnodes after device names Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 06/19] ARM: dts: lager: " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 07/19] ARM: dts: lager: Name spi " Geert Uytterhoeven
2016-06-10 13:00 ` [PATCH 10/19] ARM: dts: koelsch: " Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 14/19] ARM: dts: gose: Name spi pfc subnode after device name Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 15/19] ARM: dts: alt: Name serial port " Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 17/19] ARM: dts: silk: " Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 18/19] ARM: dts: silk: Name spi " Geert Uytterhoeven
2016-06-10 13:01 ` [PATCH 19/19] ARM: dts: kzm9g: Name serial port " Geert Uytterhoeven
2016-06-14 0:13 ` [PATCH 00/19] ARM: dts: renesas: Name pfc subnodes after device names Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465563665-2231-1-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).