devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v2 16/17] sh: I/O DATA HDL-U (a.k.a. landisk) Device Tree
Date: Sun, 12 Jun 2016 15:54:34 +0900	[thread overview]
Message-ID: <1465714475-24111-17-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1465714475-24111-1-git-send-email-ysato@users.sourceforge.jp>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 arch/sh/boot/dts/landisk.dts | 150 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)
 create mode 100644 arch/sh/boot/dts/landisk.dts

diff --git a/arch/sh/boot/dts/landisk.dts b/arch/sh/boot/dts/landisk.dts
new file mode 100644
index 0000000..23396a0
--- /dev/null
+++ b/arch/sh/boot/dts/landisk.dts
@@ -0,0 +1,150 @@
+#include <dt-bindings/interrupt-controller/sh_intc.h>
+
+/dts-v1/;
+/ {
+	model = "I/O DATA HDL-U";
+	compatible = "iodata,hdl-u";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&shintc>;
+	chosen {
+		stdout-path = &sci1;
+		bootargs = "console=ttySC1,115200";
+	};
+	aliases {
+		serial0 = &sci0;
+		serial1 = &sci1;
+	};
+
+	oclk: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <22222222>;
+        };
+        pllclk: pllclk {
+                compatible = "renesas,sh7750-pll-clock";
+                clocks = <&oclk>;
+                #clock-cells = <0>;
+		renesas,mult = <12>;
+                reg = <0xffc00000 2>, <0xffc00008 4>;
+        };
+        iclk: iclk {
+                compatible = "renesas,sh7750-div-clock";
+                clocks = <&pllclk>;
+                #clock-cells = <0>;
+                reg = <0xffc00000 2>;
+		renesas,offset = <6>;
+		clock-output-names = "ick";
+        };
+        bclk: bclk {
+                compatible = "renesas,sh7750-div-clock";
+                clocks = <&pllclk>;
+                #clock-cells = <0>;
+                reg = <0xffc00000 2>;
+		renesas,offset = <3>;
+		clock-output-names = "bck";
+        };
+        fclk: fclk {
+                compatible = "renesas,sh7750-div-clock";
+                clocks = <&pllclk>;
+                #clock-cells = <0>;
+                reg = <0xffc00000 2>;
+		renesas,offset = <0>;
+		clock-output-names = "fck";
+        };
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+		      compatible = "renesas,sh4", "renesas,sh";
+		      clock-frequency = <266666666>;
+		};
+	};
+	memory@0c000000 {
+		device_type = "memory";
+		reg = <0x0c000000 0x4000000>;
+	};
+	shintc: interrupt-controller@ffd00000 {
+		compatible = "renesas,sh7751-intc";
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-controller;
+		reg = <0xffd00000 14>, <0xfe080000 128>;
+
+	};
+	cpldintc: cpld@b0000000 {
+		compatible = "iodata,landisk-intc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xb0000000 8>;
+		interrupt-map=<0 &shintc 0 0>, <1 &shintc 1 0>,
+		              <2 &shintc 2 0>, <3 &shintc 3 0>,
+		              <4 &shintc 4 0>, <5 &shintc 5 0>,
+		              <6 &shintc 6 0>, <7 &shintc 7 0>;
+	};
+	sci0: serial@ffe00000 {
+		compatible = "renesas,scif";
+		reg = <0xffe00000 0x20>;
+		interrupts = <evt2irq(0x4e0) 0
+		              evt2irq(0x500) 0
+		              evt2irq(0x540) 0
+		              evt2irq(0x520) 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+	sci1: serial@ffe80000 {
+		compatible = "renesas,scif";
+		reg = <0xffe80000 0x100>;
+		interrupts = <evt2irq(0x700) 0
+			      evt2irq(0x720) 0
+			      evt2irq(0x760) 0
+			      evt2irq(0x740) 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+	};
+	tmu: timer@ffd80000 {
+		compatible = "renesas,tmu";
+		reg = <0xffd80000 12>;
+		interrupts = <evt2irq(0x400) 0
+			      evt2irq(0x420) 0
+			      evt2irq(0x440) 0>;
+		clocks = <&fclk>;
+		clock-names = "fck";
+		renesas,channels-mask = <0x03>;
+	};
+
+	pci: pci-controller@fe200000 {
+		compatible = "renesas,sh7751-pci", "iodata,landisk";
+		device_type = "pci";
+		bus-range = <0 0>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
+		         <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
+		reg = <0xfe200000 0x0400>,
+		      <0x0c000000 0x04000000>,
+		      <0xff800000 0x0030>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x1800 0 7>;
+		interrupt-map = <0x0000 0 1 &cpldintc evt2irq(0x2a0) 0
+		                 0x0000 0 2 &cpldintc evt2irq(0x2c0) 0
+		                 0x0000 0 3 &cpldintc evt2irq(0x2e0) 0
+		                 0x0000 0 4 &cpldintc evt2irq(0x300) 0
+
+		                 0x0800 0 1 &cpldintc evt2irq(0x2c0) 0
+		                 0x0800 0 2 &cpldintc evt2irq(0x2e0) 0
+		                 0x0800 0 3 &cpldintc evt2irq(0x300) 0
+		                 0x0800 0 4 &cpldintc evt2irq(0x2a0) 0
+
+		                 0x1000 0 1 &cpldintc evt2irq(0x2e0) 0
+		                 0x1000 0 2 &cpldintc evt2irq(0x300) 0
+		                 0x1000 0 3 &cpldintc evt2irq(0x2a0) 0
+		                 0x1000 0 4 &cpldintc evt2irq(0x2c0) 0
+
+		                 0x1800 0 1 &cpldintc evt2irq(0x300) 0
+		                 0x1800 0 2 &cpldintc evt2irq(0x2a0) 0
+		                 0x1800 0 3 &cpldintc evt2irq(0x2c0) 0
+		                 0x1800 0 4 &cpldintc evt2irq(0x2e0) 0>;
+	};
+};
-- 
2.7.0


  parent reply	other threads:[~2016-06-12  6:54 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1465714475-24111-1-git-send-email-ysato@users.sourceforge.jp>
2016-06-12  6:54 ` [PATCH v2 12/17] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-06-13  8:04   ` Geert Uytterhoeven
2016-06-13  8:38   ` Arnd Bergmann
2016-06-13 15:23     ` Yoshinori Sato
2016-06-12  6:54 ` [PATCH v2 14/17] sh: SH3/4 Generic IRQCHIP driever Yoshinori Sato
2016-06-12  7:43   ` Yoshinori Sato
2016-06-14 22:14     ` Rob Herring
2016-06-12  6:54 ` Yoshinori Sato [this message]
2016-06-13  8:13   ` [PATCH v2 16/17] sh: I/O DATA HDL-U (a.k.a. landisk) Device Tree Geert Uytterhoeven
2016-06-13 14:23     ` Yoshinori Sato
     [not found] ` <1465714475-24111-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-06-12  6:54   ` [PATCH v2 17/17] sh: landisk CPLD interrupt controller driver Yoshinori Sato
2016-06-12  7:44     ` Yoshinori Sato
2016-06-14 22:24       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465714475-24111-17-git-send-email-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).